Cylinda DM3434C Dishwashers User Manual

: June 13, 2024
: Cylinda

Table of Contents

DM3434C Dishwashers
Product Information
Technical Specifications
Features
- Product Usage Instructions
1. Safety Instructions
2. Environmental Instructions
3. Your Dishwasher
4. Installation
5. Preparation
6. Operating the Product
7. Maintenance and Cleaning

DM3434C Dishwashers

Product Information

The DM 3343 D dishwasher is a high-quality product manufactured
using the latest technology in environmentally friendly conditions.
It offers a range of features and functions to make dishwashing
efficient and convenient.

Technical Specifications

Model: DM 3343 D
Dimensions: [insert dimensions]
Weight: [insert weight]
Capacity: [insert capacity]
Power Supply: [insert power supply requirements]
Water Supply: [insert water supply requirements]

Features

Adjustable height upper basket
Collapsible upper basket wires
Ceiling cutlery basket
Aquasafe+ water supply connection
Water softening system
Detergent and rinse aid dispenser
Multiple basket configurations for flexible loading

Product Usage Instructions

1. Safety Instructions

Before using the dishwasher, please read and follow all safety
instructions provided in the user manual to ensure safe
operation.

2. Environmental Instructions

This product complies with the WEEE Directive for proper
disposal of electronic waste. Please follow the guidelines in the
user manual to dispose of the waste product correctly. The package
information is also provided to assist with recycling or proper
disposal.

3. Your Dishwasher

This section provides an overview of the dishwasher and
instructions on adjusting the height of the upper basket, using the
multi-function service rack, and utilizing the collapsible upper
basket wires and ceiling cutlery basket.

4. Installation

Before installing the dishwasher, refer to the appropriate
installation location guidelines. Connect the water supply using
the Aquasafe+ system and ensure proper drainage. Adjust the feet
for stability and complete the electrical connection following the
provided instructions.

5. Preparation

Learn energy-saving tips and instructions for adjusting the
water softening system, adding salt, choosing the right detergent
and rinse aid, and understanding which items are not suitable for
washing in the dishwasher. Follow the guidelines for loading the
dishes, using the cutlery basket, collapsible lower basket tines,
tray wash supports, SoftTouch accessory, lower basket glass holder,
and upper basket height adjustable rack.

6. Operating the Product

This section covers the operation of the dishwasher, including
selecting wash programs, adjusting settings, and understanding the
different indicators and functions.

7. Maintenance and Cleaning

Properly clean and maintain the outer surface and interior of
the dishwasher using the recommended cleaning methods and
materials. Regular maintenance will ensure optimal performance and
longevity of the product.

For more detailed instructions and information, please refer to
the complete user manual included with your dishwasher.

User manual

DM 3343 D DM 3343 RFD DM3234D DM3205E DM3205RFE

DM3238C DM3238RFC DM3434C DM3434RFC
15 8729 0100_AB_CYLINDA_D1_EN/ 03-02-23.(10:26)

Dear Customer, Please read this user manual before using the product. Thank you for choosing this product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents before using the product. Follow all warnings and information in the user manual. Thus, you can protect yourself and your product against potential dangers. Keep the user manual. If you handover the product to someone else, give the user manual as well. The following symbols are used in the user manual and on the packaging:
Danger that may result in death or injury. NOTICE Danger that may result in damage to the product or its surroundings.
Important information or useful hints about usage.
Read the user manual.
This product was manufactured using the latest technology in environmentally friendly conditions.

CONTENTS

1 SAFETY INSTRUCTIONS 4
Intended Use …………………………………………….. 4 Safety for children, vulnerable persons and pets4 Electrical safety …………………………………………. 5 Transportation Safety …………………………………. 5 Installation Safety ………………………………………. 6 Operational safety ……………………………………… 7 Maintenance and cleaning safety …………………. 8 Interior Lighting………………………………………….. 8

2 ENVIRONMENTAL

INSTRUCTIONS

8

Compliance with WEEE Directive and Disposing

of the Waste Product ………………………………….. 8

Package information…………………………………… 9

Technical specifications …………………………….. 10

3 YOUR DISHWASHER

11

Overview…………………………………………………..11

Adjusting the height of the upper basket ……… 27 Upper basket multi-function service rack……… 28 Collapsible upper basket wires…………………… 29 Height setting with empty basket………………… 29 Ceiling cutlery basket ……………………………….. 30 Ceiling cutlery basket ……………………………….. 30
6 OPERATING THE PRODUCT31
Keys……………………………………………………….. 31 Preparing the machine ……………………………… 31 Programme selection………………………………… 31 Auxiliary functions…………………………………….. 31 Programming the washing time ………………….. 34 Starting the programme…………………………….. 34 Child (Key) Lock ………………………………………. 35 Cancelling the programme ………………………… 35 End of programme……………………………………. 36 Overflowing warning …………………………………. 36 Adjusting the amount of rinse aid ……………….. 36 InnerClean ………………………………………………. 37

4 INSTALLATION

12

Appropriate installation location………………….. 12

Connecting water supply …………………………… 12

Aquasafe+ ……………………………………………… 13

Connection to the drain …………………………….. 14

Adjusting the feet……………………………………… 14

Electrical connection…………………………………. 14

5 PREPARATION

15

Tips for energy saving ………………………………. 15

Water softening system …………………………….. 15

Adjusting the water softening system ………….. 15

Adding salt………………………………………………. 16

Detergent………………………………………………… 16

Tablet detergents ……………………………………… 18

Rinse aid…………………………………………………. 18

Items not suitable for washing in the

dishwasher ……………………………………………… 19

Placing the dishes into the dishwasher ……….. 19

Cutlery basket …………………………………………. 21

Collapsible lower basket tines ……………………. 22

Tray Wash Supports …………………………………. 23

SoftTouch Accessory ………………………………… 23

Lower Basket Glass Holder ……………………….. 23

Lower basket multipurpose / height adjustable

service rack …………………………………………….. 24

Lower basket bottle wire……………………………. 25

Upper basket height adjustable rack …………… 25

Upper basket multipurpose service rack ……… 25

Adjusting the height of the upper basket ……… 26

7 MAINTENANCE AND

CLEANING

38

Cleaning the outer surface of the product ……. 38

Cleaning the interior of the machine……………. 38

Cleaning the filters……………………………………. 38

Cleaning the hose filter……………………………… 39

Cleaning the impellers ………………………………. 40

Lower impeller …………………………………………. 40

Upper impeller ………………………………………… 40

8 TROUBLESHOOTING

41

1- Safety Instructions
· This section contains safety instructions that will help get protected against risks of personal injury or property damage.
· Our company shall not be responsible for damages that may arise when these instructions are not followed.
Installation and repair procedures must always be performed by the manufacturer, authorised service agent or a qualified person specified by the importer.
Only use original parts and accessories.
Do not repair or replace any part of the product unless specified expressly in the user manual.
Do not make any technical modifications to the product.
Intended Use
This product is designed to be used in houses and indoor places. For example:
– Personnel kitchens in stores, offices and other working environments; – Farm houses; – Areas used by customers at hotels, motels and other types of accommodation; – Bed&breakfast type hotels, boardinghouses.
4/EN

This product must be used to do the domestic type dishes only.
This product is not suitable for commercial or collective use.
·
Safety for children, vulnerable persons and pets
This product can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out.
Children below the age of 3 must be kept away from the product unless they are continuously supervised.
Electrical products are dangerous for children and pets. Children and pets must not play with, climb on or enter inside the product.
Do not forget to close the door of the product when leaving the room where it is located. Children and pets may remain locked inside the product and suffocate.
Cleaning and user maintenance works should not be performed by children unless they are supervised by someone.

