MORRIS CIW-10718 Combi Washer Dryer User Manual
- June 13, 2024
- MORRIS
Table of Contents
CIW-10718
USER MANUAL
COMBI WASHER DRYER
CIW-10718 Combi Washer Dryer
Please read this manual carefully before use this product
Congratulations to your new machine !
This user manual will help you discover all the benefits of your machine and
use it the way you want.
We strongly recommend that you read this manual carefully before using the
washer dryer for the first time. It contains important safety instructions and
information relating to the installation, operation and maintenance. Proper
handling contributes to efficient, environmentally friendly and safe use and
minimises energy consumption during operation. Please always keep the proof of
purchase to preserve any warranty claims.
These instructions for use are in general terms. This means: Certain functions
apply to your machine, while others do not. We are continuously working on the
further development and improvement of our unit types and models.
Therefore, we reserve the right to make changes to the design, features and
accessories of all types and models without prior notice.
On our website www.morris.gr you can also download the
user manual in digital form and discover other products. We hope you enjoy
using your machine.
Explanation of symbols
| Danger
This symbol indicates that there are dangers to the life and healthof persons
due to extremely fammable gas.
---|---
| Warning of electrical voltage
This symbol indicates that there is a danger to life and health of
persons due to voltage.
| Warning
The signal word indicates a hazard with a medium level of risk which, if not
avoided, may result in death or serious injury.
| Caution
The signal word indicates a hazard with a low degree of risk which, if not
avoided, may result in minor or moderate injury.
| Notice:
The signal word indicates important information (e.g. damage to property), but
not danger.
| Observe instructions
Notes with this symbol indicate that you should read the operating
instructions carefully.
| Observe instructions
This symbol indicates that a service technician should only operate and
maintain this appliance in accordance with the operating instructions.
SAFETY INSTRUCTIONS
INTENDED USE
The product is intended only for home use and for textiles in household
amounts suitable for washing and drying. This appliance is for indoor use only
and not intended for built in use. Only use according to these instructions.
The appliance is not intended for commercial use.
Any other use is considered as improper use. The producer is not responsible
for any damage or injuries that may result of it. This appliance is intended
to be used in household and similar applications such as:
- Staff kitchen areas in shops, offices and other working environments;
- Farm houses;
- By clients in hotels, motels and other residential type environments;
- Bed and breakfast type environments;
- Areas for communal use in blocks of flats or in launderettes.
1.1 Safety Instructions
Please read the following safety information thoroughly and follow it strictly
to minimize the risk of fire or explosion, electric shock and to prevent
property damage, personal injury or
loss of life. Failing to follow these instructions shall void any warranty.
Warning! This combination of symbol and signal word indicates a
potentially dangerous situation which may result in death or serious injuries
unless it’s avoided.
Caution! This combination of symbol and signal word indicates a
potentially dangerous situation which may result in slight or minor injuries
or damage to property and the environment.
Note! This combination of symbol and signal word indicates a potentially
dangerous situation which may result in slight or minor injuries.
SAFETY INSTRUCTIONS
Warning!
ELECTRIC SHOCK HAZARD
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- If the machine is damaged, it must not be operated unless repaired by the manufacturer, its service agent or similarly qualified persons.
- Risk of electric shock!
- The appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Children should be supervised that they do not play with the appliance.
- Children 3 years and under shall be kept away from the appliance or continuously supervised.
- Animals and children may climb into the machine. Check the machine before every operation.
- Do not climb or sit on the appliance.
INSTALLATION LOCATION AND SURROUNDING
- All washing and additional substances are to be kept in a safe place out of the reach of children.
- Do not install the machine on a carpet floor. The obstruction of the openings by a carpet can damage the machine.
- Keep the appliance clear from heating sources and direct sunlight to avoid plastic and rubber parts to corrode.
- Do not use the appliance in humid environments or rooms containing explosive or caustic gas. In case of water leakage or water splashes let the appliance dry in the open air. The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the washer dryer.
