Yenuo LOAD-100LB Soft Close Stainless Steel Full Extension Drawer Slides Side Mount Installation Guide
- August 28, 2024
- Yenuo
Table of Contents
Yenuo LOAD-100LB Soft Close Stainless Steel Full Extension Drawer Slides
Side Mount
Specifications
- Load Capacity: 100 lb (no lock)
- Width: 45mm
- Available Lengths: 10 inch – 24 inch
- Maximum Load Capacity: 100 lbs per pair
- Material: Stainless Steel
- Design: 3-fold Full Extension, Detachable, Guided by 2 Ball Cages
- Mounting: Side-mounting with screw fixing
Product Usage Instructions
How to Choose Size
To determine the appropriate size of drawer slides:
- Measure the length of the drawer.
- Measure the depth of the drawer.
- For example, if the depth is 13 inches (330mm), choose 12 inches (300mm) drawer slides.
- A deviation of 0.7 inches (25mm) – 1 inch (30mm) is acceptable.
Installation Precautions
- The space between the drawer and cabinet wall needs to be 0.5 inches on each left and right side (total 1 inch).
- The installation of the slide rails on both sides should be horizontally aligned, and the screws should be fixed in place.
Installation Instructions
- Step 1: Press the buckle to separate the inner rail (drawer portion) from the base rail (cabinet portion) of the slides.
- Step 2: Ensure both slides are leveled and run parallel to each other during installation.
- Step 3: Align the two base slides to the front edge of the cabinet.
- Step 4: Drill cabinet and drawer portions into place. Mount the screws in the permanent mounting holes.
- Step 5: Insert the drawer into the drawer box; the installation is complete. Watch our tutorial video on Amazon for a more comprehensive interpretation of the installation.
- Note: Horizontal mounting only. Do not re-drill holes on the slides as metal filings may cause damage. Ensure smooth sliding by avoiding obstacles during the sliding process.
FAQ
Q: Can these drawer slides support more than 100 lbs?
A: No, the maximum load capacity is 100 lbs per pair. Exceeding this weight
limit may cause damage to the slides.
Features
- Available in lengths: 10inch-24inch
- Maximum Load capacity: 100 lbs/pair
- Material: Stainless Steel
- 3-Fold Full Extension detachable
- Guided by: 2 ball cages side-mounting: screw fixing
How to Choose Size
- Length of drawer ≥ Length of slides rail
- Measure the depth of the drawer.
- For example, if the depth is 13in/330mm, choose 12in/300mm drawer slides.
- Deviations of 0.7in/25mm-1in/30mm are suitable.
Installation Precautions
Installation Precautions:
- The space between the drawer and cabinet wall needs to be 0.5 in each on the left and right sides (total 1in);
- The installation of the slide rails on both sides should be horizontally aligned, and the screws should be fixed in place
Installation Instruction
-
Step 1
Press the buckle to separate the inner rail ( drawer portion) from the base rail (cabinet portion ) of the slides. (the outer rail and the middle rail are inseparable). -
Step 2
Make sure the two slides are leveled, and run parallel to each other during the installation process. -
Step 3
Make sure to align the two base slides to the front edge of the cabinet. -
Step 4
- Drill cabinet and drawer portions into place.
- Mount the screws in the permanent mounting holes.
-
Step 5
Insert the drawer into the drawer box, the installation is complete Please watch our tutorial video on Amazon for a more comprehensive interpretation of the installation.
Please note a few things during the installation
- Horizontal mounting only.
- Our drawer slides are designed with multiple fixed hole positions for easy installation and adjustment. Please DO NOT re-drill holes on the slides. AS the metal filings will lodge in the tracks and cause rough running and unsmooth sliding, and even cause the slides to damage
- Make sure that there are no obstacles and other resistance during the whole sliding process. Otherwise, It will cause the slides damage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>