Keep packaging materials away from children. There is the risk of injury and suffocation.
Store all detergents and additives used with the product in a safe place away from the reach of children.
For children’s safety, cut the power cable and break the locking mechanism so that it will be non-functional before disposing of the product.
Electrical safety
The product must be unplugged during installation, maintenance, cleaning, repairing and moving procedures.
If the power cable is damaged, it must be replaced by a qualified person specified by the manufacturer, authorised service agent or importer in order to avoid potential dangers.
Do not squeeze the power cable under or behind the product. Do not place heavy objects on the power cable. Power cable must not be bent excessively, pinched or come into contact with any heat sources.
Do not use extension cords, multi-sockets or adapters to operate the product.
Plug must be easily accessible. If this is not

possible, the electrical installation where the product is connected must contain a device which conforms to the electrical regulations and disconnects all poles from the grid. Do not touch the power plug with wet hands. Remove the plug from the socket by gripping the plug and not the cable.
Transportation Safety Before transporting the product unplug it and disconnect its drain and water supply connections. Drain the remaining water in the product completely. Product is heavy, do not move it alone.
NOTICE Do not hold the product from its door or panel to move it.
NOTICE If you need to move the product, do it in upright position and hold from the rear side. Slanting the product to front may cause the electronic parts in it to get wet and damaged.
NOTICE Make sure that the hoses do not get kinked, squeezed or crushed while placing the product into its location after installation or cleaning procedures.
5/EN

Installation Safety
· To make the product ready for use, review the information in the user manual and installation instructions and make sure that the electricity, water supply and drain systems are appropriate. If they are not, call a qualified technician and plumber to have the necessary arrangements carried out. These procedures are under customer’s responsibility.
· Prior to installation, check if the product has any defects on it. If the product is damaged, do not have it installed.
· Do not install the product in environments where the temperature falls below 0ºC.
Do not place the product on carpets or similar surfaces. This may cause fire hazard since the product will not be ventilated from below.
Place the product on a clean, flat and solid surface and balance it with adjustable feet. If the feet are not adjusted properly, the door will not be closed completely and cause hot steam to escape. Otherwise, it might cause serious burns and injuries, and harm your furniture.
Do not install the product close to heat sources (heater,

stove and etc.) or under the cooking area of a hob.
· If the product is going to be used inside a wardrobe/ cabinet/module, keep the doors of the wardrobe/cabinet/ module open during operation in cases where there are no openings to provide sufficient air circulation.
Plug the product in a grounded socket protected by a fuse with current values as per type label of the product. Have the grounding installation made by a qualified electrician. Do not use the product without having the grounding made as per local/national regulations.
Plug the product in a socket that conforms the voltage and frequency values stated on the type label of the product.
Do not plug the product in sockets that are loose, dislocated, broken, dirty, greasy or bear the risk of getting in contact with water, such as places where there might be water leak from the counter.
NOTICE You must use the new hose set provided with the product. Do not reuse the old hose set. Do not make extension at the hoses.
NOTICE Connect the water inlet hose directly to the water tap.

6/EN

Pressure coming from the tap should be 0.03 MPa (0.3 bars) minimum and 1MPa (10 bars) maximum. If the water pressure exceeds 1 MPa (10 Bars), a pressure relief valve should be installed in between.
Route the power cable and hoses in a way that they do not cause risk of tripping.
Operational safety
· Only dishwasher safe detergents, rinse aids and additives must be used.
Never use chemical solvents in the product. They bring forth the risk of explosion.
The wash-water inside the product is not potable.
Dishwasher detergents have high alkali content and can be very dangerous when ingested. Avoid letting them get into contact with skin and eyes and keep children away from the product when its door is open. Make sure that the detergent dispenser is empty after the washing cycle is complete.
When you pull the upper and lower baskets out completely, the door of the product will bear all the weight of the baskets. Do not sit or put other loads on the door; otherwise, the product may tilt.

Maximum washing capacity of the product is stated in the section called “Technical Specifications”.
To prevent possible injuries, always place the sharp and pointed dishes such as service fork, bread knife, etc. upside down so as their pointed ends face down or they lie horizontally in the dish basket.
Open the door of the product carefully if you need to do so when the product is running. Be careful against hot steam that may escape or hot water that may spill.
Do not start the broken or damaged product. Unplug the product (or switch off the fuse it is connected to), turn off the water tap and call the authorised service agent.
Do not place flame sources (lit candles, cigarettes, etc.) on or close to the product. Do not keep combustable/ flammable substances close to the product.
Do not climb on the product.
· Unplug the product and close the tap if you are not going to use it for a long time.

7/EN

Maintenance and cleaning 2- Environmental

safety

Instructions

Do not wash the product by

spreading or pouring water Compliance with WEEE

onto it.

Directive and Disposing of

Do not use sharp or abrasive the Waste Product

tools when cleaning the

This product complies with

product. Do not use home

EU WEEE Directive (2012/19/

cleaning products, detergent, EU). This product bears a

gas, gasoline, thinner, alcohol, classification symbol for

varnish etc.

waste electrical and electronic

equipment (WEEE).

NOTICE Do not forget to install

This symbol indicates

the product’s filter back after you

that this product shall

have cleaned it. Otherwise, pumps

not be disposed with

will get clogged and product will be

other household wastes

damaged.

at the end of its service

Interior Lighting
Depending on the model of your product, call the authorised service agent when it is required to change the LED/bulb used for lighting.

life. Used device must be returned to official collection point for recycling of electrical and electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was

purchased. Each household

performs important role in

recovering and recycling of old

appliance. Appropriate disposal

of used appliance helps prevent

potential negative consequences

for the environment and human

health.

Compliance with RoHS

Directive

The product you have purchased

complies with EU RoHS Directive

(2011/65/EU). It does not contain

harmful and prohibited materials

specified in the Directive.

8/EN

Package information Packaging materials of the product are manufactured from recyclable materials in
accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
9/EN

Note for test institutions: Data required for performance tests shall be provided upon request. Requests can be e-mailed to the following address: dishwasher@standardloading.com Do not forget to provide the code, stock number and serial number of the product to be tested in your request e-mail along with your contact information. Code, stock number and serial number of the product may be found on the type label attached to the side wall of the door. Compliance to standards and test data/EC declaration of conformity
Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436 / EN 60436

Technical specifications
Maximum washing capacity (check the energy label and Programme data and average consumption values table given on Quick Guide. )
Height (check installation document for installation) Width: 60 Depth: 57
Power input: 220-240 V, 50 Hz Total power 1800-2100 W Heater power: 1800 W

Total current: 10 A Pump power: 90 – 125 W Drain pump power: 30 W For detailed electrical values, check the type label on the machine door.

The model information as stored in the product database can be reached by entering following website and searching your model identifier () found on energy label. https://eprel.ec.europa.eu/
XXXXXXXXXX ()

Water Pressure 0.3 10 bar (= 3 100 N/cm² = 0.03-1.0 Mpa)
Technical specifications may be changed without prior notice to improve the quality of the product.
Figures in this manual are schematic and may not match the product exactly.
Values stated on the markings of the product or in the printed documents accompanying the product are obtained in the laboratory on basis of the relevant standards. These values may vary according to the usage of the product and ambient conditions.

