SHIFTCAM PG0001 ProGrip Starter Kit User Guide

: June 5, 2024
: SHIFTCAM

Table of Contents

SHIFTCAM PG0001 ProGrip Starter Kit
ProGrip Components
Safety Instructions
Charging ProGrip
ShiftCam ProGrip
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SHIFTCAM PG0001 ProGrip Starter Kit

ProGrip Components

Shutt er Butt on
Universal Clamp Wireless
Charging Plate
Bluetooth Butt on
Charging Butt on
LED Panel
Cold Shoe Slot
Hand Strap Loop
¼’’ Tripod Screw
USB-C Port

Shift Cam Warranty
We oﬀ er a 2-Year Warranty that covers your products from any manufacturing ﬂ aws or defects. Warranty does not cover damages from accidents or misuse. 2 Simple Steps to Get Your ProGrip Covered:

Scan the QR code and complete the warranty registrati on process.
In case of service required, please reach out to cs@shift cam.com and send this warranty card along with your ProGrip back to us. We will get it ﬁ xed.

Safety Instructions

Keep away from moisture and liquids. If ProGrip has been exposed
to liquids, dry immediately with dry cloth or ti ssue
Do not open, remove, crush, puncture, or short-circuit ProGrip
Do not use if visible defects are observed on ProGrip.
Do notatt empt to service or disassemble Using ProGrip for long periods of ti me will result in producti on of heat radiati ng from the device. It is a normal conditi on.
If you believe your ProGrip may be overly heated please turn oﬀ the device immediately

Battery and Power
Battery Speciﬁcations

Batt ery: 18650 Lithium I on Batt ery Cell x2 pcs
Capacity: 3.65V / 6400mAh / 23.36Wh Total power output: 20W Max
USB-C In: PD 18W Max, DC9V/2A, 5V/3A
USB-C Out: PD 20W Max,
DC12V/1.5A, 9V/2.22A, 5V/3A (Max) Wireless Charging: 5W

Charging ProGrip

Connect the USB-C cable included in the packaging to a power adapter plugged into a power outlet
Insert the USB-C cable to the USB-C port on the bott om of ProGrip

Wireless Charging
Turn on wireless charging functi on:

Press the Charging Butt on
A green LED light indicates the wireless charging functi on has been acti vated and entered into auto-detecti on mode
Att ach your smartphone onto ProGrip securely, while aligning your smartphone centered to the wireless charging plate
ProGrip will auto-detect your smartphone once it is in place and begin charging. If fast charge mode is on, a red LED light will turn on simultaneously
Please double check your smartphone’s batt ery indicator to ensure it is acti vely charging

USB-C Charging

Connect your accessory or smartphone to ProGrip using the USB-C cable
Plug in cable to USB-C port on ProGrip on one end, and connect the other end to your accessory or smartphone’s power port
White LED lights will turn on, indicati ng that charging is acti ve Please double check your smartphone or accessory’s batt ery indicatory to ensure it is acti vely charging
- Slide and att ach accessories of your choice.
- Cold Shoe Mount Adapter If you want to adjust the angle the accessories face, add-on the rotatable Cold Shoe Mount Adapter.

LED Panel
LED feedback indicati on

Charging ProGrip
Connect to power source through USB-C cable to charge.

Attaching ProGrip to Phone
Align your smartphone to the center of the clamp, push down the lower arm with your smartphone to open up clamp. Push your smartphone into the top arm and release to secure.

1/4” Tripod Screw
Screw in accessories of your choice into the screw thread on the bott om.

Cold Shoe Mount
Open ﬂ ap and place Cold Shoe Mount on opening. Screw in knob to secure.

Hand Strap
Feed Hand Strap through loop and adjust length by pulling against the buckles. SSccrreeww in knob in knob to secure secure.

Ensure your smartphone is properly aligned to the center of the wireless charging plate for opti mal charging capabiliti es.

F S llFor Smaller Phone ModelsPh M d l
If your phone’s width is <75mm, add rubber in-lay att achments onto the inside of the clamp to secure.

Connecting to Bluetooth Shutter
Press the shutt er butt on and select “Shift Cam ProGrip“ on your smartphone to pair. Short press to take photo, long press to take burst/video.

Wireless Charging
Press the Charging Butt on and att ach your smartphone onto the ProGrip securely.

Power Bank
Charge other devices simultaneously with ProGrip using USB-C cable.

ShiftCam ProGrip

Regulator Compliance
We Shift Cam Limited, declare under our sole responsibility that the product PG0001 to which this declarati on relates, complies with Part 15 of the FCC Rules. Operati on is subject to the following two conditi ons: this device may not cause harmful interference, and ( this device must accept any interference received, including interference that may cause undesired operation

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protecti on against harmful interference in a residenti al installati on. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructi ons, may cause harmful interference to radio communicati ons. However, there is no guarantee that interference will not occur in a parti cular installati on. If this equipment does cause harmful interference to radio or television recepti on, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna
Increase the distance between the equipment and the receiver
Connect the equipment to an outlet on a circuit diﬀ erent from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help

FCC Cauti on
Any changes or modiﬁ cati ons n ot expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Radia on Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

EU Compliance Statement
Shift Cam Limited hereby declares that this product is in compliance with the essenti al requirements and other relevant provisions of the R&TTE Directi ve and Radio Equipment Directi ve 2014/53/EU, and all other applicable EU directi ve requirements.

Qi BPP certi ﬁ ed and compatible with EPP
The WEEE symbol indicates that this product must not be disposedof with normal household waste. When you dispose of this product you must do so in accordance with local environmental laws and guidelines. For more information how to dispose of this product please contact your local authority, disposal service, or Shift Cam Limited directly.