PYLE PWMA850UFM Portable PA Speaker System with Flashing DJ Lights User Manual

: June 6, 2024
: Pyle

Table of Contents

SAFETY INSTRUCTION
SYSTEM FUNCTION FIGURE
INSTRUCTIONS
System Features
Technical Specifications
Customer support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PYLE PWMA850UFM Portable PA Speaker System with Flashing DJ Lights User Manual

We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the Portable PA Speaker and Microphone System. We also recommend that you keep this manual in a safe and handy place for future reference.

CAUTION
WARNING! DON’T OPEN THE MACHINE TO AVOID ELECTRIC SHOCK, PLEASE ASK HELP FROM PROFESSIONAL TECHNICIANS.

SAFETY INSTRUCTION

Read this manual carefully before using. Retain for future reference.
All warnings on the speaker and in the operating instructions should be adhered to.
Do not use this apparatus near water.
Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators,heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not install the speaker in an airtight location.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Switch OFF and unplug then use a soft cloth to clean the exterior of the unit if it becomes dirty. If necessary, use a damp cloth that has been wrung out well to wipe it.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Keep foreign objects and liquid from entering the unit to avoid a short circuit, fir and electrical accidents.
Place the speaker in a dry location.
Refer all servicing to quailed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture , does not operate normally, or has been dropped.

SYSTEM FUNCTION FIGURE

Wireless Mic/FM Receiving antenna
Power Switch
DC 12V Power Switch
Voltage Selector Switch
The function switch indicator
Work display window
AC Power Socket
DC 12V input Power Socket
USB/SD/MMC function control, function from left to right are:
Input/prev(CH-) P/P(scan)/next (CH+)/VOL-/VOL+
USB Socket
SD/MMC Socket
MIC Volume Control
MIC 1 and MIC 2 Input Jack
Echo Control
Drum Input Jack
Guitar Input Jack
Guitar Volume Control
Drum Volume Control
Tweeter
Bass Control
Volume Control
AUX Input Jack
FM radio telescopic antenna
Trailer Handle
The control panel
Racing lights
Tweeter
Woofer Speaker
Metal Corner
Vent Hole
Article package
Fixed Stand For The Unit
Truckle Of Trailer
Trailer Handle
Racing lights power
Fixed Stand For The Trailer
Trailer wheel
Mic Head
Handheld Mic RF Indicator
Handheld Mic Power Switch
Handheld Mic Battery Housing

INSTRUCTIONS

Confirm the power

AC Power: Before operation, please confirm the voltage is same as the specified marked on the label. If not, the unit will be damaged.
Built-in Rechargeable Battery: Plug-in the AC power when the rechargeable battery voltage is enough but use the battery directly. When the Low Voltage indicator turns yellow, it indicates the low battery, please charge it in time. When the Low Voltage indicator turns OFF, it indicates the voltage is standard now. If the unit will not be used for a long time, please charge the rechargeable battery every 2 months, 8-10 hours for each time

Operation Instructions

Plug the power cable into the socket and connect it with this amplifier system.
Switch ON the amplifier the red Power Indicator will be lit.
During charging, RECHARGE indicator turns red, when the indicator is flashing, that means battery is almost full and turns OFF when fully charged.
During charging, you can play music at the same time, the RECHARGE indicator will flash with the current consumption indicating the speed of charge. Charge time is in direct proportion to the volume of music. When the battery is full, RECHARGE indicator will stop flashing and turns o.
Put two AA 1.5V battery into handheld microphone (body pack transmitter), push the Power Switch to the middle, the Power Indicator will flash once, RF Indicator turns green.
Push the handheld microphone Power Switch (body pack transmitter) to ON position, your sound can be heard from amplifier when speaking.
Adjust the Volume Control/Echo Control/Treble Control/Bass Control to proper position to avoid feedback.
If the microphone Power Indicator (body pack transmitter) turns on at all times, it indicates the low battery, please replace the battery.
Connect relative guitar cable with Guitar Input Jack on this system to play music.

Wired Microphone

Two way wired microphone input jacks are supplied for two people to use simultaneously.
Plug Wired microphones into the jacks separately. Adjust Echo Control to get better sound.
Adjust the volume of each microphone to make sure the sound is satisfactory.

When you turn on the unit, be sure ECHO control is set to low or there will cause
sound distortion.

Wired Microphone