10/EN

3- Your dishwasher
Overview

1. Upper basket

15

2. Upper impeller

3. Lower impeller

4. Cutlery basket (depends on model)

5. Door

6. Rating Label

7. Control panel

8. Detergent dispenser

9. Lower basket

15

10. Filters

11. Salt reservoir lid

12. Upper basket rail

13. Upper cutlery basket (depends on model)

14. Tabletop (depends on model)

15. Fan drying system (depends on model)

11/EN

4- Installation
Read “Safety Instructions” section first! Installation procedures must always be performed by the manufacturer, authorised service agent or a qualified person specified by the importer. To make the product ready for use, make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the authorised service agent. If they are not, call a qualified technician and plumber to have the necessary arrangements carried out.
Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer’s responsibility.
Installation and electrical connections must be carried out by the authorised service agent. Manufacturer shall not be held responsible for damages arising from processes carried out by unauthorised persons.
Prior to installation, check if the product has any defects on it. If the product is damaged, do not have it installed. Damaged products cause risks for your safety.
Make sure that the water inlet and discharge hoses are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.
The front of the appliance may not be removed on free-standing or under- thecounter models. The warranty will be void if this is done.
When placing the product, pay attention not to damage the floor, walls, piping, etc. Do not hold the product from its door or panel to move it.

Appropriate installation location
In the area where this product is installed, there must not be a lockable, sliding or hinged door that will restrict full opening of the product’s door.
Make sure that you select a location that will allow you to load and unload the dishes in a fast and comfortable manner.
· Place the product on a solid and flat floor that has sufficient load carrying capacity! The product must be installed on a flat surface in order for the door to be closed properly and securely.
· Do not install the product at places where temperature may fall below 0ºC.
· Place the product on a hard floor. Do not place it on a long pile rug or similar surfaces.
Do not place the product on the power cable.
· Make sure that you select a location that will allow you to load and unload the dishes in a fast and comfortable manner.
· Install the product at a place close to the tap and the drain hole. Select the installation location by considering that it will not be changed after the connections are made.
Connecting water supply
We recommend installing a filter at the water inlet in order to prevent the dirt (sand, clay, rust) in the mains or water installation of your home from damaging the machine or the dishes.

12/EN

Permitted water temperature: up to 25°C ( 60°C for products equipped with Aquasafe+; please refer to Aquasafe+ section ) The dishwasher may not be connected to open warm water devices or flow-through water heaters.
NOTICE Do not use an old or used water inlet hose on the new product. Use the new water inlet hose supplied with the product. Do not make extension at the hoses.
NOTICE Connect the water inlet hose directly to the water tap. Pressure coming from the tap should be 0.3 bars minimum and 10 bars maximum. If the water pressure exceeds 10 bars, a pressure relief valve should be installed in between.
NOTICE The water supply and draining hoses must be securely fastened and remain undamaged.
NOTICE Open the taps completely after making the connections to check for water leaks.

Aquasafe+ (depends on the model) The Aquasafe+ system protects against water leaks that may occur at the hose inlet.Water contact with the valve box of the system must be avoided to prevent damage to the electrical system.
As the hose set contains electrical connections and assemblies, never shorten or lengthen the hose with extension hoses. If the Aquasafe+ system is damaged, unplug the product and call the authorised service agent.

13/EN

Connection to the drain Water discharge hose can directly be connected to the drain hole or sink’s drainage. See the installation manual supplied with your machine for detailed information.

mm
Drain pipe must be connected to the sewage system and it should not be connected to any surface water.

max 1000 min 500

min 300*

min 120*

Electrical connection
Connect the product to a grounded outlet protected by a fuse complying with the values in the “Technical specifications” table. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
· Connection must comply with national regulations.
· Power cable plug must be easily accessible after installation.
· Plug in the product to a grounded socket which is protected by a fuse of 10 Amperes.
· The specified voltage must be equal to your mains voltage.
Do not make connections via extension cables or multi-plugs.
Damaged power cables must be replaced by the authorised service agent.

Adjusting the feet
If the door of the product cannot be closed properly or if the product rocks when you push it slightly, then you need to adjust the feet of the product. Adjust the feet of the product as illustrated in the installation manual supplied with the product.
Steam may escape if the door of the dishwasher is not adjusted properly. Hot steam may cause serious burns and injuries and damage your furniture.

14/EN

5- Preparation

Read “Quick Guide – Adjusting Water Softening System” before this section!

Read “Safety Instructions” section first! The regeneration of the water softening

system can be done in all programmes

Tips for energy saving

during drying step. When regeneration

Following information will help you use the product in an ecological and energy-efficient manner. Wipe away any coarse food remnants on the dishes before putting them in the product.
Manual pre-rinsing of tableware items leads to increased water and energy consumption and is not recommended.
Washing tableware in a household dishwasher usually consumes less energy

occurs, duration, energy and water consumption of the programme increase. For regeneration process; frequency of regeneration cycle, maximum additional duration, water and energy consumption are given in table below depending on Eco 50°C programme water consumption, when the dishwasher is run under standard conditions with 14 dH water supply on its Eco 50°C programme:

Eco 50°C water consumption (l) Regeneration after …. cycles Additional duration (min) Additional water consumption (l) Additional energy consumption (kWh)

and water in the use phase than hand

dishwashing when the household dishwasher

is used according to the manufacturer’s

instructions.

Operate the product after filling it completely.

When selecting a programme, consider

the table of “Programme data and average

consumption values” given on Quick Guide.

Do not put more detergent than suggested 12,3-14,7 5

5 3,0

0,05

on the detergent package.

Water softening system
The product is equipped with a water softening system which reduces the hardness of incoming water. This system softens the supply water to a level that will allow washing the dishes with the required quality.
The mains water hardness must be softened if it is over 7°dH. Otherwise, hardness ions will accumulate on the dishes that are washed and may affect the washing, rinsing and drying performances of the machine.
Adjusting the water softening system
Washing performance will increase when water softening system is adjusted properly.

9,6-12,2 6

5 3,0

0,05

9,0-9,5

7

5 3,0

0,05

8,0-9,0

8

5 3,0

0,05

7,0-7,9

9

5 3,0

0,05

For the water consumption of your dishwasher on Eco 50°C programme, look at the Programme data and average consumption values table given on Quick Guide.

15/EN

Adding salt
Water softening system needs to be regenerated in order for the product to operate with the same performance continuously. Dishwasher salt is used for this purpose.
Use only special softening salts produced particularly for the dishwashers in your machine.
It is recommended to use granule- or powder-formed softening salts in the water softening system. Do not use salts that do not completely dissolve in water such as table salt or rock salt. Otherwise the performance of the system may deteriorate in time.
Salt reservoir will be filled with water when you start the product. For this reason, add salt before operating the machine.
1. Firstly, take the lower basket out to add softening salt.
2. Turn the salt reservoir lid counterclockwise to open it (A).

You can put about 2 kg of softening salt into the salt reservoir.
5. Replace the lid and tighten it when the reservoir is full.
You need to add salt right before starting the machine. Thus, the overflowing salty water will be flushed immediately, preventing the risk of corrosion in machine. In cases where you would not start washing immediately, run your machine empty in the shortest programme.
Since different salt brands in the market have different particle sizes and since the water hardness may vary, dissolution of the salt in water may take a couple of hours. Therefore, Salt Indicator remains on for a while after adding salt into the machine.

