DMOS Stealth PRO Stealth Shovel Instructions

DMOS Stealth PRO Stealth Shovel Instructions

THE STEALTH SHOVEL

DEPLOYING YOUR SHOVEL

Assemble shovel

1. To remove shaft from blade storage hole, squeeze pushpins and pull T-Grip/D-Grip away from blade to remove
2. Pair 4 piece shaft to blade by inserting open end (opposite of handle) through shovel connector hole until it meets shovel connector
3. Squeeze pushpins A at shovel connector, then slide shaft end into shovel connector until pushpins

Extending the handle

1. Squeeze pushpin closest to T-Grip/D-Grip, while pulling shaft away from grip to extend Do this until sleeve catches next set of pushpins.
2. Repeat process, always starting at the pushpin closest to T-Grip/D-Grip, until you get to your desired handle

Note: If for any reason you take all the segments apart, don’t worry. Just put them back in order and clip them back into place by depressing the pushpins.

COLLAPSING YOUR SHOVEL

Collapse the shaft to its fully nested position.

1. Depress 2nd pushpin from T-Grip/D-Grip and collapse
2. Depress 1st pushpin from T-Grip/D-Grip and engage shaft holes until pushpins lock into
3. Repeat until fully

Disassemble & store shovel

1. Squeeze pushpins A at the shovel connector to release the shaft from the
2. Remove shaft from shovel connector through shovel connector
3. Insert shaft into blade storage hole, squeezing pushpins to allow it to pass through Release pushpins to secure handle. The pushpins and

T-Grip/D-Grip will hold the shaft in place.

Read More About This Manual & Download PDF:

References

• Pro-Grade Heavy-Duty Shovels for Snow, Sand or Dirt – DMOS | Pro Shovel Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>