- Do not operate the machine in rooms with a temperature of below 5°C. This can cause damages to parts of it. If it is unavoidable, make sure to drain the water completely from the appliance after every use (see “Maintenance – Cleaning of drain pump filter”) to avoid damages caused by frost.
- Never use flammable sprays or substances in the immediate proximity of the appliance.
INSTALLATION
- Remove all packaging material and transport bolts before using the appliance. Otherwise, serious damage may result.
- This appliance is equipped with a single inlet valve and can be connected to the cold water supply only.
- Mains plug must be accessible after installation.
- Before washing clothes for the first time, the product shall be operated once throughout all the procedures without any clothes inside.
- Before using the washer dryer, the product shall be calibrated.
- Do not put any excessively heavy objects on the appliance, like water containers or heating devices.
- The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
- Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.05 MPa.
ELECTRICAL CONNECTION
- Make sure the supply cable is not trapped by the machine, it can get damaged.
- Connect the product to a grounded outlet protected by a fuse complying with the values in the “ Technical specifications” table. The grounding installation has to be made by a qualified electrician. Ensure that the machine is installed in accordance with the local regulations.
- Water and electrical connections must be carried out by a qualified technician in accordance with the manufacturer’s instructions and local safety regulations.
Warning!
- Don´t use multiple plugs or extension cords.
- The appliance must not have an external switching device such as a timer or connected to a circuit that is regularly switched on and off.
- Do not pull the plug out of the mains outlet if there is flammable gas around.
- Never pull out power plug with wet hands.
- Always pull at the plug, not at the cable.
- Always unplug the appliance if it is not being used.
WATER CONNECTIONS
- Check the connections of the water inlet tubes, the water tap and the outlet hose for possible problems due to changes of water pressure. If the connections loosen or leak, close the water tap and get it repaired.
- Do not use the appliance before the pipes and hoses are installed properly by qualified persons.
- Glass door may become very hot during the operation. Keep children and pets far away from the machine while it is operating. The water inlet and outlet hoses have to be safely installed and remain undamaged.
- Otherwise, water leakage can occur.
- Do not remove the drain pump filter while there is still water in the appliance. Big quantities of water can leak out, and there is a risk of scalding due to hot water.
OPERATION AND MAINTENANCE
Warning!
- Never stop the washer dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat can dissipate.
- The washer dryer is not to be used if industrial chemicals have been used for cleaning. Risk of explosion.
- Never use any flammable, explosive or toxic solvents. Do not use gasoline and alcohol etc. as detergents. Only select detergents that are suitable for machine washing.
- Make sure that all pockets are emptied. Sharp and rigid items such as coins, brooches, nails, screws, stones etc. may cause serious damages to this machine.
- Remove all objects from pockets such as lighters and matches before use the appliance. Thoroughly rinse items that have been washed by hand.
- Do not dry unwashed items in the appliance. Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, wax and wax removers should be washed in hot with an extra amount of detergent before being dried in the appliance.
- Items containing foam rubber (latex foam), shower caps, water proof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the machine.
- Fabric softeners or similar products should be used are recommended in their instructions.
- Never try to open the door forcefully.
- The door will unlock shortly after the end of a cycle.
- Please do not close the door with excessive force. If it is found difficult to close the door, please check if the clothes are properly inserted and distributed.
- Always unplug the appliance and close the water tap before cleaning and maintenance and after each use.
- Never pour water over the appliance for cleaning purpose. Risk of electric shock!
- Repairs shall only be carried out by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- The producer will not be responsible for damages caused by the intervention of not authorized persons.
TRANSPORT
- Before Transport:
- Bolts shall be reinstalled to the machine by a specialized person;
- Accumulated water shall be drained out of the machine.
- This appliance is heavy. Transport with care.
Never hold any protruding part of the machine when lifting. The machine door can not be used as a handle.
ENVIRONMENT
Disposal of old appliances
(Only for EU countries)
This appliance is labelled in accordance with the European Directive
2012/19/EU on waste electrical and electronic equipment (WEEE). The directive
provides the framework for the EU-wide take-back and recycling of waste
equipment.