3. Add 1 liter of water to salt reservoir of your machine only in initial use.
4. Fill the salt reservoir with salt by using the salt funnel (D). To speed up dissolution rate of salt in water, stir it with a spoon.

Detergent
You can use powder, liquid/gel or tablet detergents in the machine.
Only use detergents produced particularly for use with dishwashers. Note that detergents that contain chlorine and phosphate can be harmful for the environment. Liquid detergents without chlorine may not remove tea and coffee stains from cups.

16/EN

Adding detergent Pay attention to the warnings on the detergent packaging to get better washing and drying results. Contact the manufacturer of the detergent for further questions.
Do not put solvents into the detergent dispenser. There is the risk of explosion!
Put the detergent into the detergent dispenser just before operating the machine as illustrated below. 1. Push the latch to right to open the
detergent dispenser lid (A). (depends on model)

3. Push the lid of the detergent dispenser to close it. A “click” will be heard when the lid is closed.
1

2

3

2. Put suggested amount of powder, liquid/gel or tablet detergent in the reservoir.
Inside the detergent dispenser there are level markings that help you use appropriate amount of powder detergent. When brimful, detergent dispenser will contain 45 cm³ of detergent. Fill detergent up to 15 cm³ or 25 cm³ level marks in the detergent dispenser according to fullness of the machine and/or soiling degree of the dishes. One tablet is enough if you are using detergent tablets.

Use powder or liquid/gel detergent in short programmes without prewash since the solubility of the tablet detergent changes depending on the temperature and time.
17/EN

Tablet detergents
In addition to the conventional tablet detergents, there are also commercially available detergent tablets that show water softening salt and/or rinse aid effect. Some types of these detergents contain specialpurpose components such as glass and stainless steel protectors. These tablets show their effects up to a certain water hardness level (21°dH). Water softening salt and rinse aid must also be used together with the detergent if the water hardness level is above the mentioned level.
The best washing performance in dishwashers is obtained by using detergent, rinse aid and water softening salt individually.

3. After the empty washing cycle, review the user manual and readjust the water hardness level so as to suit the water supply.
4. Make the appropriate rinse aid settings.
Rinse aid
The rinse aid used in dishwashers is a special combination that aims to increase drying efficiency and prevent water or lime stains on the washed items. For this reason, care must be paid to have rinse aid in the rinse aid reservoir and to use rinse aids produced specially for dishwashers only.
1. Open the lid of the rinse aid reservoir with the help of the latch.

Observe the instructions of the detergent manufacturer on the package when using tablet detergents.
Contact the detergent manufacturer if your dishes are wet and/or if you notice limescale spots particularly on your glasses after the washing programme is over when using a tablet detergent.
When you switch to powder detergent from tablet detergent: 1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the highest level and perform an empty run.

2. Fill the reservoir until “MAX” level.

18/EN

3. Slightly press the point (B) of the reservoir lid to close it.
4. If there are stains on tableware items after washing, level must be increased and if there is a blue trace after wiping them by hand, it must be decreased. This is set to position 3 as factory default. The rinse aid adjustment is described under “Adjusting the amount of rinse aid” in the section for operating the machine. Wipe clean any spilled rinse aid outside the reservoir. Rinse aid that spilled accidentally will cause foaming and it will eventually decrease washing performance.
Items not suitable for washing in the dishwasher
· Never wash dishes soiled by cigarette ash, candle remnants, polish, dyestuff, chemicals, etc. in your dishwasher.
· Do not wash silverware and cutlery with wooden or bone stems, glued pieces, or pieces that are not resistant to heat, as well as copper and tinplated containers in the dishwasher.

Decorative prints of chinaware as well as aluminium and silver items may get discoloured or tarnished after washing in the dishwasher just as it happens in handwashing as well. Some delicate glass types and crystals may become dull in time. We strongly recommend you to check if the tableware you are going to purchase is suitable for washing especially in the dishwasher.
Placing the dishes into the dishwasher
Depending on the capacity of your dishwasher, you can use your dishwasher in the optimum way with respect to energy consumption and washing and drying performance only if you place the dishes in an orderly way.
· Wipe away any coarse food remnants (bones, seeds, etc.) on the dishes before placing them in the dishwasher.
· Place thin, narrow pieces in the middle sections of baskets if possible.
· Place the heavily soiled and bigger items in the lower basket and smaller, delicate and light items in the upper basket.
· Place the hollowed dishes such as bowls, glasses and pans upside down in the dishwasher. Thus, accumulation of water in deep hollows is prevented.
To prevent possible injuries, always place the sharp and pointed dishes such as service fork, bread knife, etc. upside down so as their pointed ends will face down or lay them horizontally in the dish basket.
Unload dishes in the lower basket first and then the dishes in the upper basket.

19/EN

Suggestions for loading the dishwasher

Improper Loading Of Dishware

Lower basket
Upper basket Improper Loading Of Dishware

20/EN

Cutlery basket
(depends on model) Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an efficient manner. Since the cutlery basket can be moved (A, B), you can create more space while placing your dishes in the lower basket and free up space for your dishes of different sizes.

Cutlery basket
(depends on model) Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an efficient manner. Since the cutlery basket can be moved (A, B), you can create more space while placing your dishes in the lower basket and free up space for your dishes of different sizes..

21/EN

Collapsible lower basket tines
(depends on model) There are foldable tines (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each tines individually or all of them at once.

To bring the collapsible tines into horizontal position, grab the tines from mid position and push them in the directions of arrows (B). To bring the tines back to vertical position, just lift them up. Collapsible tines will click into the latch again (C).

Bringing the tines to the horizontal position by holding them from the tips may cause them to bend. Therefore, it will be appropriate to bring the tines in the middle to horizontal or vertical position by holding them from their stems and pushing in the direction of arrow.
22/EN

Bringing the tines to the horizontal position by holding them from the tips may cause them to bend. Therefore, it will be appropriate to bring the tines in the middle to horizontal or vertical position by holding them from their stems and pushing in the direction of arrow.

Tray Wash Supports
(depends on model) Use the supports to wash trays in the bottom basket. See the Auxiliary functions section for appropriate programme and function selection.

SoftTouch Accessory
(depends on model) The SoftTouch Accessory found in the lower basket of your machine enables a safe washing for your fragile glasses.

Lower Basket Glass Holder
(depends on model) Lower Basket Glass Holder found in the lower basket of your machine enables a safe washing for your oversized and tall glasses.

23/EN

Lower basket multipurpose / height adjustable service rack
(depends on model) This accessory located at the lower basket of your machine allows you to easily wash pieces such as extra glasses, long ladles and bread knives.

To close the racks: 1. Fold the rack (A).
2. Slide the rack up (B).
3. Put the rack in vertical position (C).
4. Slide the rack down and lock it by the tabs (D).

You may open the racks in the same process in reverse order.
To adjust the height of the racks: 1. Fold the rack (E).
2. Slide the rack up (F).
3. Open the rack at the desired level (G).

You may use the racks as required by moving them to lower or upper position, or close them to create a wider space in your lower basket. Make sure that the impeller does not touch the dishes you placed on the racks.
24/EN

Lower basket bottle wire
(depends on model) The bottle wire is designed for easier washing of long pieces with wide mouths. You may take out the bottle wire from the basket when not in use by pulling it out from both sides (H).

