SNAPYDOCK 1068863 Wireless Car Charger User Manual

SNAPYDOCK 1068863 Wireless Car Charger

PRODUCT OVERVIEW

1. Automatic Retractable Clip
2. Intelligent Sensing Area
3. Bottom Bracket
4. Touch Sensor
5. Air Vent Mount
6. LED Status Indicator
7. Micro USB Charging Port

PRODUCT FEATURES

1. The 10W wireless charger complies with the Qi international standard, supporting fast charging.
2. Utilizes magnetic induction for short-distance radio transmission, making it compatible with all devices that adhere to the Qi standard.
3. When using a 5V output adapter, the wireless charger supports a 5W load. When using a QC 3.0 standard output adapter, it supports a 10W load.
4. Overvoltage Protection: When charging with the QC 3.0 adapter, if the input voltage rises to 9V, the overvoltage protection activates at 9.5V.
5. Overcurrent Protection: During charging with the QC 3.0 adapter, the current is adjusted by feedback from the connected device. If the current exceeds 2A, overcurrent protection will activate.
6. Foreign Object Detection: If a metal object is detected on the induction coil during charging, the charger will stop to prevent damage by recognizing the abnormal change in magnetic flux.
7. Overtemperature Protection: The wireless charger monitors the temperature of the connected device during charging. If it detects an unsafe temperature, it will reduce the current or shut off to prevent overheating.

USER INSTRUCTIONS

1. Connect the vehicle’s wireless charging device to the appropriate data cable before use.
2. Plug the USB end of the cable into the car’s charging interface (e.g., cigarette lighter adapter or in-car USB charging port).
3. Attach the device securely to the air vent using the clip. Alternatively, it can be placed on a different surface.
4. Once powered by a 5V-9V DC source, the blue indicator light will turn on. When an object approaches within 5cm-20cm, the arms will automatically open. Place your phone into the cradle, and the arms will close, securing the phone. Wireless charging will begin automatically, indicated by a green light (for phones with wireless charging capability). To remove the phone, touch the sensor on the back of the device; the arms will open, allowing you to take the phone out.
5. The device is equipped with overvoltage, overtemperature, magnetic field, and short-circuit protection. If any abnormality occurs, the device will automatically stop functioning to ensure safety.
6. When plugged into power, the indicator light will remain on continuously.

INSTRUCTIONS FOR RECYCLING AND DISPOSAL
This label means that the product cannot be disposed of as other household waste throughout the EU. To prevent potential damage to the environment or human health from uncontrolled waste disposal. Recycle responsibly to promote the sustainable use of material resources. If you want to return a used device, use the drop-off and collection system, or contact the retailer from whom you bought the product. The retailer can accept the product for environmentally safe recycling.

A declaration by the manufacturer that the product complies with the requirements of the applicable EU Directives.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>