The devices marked with this symbol
must not be disposed of in household waste!
As a manufacturer, we ensure environmentally friendly treatment and
recycling of old appliances within the scope of product responsibility. Our
products are registered with the authorities for electrical appliances and
packaging. For further information on collection and disposal, please contact
your local authority, city council or your (specialised) retailer. Already
during the development of new appliances, we pay attention to a high
recyclability of the materials used. High recycling rates are achieved via the
take-back system to reduce the burden on waste dumps and the environment.
Together, we are making an important contribution to environmental protection.
INSTALLATION
2.1 Product Description
1. Service flap
2. Door
3. Detergent dispenser| 4. Control panel
5. Drain hose
6. Power supply cord
---|---
Note!
• The product picture is for illustration only, please refer to real product
as reference.
Accessories
2.2 Installation
Tools Needed If Installation By Yourself (not include)
Installation area
Warning!
- Stability is important to prevent the product from wandering!
- Make sure the machine is standing leveled and stable.
- Make sure that the product does not stand onto the power cord.
- Make sure to maintain the minimum distances from the walls as shown in the picture
Before installing the machine, the location characterized as follows shall be selected:
- Rigid, dry, and level surface
- Avoid direct sunlight
- Sufficient ventilation
- Room temperature is above 5°C
- Keep far away from the heat sources such as coal or gas burning appliances.
Unpacking the machine
Warning!
- Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
- There is a risk of suffocation ! Keep all packaging well away from children.
- Remove the cardboard box and styrofoam packing.
- Lift the washer dryer and remove the base packaging. Make sure the small triangle foam (a) is removed with the bottom packaging together. If not, lay the unit down on the side surface and remove it manually.
- Remove the tape securing the power supply cord and drain hose.
- Remove the inlet hose from the drum.
Remove transport bolts
Warning!
• You must remove the transport bolts from the backside before using the
product.
| |
---|---|---
Loosen the 4 transport bolts with
a spanner.| Remove the bolts including the rubber
parts and keep them for future use.| Close the holes using the cover
caps.
Levelling the machine
Warning!
• The lock nuts on all four feet must be screwed tightly against the housing.
- Loosen the lock nut.
- Turn the foot until it reaches the floor.
- Adjust the legs and lock the nuts with a spanner. Make sure the machine is level using a spirit level.
Connect the water supply hose
Warning!
To prevent leakage or water damage, follow the instructions in this chapter.
- Do not kink, crush or modify water inlet hose.
Connect the water supply hose to the water inlet valve and a water tap with cold water as indicated.
Note!
• Connect manually, do not use tools. Check if the connections are tight.
Drain Hose
Warning!
- Do not kink or protract the drain hose.
- Position drain hose properly ,otherwise damage might result of water leakage.
- It is not allowed to remove the buckle of drain pipe.
There are two ways to place the end of drain hose:
|
---|---
1.Put it into the water trough.| 2.Connect it to the branch drain pipe of the
trough.
Acoustic Sponge
Note!
- Please make sure to assemble the acoustic sponges, which can effectively reduce the noise caused by the machine while working, in order to provide you with a more peaceful and quiet living environment.
|
---|---
- Get the machine laid on the floor, using some soft material like foam or clothes between the machine and floor for a protection;
- Stick the 2x longer sponges to the longer bottom edges of machine, and the 2x shorter sponges to the shorter bottom edges.
OPERATION
3.1 Quick Start
Caution!
- Before washing, please make sure the washer dryer is installed properly.
- Your appliance was thoroughly checked before it left the factory. To remove any residual water and to neutralize potential odors, it’s recommended to clean your appliance before first use. For this reason, start the Cotton program at 90°C without laundry and detergent.
Calibration
It’s recommended to calibrate the washer dryer, so that provide the best
performance.
The appliance is able to detect the amount of laundry loaded. This function is
optimizing the product performance by minimizing energy and water consumption,
saving you money and time. For this reason it’s recommended to calibrate the
appliance for best use.