Upper basket multipurpose service rack
(depends on model) This accessory located at the upper basket of your machine allows you to easily wash pieces such as extra long ladles and bread knives.

Upper basket height adjustable rack
(depends on model) Use the lower and upper parts of the height adjustable racks in the upper basket of the machine by sliding them down or up according to the heights of the glasses, cups or etc. (A, B, C).

You can lift up the upper basket multipurpose service rack to remove it if you do not want to use it.

If you want to use the upper basket multipurpose service rack again, you can easily attach it to the side section of your upper basket.

25/EN

Adjusting the height of the upper basket (depends on model) The upper basket height adjustment mechanism has been designed for you to create large spaces in the lower or upper sections of your machine depending on your needs by adjusting the height in the upper or lower direction while your basket is empty or loaded.
Thanks to this mechanism, you can use your basket in three different positions, namely lower, middle and upper positions (1, 2, 3). 1. To raise your basket, hold the upper
basket wires with both hands while the basket is in the lowermost position and pull them up (A). 2. You will hear a “Click” from the right and left mechanisms, indicating that the basket has reached the next level. Release the basket. Repeat the process if the height is not sufficient.
1
2
3

To lower the basket, while it is in the uppermost position; 1. Hold the upper basket wires with both
hands, slightly lift up the basket and simultaneously push and release the latches shown in the figure (B). 2. Lower the basket from its current position to the lower one. 3. Release the basket after it has reached one level down. Repeat the process if the height is not sufficient.
The movement mechanism may not function properly if the upper basket is overloaded or if the weight distribution is not balanced. In heavier conditions, there is the risk of falling one level down. Make sure that the adjustment mechanism has the same positions on the right and left sides of the upper basket.

26/EN

Adjusting the height of the upper basket
(depends on model) Upper basket height adjustment mechanism is designed so that you can create wide spaces on the upper or lower compartment of the machine by adjusting the basket upwards or downwards either while it is empty or full. Thanks to this mechanism, you may use your basket in three different positions, namely lower, center or upper positions. To lower the basket, perform the following while the basket is at uppermost position; 1. Hold the wires of the upper basket and
raise the handle of the mechanism upwards as shown in the figure (A).
2. Lower the basket to the next lower position.
3. Release the basket when it catches on to the next lower position.
Repeat the same operation if the height is not adequate.

Repeat the same operation if the height is not adequate.
1
2 3
The movement mechanism may not work properly when the upper basket is overloaded or when the load is unbalanced. And it may fall to the next lower position in heavier conditions. Ensure that the adjustment mechanisms on the right and left of the upper basket are aligned.

1 2 3

1. To raise the basket, hold the wires of the basket and pull the basket upwards with both hands while the basket is at the lowermost position (B)
2. Release the basket when it catches on to the next upper position with a “Click” that may be heard from the right and left mechanisms.

27/EN

Upper basket multi-function service rack
(depends on model) Thanks to the upper basket multi-function service rack on the upper basket of your appliance, you may load and wash long service-ware and kitchen-ware easily. Also, the wineglass securing compartments available on the front side of this accessory allows easier placing of the stemware with proper sizes on the upper basket.

Tray Washing Support (depends on model) You may use the tray washing supports if you want to wash a tray on your lower basket. Refer to the Additional Functions section to select the proper program and function. You may fold this part when it is not used to facilitate the placement of your dishes.

You may remove the upper basket multifunction service rack by lifting it upwards when you do not want to use it.

1

2

You may reinstall the upper basket multifunction service rack on the side of your upper basket easily to use it again.

You may also remove the part when required as shown in figures 1 and 2.
The tray washing supports shall be removed as shown in figures 1 and 2 for performance inspection tests that shall be performed as per the standards.

28/EN

Collapsible upper basket wires
(depends on model) You can use collapsible wires when you need a larger space for your dishes in the upper basket of your machine. To bring the collapsible wires into horizontal position, grab the wire from the middle position and push them in the direction of arrow in the figure. Place your larger dishes into the area created. To bring the wires back to vertical position, just lift them up.

Height setting with empty basket
(depends on model) In this model, the height setting of the upper basket may be changed using the wheels which are mounted at two different heights. Release the latches on both the right and left tracks of the upper basket by pushing them outwards. Pull the basket out completely. Place the basket back into the tracks at the desired height. Push the latches back into the correct position.

Bringing the wires to the horizontal position by holding them from the tips may cause them to bend. Therefore, hold the wires from their stems while bringing them to the horizontal or vertical positions.

29/EN

Ceiling cutlery basket
(depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket.

When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc. on the tray. When the side trays lean on two side walls, the handle can be pulled to allow the central tray to rise and the system to be locked.

Ceiling cutlery basket

(depends on model)

Ceiling cutlery basket is designed to wash

your cutlery items such as forks, spoons

and etc. by placing them between the bars

1

on the basket.

In models with partial movement feature, pushing the bar (1) on the handle enables the central tray of the basket to get to the lower position and the system gets unlocked. Thus right and left side trays can be used as moving parts. The free space enabled by the side trays allows long parts to be loaded in the upper basket.

30/EN

6-Operating the product

Read “Safety Instructions” section first!
Read “Quick Quide” before this section.
Keys
On / Off key It is used to turn on or off the machine. Press On / Off Key to switch ON. Machine will turn on with economy programme in On mode and the number of the economy programme will appear on the programme indicator. In Off position, indicators on the display will turn off. Start / Pause / Cancel key It is used to start, pause or cancel a selected programme or function. Programme Selection keys They are used to select the washing programme you determined from the table of “Programme data and average consumption values”. Delayed Start key It should be pressed to make the time delay settings.
Preparing the machine
1. Open the door of the dishwasher.
2. Place the dishes in accordance with the instructions in the user manual.
3. Make sure that the upper and lower impellers rotate freely.
4. Put adequate amount of detergent into the detergent dispenser.
5. Check if the Salt and Rinse Aid indicators light and add salt and/or rinse aid if needed.
6. Close the door of the dishwasher.
Programme selection
1. Press the On/Off button to turn on your machine.

2. Refer to the table of “Programme data and average consumption values” to determine a washing programme suitable for your dishes.
3. Press Programme Selection keys until the number of the programme you selected appears on the Programme indicator. Use P+ to switch to the next programme, and P- to switch to the previous one.
Auxiliary functions
Washing programmes of your dishwasher are designed to obtain the best cleaning effect, considering the type of the soil, soiling degree and properties of the dishes to be washed. Auxiliary functions are provided in order to enable you to save time, water and energy and to perform a more comfortable washing with conditions specific to you.
Auxiliary functions may cause changes in the programme duration.
Some auxiliary functions cannot be used together.
Auxiliary functions are not suitable for all washing programmes. Indicator of the auxiliary function that is not compatible with the programme will not be active.
To add auxiliary function to the programme: 1. Select the desired washing programme
by pressing the programme selection key.
2. In the selected washing programme, if auxiliary function is selected, its symbol will be displayed on the screen. If the function button is pressed again the symbol will disappear and selection is cancelled.
3. Selection will be cancelled when you press the function key again.

