TP-Link KP125M Kasa Matter Instruction Manual
- June 1, 2024
- tp-link
Table of Contents
TP-Link KP125M Kasa Matter
Product Information
Specifications
- Model: 7106510364 REV1.2.0
- Platform Compatibility: Matter-enabled devices
- Manufacturer: TP-Link
- Contact Information: support.usa@tp-link.com | +1 866 225 8139 (Toll-Free)
Product Usage Instructions
Before You Start
Make sure you have the following ready:
- A TP-Link Matter-enabled device.
- A smartphone with Bluetooth capabilities.
- A stable Wi-Fi network for device connectivity.
How to Set Up
- Turn on Bluetooth on your smartphone.
- Download and open any Matter-enabled smart home app on your phone.
- Scan the Matter QR code provided with your device or enter the numeric code manually.
- Ensure your device and smartphone are connected to the same Wi-Fi network.
- Follow the step-by-step instructions within the app to complete the setup process.
Failed to Set Up?
If you encounter any issues during setup, ensure that:
- Your device is powered on and within range of your Wi-Fi network.
- Your smartphone’s Bluetooth is functioning properly.
- You have entered the correct numeric code or scanned the QR code accurately.
- Contact TP-Link Technical Support for further assistance if needed.
Frequently Asked Questions (FAQ)
For more information and troubleshooting tips, please visit the official
TP-Link FAQ page at: TP-Link FAQPage
Visit
https://www.tp-link.com/support/faq/3520/
-
Setup Videos
Matter setup for Amazon Alexa, Apple Home, Google Home, and SmartThings. -
Troubleshooting & Help
You can set up your TP-Link Matter-enabled device with any Matter-enabled app, not just TP-Link Kasa Smart. Follow the instructions below to configure your Matter products.
Before You Start
- Get a Matter Controller: This is needed to connect and manage Matter devices on your home network. For instance, Apple TV and HomePod are examples of Matter controllers.
- Reset Your Device: It’s important to start with a fresh device. Here’s how:
- For most devices: Press and hold the ‘Reset’ button for 10 seconds.
- For smart bulbs: Turn the light switch off and on five times, with a 1-second pause between each action.
- Access Matter Setup Mode: This mode turns off 15 minutes after the device is powered up. To return to setup, simply turn your device off and then back on.
- Locate Your Matter Code: Look for a QR code or a numeric code on your device or in its packaging. Snap a picture of it for future reference.
How to Set Up
*Setup processes may vary between different apps.
- Turn on Bluetooth on your phone.
- Open the smart home app, and either scan the Matter QR code or input the given numeric code.
- Connect your device to the same network as your controller.
- Follow the instructions in the app to complete setup.
Failed to Set Up
- Restart: Try turning off and then turning back on your device, controller, or phone.
- Check IPv6: Ensure that IPv6 is activated on your router. Visit our FAQ for step-by-step guidance: https://www.tp-link.com/support/faq/1525/
- Regarding the Matter Code: The original Matter code can only be used for setup in one app (you can reuse it after a device reset). If you wish to set it up in multiple apps, generate a new code using the first app for all subsequent ones.
The development of Matter is ongoing, with progress varying across platforms. Device performance and bugs can occur unrelated to the device itself. TP-Link, along with other CSA members, is committed to enhancing user experiences and service quality.
Our expert Technical Support team is ready to assist you. Please don’t hesitate to reach out with any questions. Your feedback is vital to us!
EMAIL
support.usa@tp-link.com
CALL
+1 866 225 8139 (Toll Free)
CHAT
https://livechat.tp-link.com/us/smart/
References
- Link: Simple, secure one-click payments
- TP-Link
- How to set up an IPv6 Internet connection on the TP-Link Wi-Fi Routers
- General Questions about Matter-Enabled Devices | TP-Link
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>