-
Remove all accessories from the drum and close the door;
-
Insert the main plug to the socket;
-
Switch on the washer dryer and press “Temp.” and “Dry” simultaneously for 10 seconds until “t19” is displayed;
-
Press [ ] to start the appliance and wait till “****” is displayed.
1. Before Washing
| |
---|---|---
Plug in| Open tap| Load
| |
Close door| Add detergent|
Note!
- Detergent need to be added in compartment I if the pre-wash function is selected.
- Do not put laundry beads into the detergent dispenser.
2. Washing
|
---|---
Power on| Select programme
|
Select function or remaindefault settings| Press Start/Pause to start the
program
3. After Washing
Buzzer beep and “End” on display.
3.2 Before Each Washing
- The ambient temperature of the washer dryer should be 5 -40°C. If used under 0°C, the inlet valve and draining system may be damaged. If the machine is installed under freezing conditions, it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose can unfreeze before use.
- Please check your laundry care labels and the detergent use instructions before wash. Use non-foaming or less-foaming detergent suitable for machine properly. °C
|
---|---
Take all items out of the pockets| Sort laundry according to color and textile
type
|
Tie together long textile strips and belts, close zips and button| Put small
items into a laundry bag
Warning!
- Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive substances like wax, oil, paint, gasoline, alcohol, kerosene, and other flammable materials.
- Washing single clothes items may easily create big eccentricity . Therefore it is suggested to add one or two more laundry items to the wash so that spin can be done smoothly.
- Do not wash, spin, or dry water-proof seats, mats, or clothing.
3.3 Detergent Dispenser
I Pre wash
II Main wash
Softener
Release button to pull out the dispenser|
---|---
Caution!
- Detergent only need to be added in compartment I ”after selecting pre-wash function.“
- Do not put laundry beads into the detergent dispenser.
Programme| | | | Programme| | |
---|---|---|---|---|---|---|---
Cotton| | | | Rinse & Spin| | |
Mix| | | | Wool| | |
Baby Care| | | | ECO 40-60| | |
20℃| | | | Intensive| | |
Drum Clean| | | | Quick 15’/1h WD| | |
Spin Only| | | | Dry Only| | |
Wash and Dry| | | | | | |
Means must Means optional
Detergent Recommendation
Recommended washing
detergent| Type of laundry and textile| Wash cycles| Washing temp. °C
---|---|---|---
Heavy-duty detergent with bleaching agents and optical brighteners| White
laundry made from boil-proof cotton or linen| Cotton, ECO 40-60,Mix,
Intensive| 40 60 /90/
Colour detergent without bleaching agent and optical brighteners| Coloured
laundry made from cotton or linen| Cotton, ECO 40-60Mix,Intensive, 20°C|
Cold/20/ 30/40
Color or mild detergent without optical brighteners| Coloured laundry made
from easy care fibres or synthetic materials| 20°C| Cold/20
Mild washing detergent| Delicate textiles, silk, viscose| Wool| 20 30/
Special wool detergent| Wool| Wool| 20 30/40/
Note!
- Agglomerating or ropy detergent or additive can be diluted in some water before pouring it into the detergent dispenser, to avoid its inlet to get blocked and thus cause a water overflow.
- Please choose the suitable type of detergent to get a maximum of washing performance and a minimum of water and energy consumption.
- To achieve the best cleaning result a proper detergent dosing is important.
- Use a reduced detergent amount if the drum is not filled completely.
- Always adjust the amount of detergent to the water hardness, if your tap water is soft, use less detergent.
- Dose according to how dirty your laundry is, less dirty clothes require less detergent.
- Highly concentrated (compact detergent) requires particularly accurate dosing.
Following symptoms are a sign of detergent overdosing:
- heavy foam formation
- poor washing and rinsing result
Following symptoms are a sign of detergent underdosing:
- laundry turns grey
- built-up of limescale deposits on the drum, the heating element and/or the laundry
3.4 Control Panel
Model: CIW-10718
-
On/Off
Turn the appliance on and off. -
Start/Pause
Start or pause your programme. -
Option
This allows you to select additional functions and will light when selected. -
Programmes
Available according to the laundry type. -
Display
The display shows settings, estimated remaining time, options and status messages.