31/EN

Half Load function (Depends on model) It is used to operate the machine without loading it completely. 1. Load your dishes in the machine as
you like.
2. Turn the machine on with On/Off key.
3. Select the desired programme and press the Half Load key.
While the function is enabled, the Half Load indicator will come on in the function selection indicator and on the display. 4. Start the programme by pressing Start
/ Pause / Cancel key.
With the Half Load function you can save both water and power while using the lower and upper baskets of the machine. Extra Drying Function (Depends on model) It provides superior drying performance. Fast+ Function (Depends on model) It shortens the time of the washing cycle selected and decreases water consumption by enabling washing under higher pressure. Tablet detergent function (depends on model) Allows to obtain a better drying performance from the multi-purpose detergents called as all in one detergents such as 2in1, 3in1, 4in1, 5in1 and etc., depending on the hardness level of the tap water.
If you have used the Tablet features during the last washing programme you used, Tablet function will remain active in the next washing programme you will select.
Tablet Detergent function may cause change in the programme duration.

Super Rinse Function (Depends on model) Depending on the type of the detergent used, if a detergent dissolving issue is encountered it will remove the resulting stains from the dishes and enables the optimum rinsing performance.
AquaIntense Function (depends on model) AquaIntense impeller located under the lower impeller helps washing your heavily soiled dishes placed
in the right side of the lower basket. It will give better results to place the most soiled dish to the right front side.
Do not try to remove the AquaIntense impeller!
TurboWash Function (depends on the model) Select Intensive 70°C programme and press function key to run this function.
AquaActive Function (Depends on model) This function operates the lower impeller with a higher pressure and higher speed to enable a better washing for dishes such as pans and trays with stubborn, dried soiling.
IonGuard function (depends on the model) IonGuard function is enabled at regular intervals and prevents the formation of bad odours due to putrefaction. If this function is selected, it will be activated while the product is turned off and the IonGuard indicator on the panel will flash. A ventilation noise can be heard, this is normal. Until the function selection is disabled, system is automatically activated intermittently.

32/EN

Auto Tablet Feature (Depends on model) Auto Tablet is a feature which detects the use of combined tablet detergents automatically.
Drying performance of these type of detergents is improved by adjusting temperature and duration accordingly. Owing to this feature, there is no need to press any button in case of a tablet detergent use.
Feature can be activated if automatic detection is desired. To activate / to deactivate: 1. After turning on the machine,
press Time Delay and P+ keys simultaneously. Keep them pressed until the countdown 3, 2, 1 is completed on the display.
2. Press P+ key to activate the a: option. Automatic detergent detection feature is disabled at “a:0” option and enabled at “a:1” option. Set the desired option by pressing the Time Delay key.
3. Turn off the machine with On/Off key to save the changes.
Floor illumination Warning to show that machine is in washing phase (depends on the model) Your machine reflects a light to the floor during the washing process. This light turns off after the washing process is complete.
Floor illumination is activated automatically when the washing programme starts and remains lit until the end of the programme.
Floor illumination cannot be cancelled by the user.

Interior Lighting (depends on the model) Some models have interior lighting to illuminate the interior when the door is opened. 1. After switching on your machine,
press Time Delay and P / P+ keys simultaneously. Keep them pressed until the countdown 3, 2, 1 is completed on the display.
2. Press P / P+ key to move to the L: position on the display. Interior lighting is off in “L:0” position and on in “L:1” position. Select the position you want with the Time Delay key.
3. Switch off the machine with the On/Off key to save the changes.
SelfDry (Depends on the Model) Thanks to the “SelfDry” feature on your machine, the drying effectiveness of your machine is improved and power is saved. There are two options, namely “OFF” and “ON”. You may use sub-menu settings to change “SelfDry” settings. When you activate this function, the door of your machine is opened automatically at the end of the washing cycle.
SelfDry feature opens the door at the end of the washing cycle thanks to the “door opening shafts”. This process takes about 2 minutes. Do not force to close the door if the power is interrupted while the shafts are moving out. Operation shall be completed and shafts shall be retracted when the power is restored.
SelfDry function may cause changes to the cycle time.

33/EN

Changing SelfDry Settings 1. Press the Delay and P/P+ key
simultaneously after turning on your machine. Keep pressing until the countdown on the screen displayed as 3, 2, 1 is completed.
2. Press P / P+ key, and move to the o: position on the screen. “o: 0” position indicates that the SelfDry feature is off “o: 1” position indicates that it is on. Select the desired position with the delay key.
3. Turn off your machine with the On/Off key to save the setting.
EverClean Filter (depends on the model) With this function, your micro filter will be cleaned by a special system at the end of washing cycle and it is made ready for use for the next usage of the machine. This cleaning process increases the cleaning period of the micro filter from 2 weeks to 3 months and thus boosts the washing performance. Employing this function in every washing cycle is recommended in order to get the most out of it.
Programming the washing time
Time Delay If an economical electricity tariff is applied in your region, you can use the Time Delay function to wash your dishes during appropriate hours. You can delay the start of the selected programme until 24 hours. Time Delay cannot be set after the programme starts. 1. Press the Time Delay function key after
selecting the washing programme and other auxiliary functions.
2. Once you press the Time Delay key, Display Information Line will show “0:30” and Time Delay indicator will start flashing.

3. Set the desired time by pressing the Time Delay key. Time will increase with increments of 30 minutes up to 6 hours and after that in 1 hour increments up to 24 hours every time you press the key.
4. Press Start / Pause / Cancel key to start countdown for the Time Delay. Time Delay indicator and Start / Pause indicator will light continuously until the end of the period. Time Delay is displayed on the Display Information Line. Selected programme will start as soon as the countdown is over.
Changing the settings while Time Delay function is enabled While the Time Delay function is activated, you cannot make changes in the washing programme, auxiliary functions or the duration of delay time.
Programme and auxiliary functions cannot be set/changed after the programme has started.
To cancel the Time Delay function 1. Press and hold Start / Pause / Cancel
key for 3 seconds.
2. When the Start / Pause / Cancel key is pressed and hold, “3”, “2”, “1” appear on the Display Information Line. Time Delay indicator will turn off at the end of the cancellation process and delaying process is cancelled.
You can select and start a new programme following the cancellation of Time Delay function.
Time Delay function can not be set after the programme starts.
Starting the programme
To start your machine after selecting the programme and auxiliary functions, press Start / Pause / Cancel key.

34/EN

Once the programme starts a tune is played and the estimated time remained to the end of the programme will appear on the Display Information Line. Start / Pause / Cancel indicator starts lighting continuously.
Your machine performs water softening depending on the hardness level of the supply water. Remaining time displayed towards the end in some programmes can be different from the time indicated at the beginning due to this process. The total time can also change while the programme is running depending on the ambient temperature where your machine is installed, temperature of the supply water and amount of the dishes.
Pay attention not to open the door of the machine when it is running. Stop the machine by pressing Start / Pause / Cancel key if you have to open the door. Then, open the door of the machine. There may be a rush of steam when you open the door of your machine; be careful. Close the door of your machine and press Start/Pause/ Cancel key again. Programme will resume running.
The machine will remain silent in pause mode for some time in order to remove the water in the machine and on the dishes completely and to have the water softener cleaned, and then it will resume running in drying mode.
Child (Key) Lock
You may prevent other people from interrupting and changing the programme cycle and time delay while the machine is running. To activate the Child Lock:

Pres Child (Key) Lock keys
simultaneously and hold for 3 seconds.

