hama 00086440 20W USB-C PD Charger Instruction Manual
- June 1, 2024
- Hama
Table of Contents
hama 00086440 20W USB-C PD Charger
Product Usage Instructions
- Risk of Electric Shock: Indicates a risk of electric shock from touching uninsulated product parts with hazardous voltage.
- Warning: Used to indicate safety instructions or draw attention to specific hazards and risks.
- Note: Indicates additional information or important notes.
FAQ
Q: Can this charger be used worldwide?
A: Yes, the charger is suitable for mains voltages of 100 - 240 V, making it suitable for worldwide use. However, a country-specific adapter may be necessary.
Q: What should I do before cleaning the device?
A: Disconnect the device from the mains before cleaning and during prolonged periods of non-use to ensure safety.
Operating instruction
- Thank you for choosing this Hama product! Take your time and read the following instructions and information completely.
- Please keep these instructions in a safe place for future reference.
Explanation of warning symbols and notes
Risk of electric shock
- This symbol indicates a risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.
Warning
- This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
- This symbol is used to indicate additional information or important notes.
Package Contents
- charge
- these operating instructions
Safety instructions
- Protect the product from dirt, moisture and overheating and use it in dry rooms only.
- Do not drop the product and do not expose it to any major shocks.
- Do not operate the product outside the power limits specified in the technical data.
- Do not modify the device in any way. Doing so voids the warranty.
- Do not continue to operate the product if it is visibly damaged.
- Use the product only for the intended purpose.
- As with all electrical products, this device should be kept out of the reach of children.
- Do not use the product near heaters, other heat sources or in direct sunlight.
- Route all cables so there is no risk of tripping.
- Do not bend or crush the cable.
- Always pull directly on the plug when disconnecting the cable, never on the cable itself.
- Dispose of packaging material immediately under the locally applicable regulations.
- The product is intended only for use inside buildings.
- Only use the article under moderate climatic conditions.
- Do not use the product in areas in which electronic products are not permitted.
- Do not use the product in a damp environment and avoid splashing water.
Risk of electric shock
- Do not open the device or continue to operate it if it becomes damaged.
- Do not use the product if the AC adapter, the adapter cable or the mains cable are damaged.
- Do not attempt to service or repair the product yourself. Leave all service work to qualified experts.
Operation
Note – mains voltage 100 – 240V
The charger is suitable for mains voltages of 100 – 240V and therefore can be
used worldwide. Please note that a country-specific adapter may be necessary.
Warning – connecting devices
- Before connecting a device, check whether it can be adequately supplied with the charger’s current capacity.
- Ensure that the power of the connected device does not exceed 20 W.
- Note the instructions in your device’s operating manual.
Note – Power Delivery
- Plug & GO: no additional software is required, simply plug in and start:
- Thanks to Power Delivery, the voltage and power are adjusted automatically.
- Be aware that, for efficient and optimised charging, your terminal device must support the PD (Power Delivery) function.
- If you have a large number of PD-enabled devices with different firmware updates, it may be that the function is not fully supported.
Warning
- Only operate the product from a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
- Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
- If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
- If you will not be using the product for a prolonged period, disconnect it from mains power.
Unless different instructions have been expressly given in the operating instructions for the devices you are charging, proceed as follows:
- Connect your device to a USB charging socket using a suitable USB cable.
- Connect the charger to a properly installed and easily accessible mains socket.
- The charging process is displayed on your device.
- Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.
- Then disconnect the charger from the line connection.
When charging the rechargeable batteries in the device, note the maximum charging times for the built-in batteries.
Care and Maintenance
- Only use soft, dry towels to clean the product.
Note
Disconnect the device from the mains before cleaning and during prolonged
periods of non-use.
Technical data
Specifications according to Regulation (EU) 2019/1782
Brand name, commercial register number, address| Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim, Germany
Model identifier| 00086440
Input voltage| 100 – 240 V
Input AC frequency| 50 / 60Hz
Output voltage/output current/output power total| 5.0 V DC/ 3.0 A/ 15.0 W
9.0 V DC/ 2.22 A/ 20.0 W
12.0 V DC/ 1.67 A/ 20.0 W
Average efficiency during operation| 81.4 %
Efficiency at low load (10%)| 77.8%
Power consumption at zero load| 0.10 W
Warranty Disclaimer
- Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or failure to observe the operating instructions and/or safety notes.
Service & Support
- www.hama.com
- +49 9091 502-0
- Hama GmbH & Co KG 86652 Monheim/Germany
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.