3.5 Display
A Display
Wash Time
Speed
End
| Delay Time
Error
Temp.
---|---
B Pre Wash
D Door Lock
F Extra Rinse
H Delay
J Pre Wash-Wash-Rinse-Spin| C Reload
E Child Lock
G Speed Wash
I Spa Care
---|---
3.6 Programmes
Programmes are available according to the laundry type.
Programmes
Cotton| Hard-wearing textiles, heat-resistant textiles made of cotton or
linen.
---|---
Baby Care| Washing the baby’s clothes, it can make the baby’s wear cleaner
and make the rinse performance better to protect the baby skin.
Mix| Mixed load consisting of textiles made of cotton and synthetics.
20℃| 20℃ default, can choose cold water.
ECO 40-60| Default 40℃,not selectable, suitabale for laundry washing at about
40℃-60℃.
Quick 15′ 1h W/D| Extra short programme approx, suitable for lightly soiled
washing as a small amounts of laundry.
For small synthetic clothes or shirts, load limitation is 1 kg (about 4
shirts).
Wool| Hand or machine-washable wool or richwool textiles.
Especially gentle wash programme to prevent shrinkage, longer programme pauses
(textiles rest in wash liquor).
Spin Only| Extra spin with selectable spin speed.
Rinse&Spin| Extra rinse with spin.
Intensive| To increase the washing effects, washing time is increased.
Drum Clean| Specially set in this machine to clean the drum and tube. It
applys 90 °C high temperature sterilization to make the clothes washing more
green. When this programme is performed, the clothes or other washing cannot
be added. When proper
amount of chlorine bleaching agent is put in, the barrel cleaning effect will
be better. The customer can use this programme regularly according to the
need.
Dry Only| Select it to dry clothes, the temperature is different .
The drying time according to the load .
Wash and Dry| The standard energy program.
The wool wash cycle of this machine has been approved by The Woolmark Company
for the washing of machine washable wool products provided that the products
are washed according to the instructions on the garment label and those issued
by the manufacturer of this washing machine.
Model : CIW-10718
| Programme| Washing Load/Dry Load(kg)| Display Time
---|---|---|---
| Cotton| 10.0/7.0| 3:39
| Mix| 10.0/7.0| 1:20
| Wash and Dry| 10.0/7.0| 5:03
| Dry Only| -/7.0| 4:10
| 20℃| 5| 1:01
| Baby Care| 5.0/5.0| 1:42
| Drum Clean| –| 1:18
| Spin Only| 10| 0:12
| Rinse&Spin| 10| 0:20
| Wool| 2| 1:07
| ECO 40-60| 10| 3:59
| Intensive| 10| 3:48
| Quick 15’/1h WD| 2.0/1.0| 0:15
- The above data is for reference only, and the data may change due to different actual use conditions.
- The valves given for programmes other than the ECO 40-60 programme and the Wash and Dry cycle are indicative only.
- Concerning to EN 60456:2016+A11:2020 With(EU) 2019/2014, (EU) 2019/2023, (EU) 2021/340, (EU) 2021/341,
The EU energy efficiency class is: D
Energy test program: ECO 40-60. Other as the default.
Half load for 10.0kg machine:5.0kg.
Quarter load for 10.0kg machine:2.5kg.
Energy test program: Wash and Dry;Extra Dry. Other as the default.
Dry load for 10.0kg machine:7.0kg.
Half load for 7.0kg machine:3.5kg.
- The highest temperature reached by the laundry in the wash cycle for at least 5 minutes.
- Residual moisture after the wash cycle in water content percent and the spin speed at which this was achieved.
- The ECO 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle. This programme is used to assess the compliance with the regulation (EU) 2019/2014, (EU) 2019/2023, (EU) 2021/340, (EU) 2021/341.
