MYOYAY B08Z7F76JR Pull Out Pants Rack Instruction Manual
- June 1, 2024
- MYOYAY
Table of Contents
MYOYAY B08Z7F76JR Pull Out Pants Rack
Tools Required
- Measuring tape
- Pencil
- Drill with appropriate bits
- Mounting screws (included in the kit)
Installation Requirements
- Prepare the Closet:
- Empty the area where you plan to install the Pull Out Pants Rack.
- Ensure that the closet wall is securely mounted and can support the weight of the pants hangers.
- Identify Installation Area:
- Choose a section in your closet/wardrobe side where you want to install the Pull-Out Pants Rack.
- Ensure there is enough space for the hangers to slide in and out smoothly.
- Mark Mounting Points:
- Slide out the outer rail and hold the Pull Out Pants Rack against the closet, making sure it is level.
- Mark the mounting points using a pencil through the pre-drilled holes on the hanger.
Installation
- Step 1 Install the Hangers
- Slide out the outer rail, then hold the Pull Out Pants Hanger against the closet.
- Use the screwdriver or drill to secure the hanger in place by tightening the screws. Make sure the hanger is stable and doesn’t wobble.
- Note: The rack with a knob is the font size.
- Step 2 Test
- Test the hanger by pulling it out and pushing it back in. Ensure that it glides smoothly without any resistance.
User Guide
- Pulling Out:
- To access your pants, gently pull the hanger out from the closet rod.
- The pull-out mechanism should glide smoothly. Avoid using excessive force.
Selecting Pants:
- Easily browse through your pants collection without disturbing the rest.
- Choose the pair you want, and gently slide the hanger back into place.
Maintenance
- Periodically check the screws and tighten them if necessary to maintain stability.
- Keep the hangers clean and free from any obstructions.
Weight Limitations
- Be mindful of the weight capacity: 55lb(25kg).
- Avoid overloading the hanger to ensure smooth operation and longevity.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>