2. “3”, “2”, “1” is displayed on Display Information Line and key lock is activated.
Child Lock prevents the selected programme or functions from being changed and disables the Start / Pause / Cancel key.
Child Lock does not lock the door of the machine.
If you turn your machine off by using On/Off key at the end of the programme, the Child Lock will be deactivated automatically.
For energy saving, the product is automatically turned off following the completion of the programme or if the programme is not started.
To deactivate the Child Lock: 1. Pres Child (Key) Lock keys
simultaneously and hold for 3 seconds.
2. “3”, “2”, “1” is displayed on Display Information Line and key lock is cancelled.
Cancelling the programme
1. Press Start/Pause/Cancel key for 3 seconds to cancel the programme.
2. Release the key when the Start / Pause indicator starts flashing. For a couple of minutes the machine will fulfill the necessary operations required to cancel the programme.
There might be residues of detergent or rinse aid left in the machine and / or on the pieces being washed depending on the step the programme you have cancelled was in.

35/EN

Salt indicator ( )
Please check the salt indicator on the display to see whether there is adequate amount of softening salt in the dishwasher or not. You need to refill the salt reservoir with salt whenever salt warning indicator appears on the display of your machine.
Adjusting the water hardness level is explained in Water Softening System section.
Rinse Aid indicator ( )
Please check the rinse aid indicator on the display to see whether there is adequate amount of rinse aid in the dishwasher or not. You need to refill the rinse aid reservoir with rinse aid whenever rinse aid warning indicator appears on the display of your machine.

End of programme
End of Programme indicator will light up once the washing programme is over.

Press the On/Off button to turn off your
machine.
2. Close the tap.
3. Unplug the machine from the socket.
For energy saving, the product is automatically turned off following the completion of the programme or if the programme is not started.
Leave your dishes in the machine for about 15 minutes to cool down after they are washed. Your dishes will dry in a shorter time if you leave the door of your machine ajar during this period. This process will increase the drying effectiveness of your machine.

Adjusting the amount of rinse aid
1. After turning on the machine, press Time Delay and P+/P keys simultaneously. Keep them pressed until the countdown 3, 2, 1 is completed on the display.
2. Press P+/P to move to position P on the display.

Water cut-off warning
If mains water is cut or water inlet tap is turned off the machine cannot take water in and E:02 icon will flash on the programme indicator. As long as the problem continues, washing programme is paused and the water inlet is checked regularly by the machine; when the water is restored E:02

3. Set to the appropriate level with the Time icon will disappear after a while and the

Delay key.

washing programme resumes.

4. Press On / Off key to save the setting.
No rinse aid dispensed in P:0 wash position.
1 dose of rinse aid is dispensed in P:1 position. 2 doses of rinse aid are dispensed in P:2 position. 3 doses of rinse aid are dispensed in P:3 position. 4 doses of rinse aid are dispensed in P:4 position.

Overflowing warning
If the machine intakes too much water or there is leakage at any of the components then the machine will detect this and E:01 icon will flash on the Programme indicator. As long as the overflowing continues safety algorithm will be active and try to discharge the water. If overflowing stops and safety is assured, E:01 icon will disappear. If E:01 does not disappear, there is a permanent fault. In this case the authorised service should be contacted.

36/EN

InnerClean (depends on model) This programme is recommended to be operated on each 1-2 months for machine cleaning and necessary hygiene. The programme should be operated while the machine is empty. In order to achieve an efficient result, it is recommended to use together with special machine cleaning agents.
Do not use this programme to clean dishes. As it operates in high temperatures, it is harmful for the dishes.
37/EN

7- Maintenance and cleaning
Read “Safety Instructions” section first!
Unplug the product and turn off the tap before attempting any cleaning procedures.
Do not use abrasive substances for cleaning.
Clean the filter and impellers at least once a week in order for the machine to operate efficiently.
Service life of the product extends and frequently faced problems decrease if it is cleaned at regular intervals.

Cleaning the filters
Clean the filters at least once a week in order for the machine operates efficiently. Check if food residues are left on the filters. If there are food residues on filters, take them out and clean well under running water. 1. Turn the micro filter (1) and coarse filter
(2) assembly counter clockwise and pull it out from its seating.(depends on model)

Cleaning the outer surface of the product

NOTICE Clean the outer surface and door gaskets of the product gently with a mild cleaning material and damp cloth. Wipe the “control panel” only with a damp cloth.

Cleaning the interior of the machine

· Clean the interior of the machine by

operating the machine in the programme 2. Pull out the metal/plastic filter (3) from

running at the highest possible

the seating.

temperature with detergent or special

machine cleaning agents monthly. This

operation will help removal of leftovers

and limescale from the interior of the

machine.

· If water has remained in the machine, drain the water by performing the procedures under the topic “Cancelling a programme”. If the water cannot be discharged, remove the filters as specified in the “Cleaning the filters” section and check if there are any leftover deposits that have accumulated at the bottom of the machine, blocking the water path. Clean if necessary.

3. Press the two pawls on the coarse filter inwards and separate the coarse filter from the assembly.

38/EN

4. Clean all three filters under tap water by means of a brush.
5. Place the metal/plastic filter.
6. Place the coarse filter into the micro filter. Make sure that it is properly seated. Turn the coarse filter clockwise until a “click” sound is heard.
Do not use the dishwasher without filter.
Incorrect placement of the filters will reduce washing efficiency.
Micro Filter Cleaning Mechanism (depends on model)
Filter cleanliness is increased by 80% with the micro filter cleaning system available on your machine.
If your machine has auto filter cleaning feature do not remove the micro filter
cleaning mechanism (4) for cleaning.

Cleaning the hose filter
Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose. Check the filter and the hose regularly and clean them if necessary. 1. Turn off the tap and remove the hose.
2. After taking out the filter, clean it under running tap water.
3. Place the cleaned filter back to its seat in the hose.
4. Install the hose to tap.
(depends on model)

39/EN

Cleaning the impellers Clean the impellers at least once a week in order for the machine operates efficiently.
Lower impeller Check if the holes on the lower impeller (1) are clogged. If they are clogged, remove and clean the impeller. You can pull the lower impeller up to remove it. (depends on model)

Do not try to rotate the impeller by holding its ends. Trying to rotate the end sections may cause the gear system within the impeller to break.
Upper impeller
Check if the holes on the upper impeller (1) are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to remove the upper impeller. Make sure that the nut is tightened well when installing the upper impeller.

Check if the holes on the lower impeller assembly are clogged. If they are clogged, remove and clean the impeller assembly. (depends on model)
C
To remove and clean the lower impeller assembly together, hold by one hand from the (C) points shown in the figure and pull up to remove. After cleaning, follow these steps in reverse order to reinstall the impeller assembly.
40/EN

8- Troubleshooting
Machine does not start. · Power cable is unplugged. >>> Check if the power cable is plugged in. · Fuse is blown. >>> Check the fuses in your house. · Water is cut. >>> Make sure that the water inlet tap is open. · Door of the machine is open. >>> Make sure that you have closed the door of the
machine. · On / Off button is not pressed. >>> Make sure that you have turned on the machine by
pressing the On / Off button.
Dishes are not washed clean · Dishes are not placed orderly in the machine.