- The Wash and Dry programme, is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle, and to dry it in such a way that it can be immediately stored in a cupboard. This programme is used to assess the compliance with the regulation (EU) 2019/2014, (EU) 2019/2023, (EU) 2021/340, (EU) 2021/341.
The most efficient programmes in terms of energy consumption are generally
those that perform at lower temperatures and longer duration.
Loading the household machine up to the capacity indicated for the respective
programmes will contribute to energy and water savings.
Noise and remaining moisture content are influenced by the spinning speed: the
higher the spinning speed in the spinning phase, the higher the noise and the
lower the remaining moisture content.
Caution!
• If there is any break in the power supply while the machine is operating, a
special memory stores the selected programme. The machine will continue the
programme when the power supply is re-established.
3.7 Option
Cycle| Default
Temp.(℃)| Default
spin speed| Additional
functions
---|---|---|---
| | 1500|
Cotton| 40| 800|
Mix| 40| 800|
Wash and Dry| –| 1500|
Dry Only| –| 1200|
20℃| 20| 1000|
Baby Care| 60| 1000|
Drum Clean| 90| —|
Spin Only| –| 1000|
Rinse & Spin| –| 1000|
Wool| 40| 600|
ECO 40-60| –| 1500|
Intensive| 40| 800|
Quick 15’/1h WD| Cold| 800|
Note!
- For the maximum spin speed, program time, and other details of the ECO 40-60 and Wash and Dry programs, please refer to the content on the Product Fiche page.
- The table shows which cycle offers which options for adjustment.
Delay
Set the Delay function:
- Select a programme;
- Press the Delay button to choose the time(the delaying time is 0-24 H.);
- Press [Start/Pause] to commence the delay operation
Cancel the Delay function:
Press the [Delay] button until the display be 0H.It should be pressed before
starting theprogramme. If the programme already started, should switch off
programme to reset a new one.
Caution!
• If there is any break in the power supply while the machine is operating, a
special memory stores the selected programme and when the power is restarted,
the program will continue.
| Pre Wash
The Prewash function can get an extra wash before main wash,it is suitable for
washing the dust rises to surface of the clothes;You need to put detergent
into the Case (I) when select it.
---|---
| Extra Rinse
The laundry will undergo extra rinse once after you select it.
| Speed Wash
The function can decrease the washing time.
| My Cycle
To memory the frequently used programme.
After choosing the programme and setting the options, press [Temp.] 3 sec.
before start to wash.The default setting course is Cotton.
| Temp.
Press the button to regulate the temperature (Cold,20℃,30℃, 40℃,60℃,90℃)
| Speed
Press the button to change the speed.
1400: 0-400-600-800-1000-1200-1400
1500: 0-400-600-800-1000-1200-1400-1500
---|---
| Reload
This operation can be executed during the washing progress.
When the drum is still rolling and there is large amount of water with high
temperature in the drum.
The state is unsafe and the door can not be opened forcefully.
To press [Start/Pause] for 3 sec. to reload, and start the clothes adding in
the midway function. Please follow the steps as bellow:
1.Wait until the drum stops rotation.
2.The door lock is unlocked.
3.Close the door when the clothes are reloaded and press the [Start/Pause]
button.
| SpaCare
SpaCare function can be selected by choose “Cotton”,“Mix”and “Baby Care”.
The customers can see the steam in the drum when operate SpaCare function. The
SpaCare cannot be used simultaneously With Pre Wash and Speed Wash.
Caution!
• Don’t use the Reload function when the water level over the edge of the
inner tub or the temperature is higher.
Dry
Press the Dry button continuously to choose the dry level:
Extra Dry/Normal Dry(Normal)/ Gentle Dry(Soft).
Extra Dry: Need to wear clothes immediately ,we can choose this function;
Normal Dry(Normal):The normal dry procedure;
Gentle Dry(Soft):Only to dry slightly and then is just ok;
Timed Dry: We can choose this function to dry clothes for a specific time.
Note!
- Drying hints
- Thoroughly spin you laundry before drying.
- To ensure proper drying, please sort your laundry according to the fabric type and drying temperature.
- Clothes not suitable for drying
- Particularly delicate items such as synthetic curtains, woolen and silk, clothes with metal inserts, nylon stockings, bulky clothes, such as anoraks, bedcovers, quilts, sleeping bags and duvets must not be dried.
- Clothes padded with foam-rubber or materials similar to foam rubber must not be machine dried.
- Fabrics containing residues of setting lotions or hair sprays, nail solvents or similar solutions must not be machine dried in order to avoid the formation of harmful vapours.
Child Lock
To avoid mis operation by children.
Press [Delay] and [SpaCare] 3 sec. till buzzer beep.
Caution!
When child lock is activated and program starts, child lock indicator will
switch on, and remaining time on the display “CL” are alternately displayed.
Press the other buttons will make child lock indicator flash. when program
finish, alternate “CL” and “END” on the display.
- Only press and hold the two button can release child lock, even power off, switch off and program end.
- The “Child Lock” will lock all buttons except Power button and Child Lock button.
- Please release child lock before selecting program and staring washing.
Mute the buzzer
To act the buzzer function, press the button again for 3 seconds.
The setting will be kept until the next reset.
Caution!
• After Muting the buzzer function, the sounds will not be activated any
more.
MAINTENANCE
4.1 Cleaning and Care
Warning!
• Always unplug the appliance and close the water tap before cleaning and
maintenance.
Cleaning the Cabinet
Proper maintenance on the washer dryer can extend its working life. The
surface can be cleaned with diluted non-abrasive neutral detergents when
necessary. If there is any water overflow, use a towel to wipe it off
immediately.
Never use sharp items to clean the appliance.
Caution!
- Never use abrasive or caustic agents. formic acids or its diluted solvents or similar substances, like alcohol or chemical products.
Cleaning the Drum
Any rust stains left inside the drum by metal articles must be removed
immediately using chlorine-free detergents. Never use steel wool for cleaning
the drum!
Note!
• Keep any laundry away from the machine while cleaning the drum.
Cleaning the Door Seal and Glass
Wipe the glass and seal after each wash to remove lint and stains. If lint
builds up it can cause leakages.
Remove any coins, buttons and other objects from the seal after each wash.
Clean the Door Seal and Glass every month to ensure the normal operation of
the appliance.
Cleaning the Inlet Filter
Note!
• Diminishing water flow is a sign that the filter need to be cleaned.
|
---|---
1. Close the tap and remove the water supply hose from it.| 2. Clean the
filter with a brush.
|
3. Unscrew the water supply hose from the backside of the machine.
Pull out the filter with long nose pliers.| 4. Use a brush to clean the
filter.
5. Reinstall the filter to the water inlet and reconnect the water supply
hose.
6. Clean the Inlet filter every 3 months to ensure the normal operation of
the appliance.
Cleaning the Detergent Dispenser
- Press down the release [ ] on the softener cover and pull the dispenser drawer out of the recess. Clean the inside of the recess with a brush.
- Lift the softener cover off the dispenser drawer and wash both items with water.
- Restore the softener cover and push the drawer back into the recess.
|
---|---
Press the release and remove the dispenser drawer| Clean the dispenser drawer
and the softener cover under water
|
Clean the recess with an soft brush| Insert the dispenser drawer
Note!
- Do not use abrasive or caustic agents to clean plastic parts.
- Clean the detergent dispenser every 3 months to ensure the normal operation of the appliance
Cleaning the Drain Pump Filter
Warning!
- Make sure that the machine has finished the washing cycle and is empty. Switch it off and unplug it before cleaning the drain pump filter.
- Be careful of hot water. Wait for water cooling down. Risk of scalding!
- Clean the filter periodically every 3 months to ensure the normal operation of the appliance.
|
---|---
Open the lower cover cap| Pull out the emergency drain hose, and take off the
hose cap
|
After water runs out, reset the drain hose| Open the filter by turning to the
counter clockwise
|
Remove extraneous matter| Carefully reinsert the filter and screw the lower
cover cap in clockwise
Caution!
- Make sure emergency drain hose cap and the emergency drain hose are reinstalled properly, otherwise water may leak.