Load the dishes as described in the
user manual. · Selected programme is unsuitable. >>> Select a programme with a higher temperature
and cycle time. · Impellers are stuck. >>> Prior to starting the programme, turn the lower and upper
impellers by hand to make sure that they rotate freely. · Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged
with food remnants such as lemon pips. Clean the impellers regularly as illustrated in section “Cleaning and Care”. · Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section “Cleaning and Care”. · Filters are installed incorrectly. >>> Check the filter system and make sure that it is installed correctly. · Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity. · Detergent is stored under unsuitable conditions. >>> If you are using powder detergent, do not store the detergent package in humid places. Keep it in a closed container if possible. For ease-of-storing, we recommend you to use tablet detergents. · Detergent is not sufficient. >>> If you are using powder detergent, adjust the amount of detergent according to the soiling degree of your dishes and/or programme definitions. We recommend you to use tablet detergents for optimum results. · Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. · Detergent dispenser lid is left open. >>> Make sure that the detergent dispenser lid is closed tightly after adding detergent.
Dishes are not dry at the end of cycle · Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no
water will accumulate in them.
41/EN

· Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine.
· Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed. Slightly open the door and wait for evacuation of the steam inside for a while. Unload the dishes after the pieces cool down to a touchable level. Start unloading process from the lower basket. Thus, dropping of water remained on a piece at upper basket onto the pieces at lower basket is prevented.
· Selected programme is unsuitable. >>> Since rinsing temperature is low at programmes with short duration, drying performance will also be low. Select programmes with longer duration for a higher drying performance.
· Surface quality of the kitchen utensils is deteriorated. >>> Desired washing performance can not be obtained on kitchen utensils with deteriorated surfaces and it is not suitable to use such utensils in terms of hygiene as well. Also, water can not flow easily on deteriorated surfaces. It is not recommended to wash such kitchen utensils in dishwasher.
It is normal that drying complaints can be experienced with Teflon kitchen utensils. It is associated with the structure of Teflon. Since the surface tensions of Teflon and water are different, water droplets will remain as beads on the Teflon surface.
Tea, coffee or lipstick stains remain on dishes. · Selected programme is unsuitable. >>> Select a programme with a higher temperature
and cycle time.
· Surface quality of the kitchen utensils is deteriorated. >>> Tea and coffee stains or other dye spots may not be cleaned in dishwasher when they have penetrated in deteriorated surfaces. Desired washing performance can not be obtained on kitchen utensils with deteriorated surfaces and it is not suitable to use such utensils in terms of hygiene as well. It is not recommended to wash such kitchen utensils in dishwasher.
· Detergent is stored under unsuitable conditions. >>> If you are using powder detergent, do not store the detergent package in humid places. Keep it in a closed container if possible. For ease-of-storing, we recommend you to use tablet detergents.
Lime traces remain on dishes and glassware gains a misty appearance · Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine.
· Water hardness setting is low or salt level is insufficient >>> Measure the hardness of the supply water appropriately and check the water hardness setting.
· Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme.
42/EN

There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes.
· Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section “Cleaning and Care”.
· Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going to start the machine right after you have put the dishes into it, remove the remnants on the dishes and run the Prewash programme without detergent every 2 days. In such cases, do not close the door of the machine completely in order to avoid odour build up in machine. You can also use commercially available odour removers or machine cleaners.
Rust, discoloration or surface deterioration occurs on dishes · Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal surfaces.
Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme.
· Salty food remnants have remained on dishes for a long time. >>> If cutlery soiled with such foods will be kept waiting in machine, dirt must be removed by prewash or dishes must be washed without being kept waiting.
· Electric installation is not grounded. >>>Check if your machine is connected to the actual grounding line. Otherwise, the static electric created in the product causes arcs on the surfaces of metal items creating pores, removing the protective cover on the surface and causing discoloration.
· Intensive cleansers such as bleaches are used. >>> Protective cover on metal surfaces gets damaged and looses its efficiency in time when it gets in contact with cleansers such as bleach. Do not wash your dishes with bleach.
· Metal items particularly knives are used for purposes other then their intended uses. >>> Protective cover on the edges of knives may get damaged when they are used for purposes such as opening cans. Do not use metal kitchen utensils out of their intended uses.
· Cutlery are made of low quality stainless steel. >>> Corrosion on such items is inevitable; they should not be washed in dishwashers.
· Kitchen utensils that are already corroded are washed in dishwasher. >>> Rust on a corroded item can migrate to other stainless steel surfaces and cause corrosion on those surfaces as well. Such items should not be washed in dishwashers.
Detergent remains in detergent dispenser. · Detergent dispenser was damp when adding detergent. >>> Make sure that the
detergent dispenser is dried well prior to filling it with detergent.
· Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
43/EN

· Opening of the detergent dispenser lid is prevented during washing. >>> Place the dishes in a way that will not prevent the detergent dispenser lid from opening and the water going into the machine from impellers.
· Detergent is stored under unsuitable conditions. >>> If you are using powder detergent, do not store the detergent package in humid places. Keep it in a closed container if possible. For ease-of-storing, we recommend you to use tablet detergents.
· Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged with food remnants such as lemon pips. Clean the impellers regularly as illustrated in section “Cleaning and Care”.
Decorations and ornaments on kitchen utensils are being erased. Decorated glasses and decorated lustre porcelains are not suitable for washing in the dishwasher. Manufacturers of some glassware and porcelain tableware items do not recommend washing such kitchen utensils in the dishwashers either.
Dishes are scratched. Kitchen utensils that contains or are made of aluminium should not be washed in dishwasher.
· Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while adding salt. Spilled salt can cause scratches. Make sure that the salt reservoir lid is tightly closed after finishing the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme.
· Water hardness setting is low or salt level is insufficient >>> Measure the hardness of the supply water appropriately and check the water hardness setting.
· Dishes are not placed orderly in the machine. >>> When placing the glasses and other glassware into the basket lean them not against other dishes but the edges or racks of the basket or the glass support tines. Striking of the glasses to each other or to other dishes due to the impact of water during washing can cause breaks, or scratches on their surfaces.
A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. · Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid
when adding rinse aid. · Corrosion has occurred on glass due to soft water.

Measure the hardness of the
supply water appropriately and check the water hardness setting. If your supply water is soft (<5 dH), do not use salt. Choose programmes that wash in higher temperatures (e.g. 60-65°C). You can also use glass protective detergents that are commercially available.
44/EN

Foam forms in the machine. · Dishes are washed with hand-wash detergent by hand but not rinsed before placing
them into the machine. >>> Hand-wash detergents do not contain antifoam. There is no need to hand-wash the dishes before placing them into the machine. Removing the coarse soil on the dishes under tap water, with a tissue paper or fork will be sufficient. · Rinse aid has spilled into the machine when adding rinse aid. >>> Take care that rinse aid is not spilled in the machine when you are filling it. Clean any spilled rinse ait with the help of a tissue paper/towel. · Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse aid reservoir is closed after adding rinse aid. Kitchen utensils are broken. · Dishes are not placed orderly in the machine. >>> Load the dishes as described in the user manual. · Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity. Water remains in the dishwasher at the end of the programme. · Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section “Cleaning and Care”. · Discharge hose is clogged/blocked. >>> Check the discharge hose. If necessary, remove the discharge hose, clear the blockage and insert is as illustrated in the user manual. If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorised Service Agent. Never try to repair a nonfunctional product yourself.
45/EN

Service
Nationwide service in Sweden Visit www.cylinda.se Call 0771-25 25 00
Declare
Model code Serial number Purchase date Problem description Name and address Phone number
Contact us
www.cylinda.se
46/EN

Elektroskandia Sverige AB, Cylinda, 191 83 Sollentua