- Some machine don’t have emergency drain hose, so step 2 and step 3 can be skipped. Rotate lower cover cap directly to make water run into basin.
4.2 Trouble Shooting
Whenever there is a problem with the appliance, check if you can solve it
following the tables below. If the problem persists, please contact the
customer service.
Description | Possible cause | Solution |
---|---|---|
Appliance does not start | Door is not closed properly. Clothes are stuck. |
Close the door properly and restart.
Check the laundry.
Door can´t be opened| Safety protection is activated.| Disconnect the power
and restart.
Water leakage| Connections are not tight enough.| Check and fasten the water
inlet pipe. Check and clean the outlet hose.
Detergent residues in the detergent dispenser| Detergent is damp and/or
clotted.| Clean and wipe the detergent dispenser dry.
Indicator or display does not work| PC board or harness have connection
problems.| Switch off the power and check if the mains plug is connected
properly.
Abnormal noise| Fixing bolts still in place.
Floor is not solid or level.| Check if the fixing bolts have been removed.
Make sure the appliance is installed on a solid and level floor.
Error Codes
Description | Possible cause | Solution |
---|---|---|
Door is not closed properly. | Close the door properly and restart. | |
Water injecting problem during | ||
wash cycle. | Check if the water pressure is high enough. |
Straighten the water pipe.
Clean the inlet valve filter.
| Overtime water draining| Check the drain hose for blockage.
| Water overflow| Restart the appliance.
| Others| Restart the appliance. If problem persists, please contact the
customer service.
4.3 Customer Service
Spare part for your appliance are available for a minimum of 10 years .
following EU COMMISSION REGULATION 2019/2023 ANNEX II Ecodesign requirements
In case of questions, please contact our local customer service center.
Warning!
Risk of electric shock
-
Never try repair an appliance which is defective of presumed to defective. You may put your own and future users’ lives in danger.
Only authorised specialists are allowed to carry out this repair work. -
Improper repair will void the warranty and subsequent damages can’t be recognized!
Transport
IMPORTANT STEPS WHEN MOVING THE APPLIANCE
- Unplug the appliance and close the water inlet tap.
- Check, if the door and the detergent dispenser are closed properly.
- Remove the water inlet pipe and the outlet hose from the house installations.
- Let the water drain completely from the appliance (see “Maintenance Cleaning the drain pump filter”)
- Important: Re-install the 4 transport bolts in the back of the appliance.
- This appliance is heavy. Transport with care. Never hold any protruding part of the machine when lifting. The machine door can not be used as a handle.
TECHNICAL SPECIFICATION
Model | CIW-10718 |
---|---|
Power Supply | 220-240V~,50Hz |
MAX.Current | 10A |
Standard Water Pressure | 0.05MPa~1MPa |
Washing Capacity | 10.0kg |
Dry Capacity | 7.0kg |
Dimension | |
A | 595mm |
B | 850mm |
C | 595mm |
D | 1060mm |
E | 135mm |
F | 630mm |
G | 605mm |
H | 1095mm |
Weight | 72kg |
Rated Power | 1900W |
Drying power | 1300W |
PRODUCT FICHE
Supplier’s name or trade mark(a) (b): MORRIS
Supplier’s address(a) (b):_ 87A, 17th Noemvriou str., 55535, Pylea,
Thessaloniki, Greece
Model identifier (a): CIW-10718
General product parameters:
Parameter | Value | Parameter | Value |
---|---|---|---|
Rated capacity (kg) | Rated capacity (c) | 7.0 | Dimensions in cm (a)(b) |
85
Rated washing capacity (b)| 10.0| Width| 60
Depth| 57
Energy Efficiency Index| EEIw (b)| 52.| Energy efficiency class| EEIw (b)| A
(e)
EElwo (c)| 67.| EEIwo (c)| D (e)
Washing efficiency index| Iw (b)| 1.| Rinsing effectiveness (g/kg dry
textile)| Ir (b)| 5.0
jw (c)| 1.| jr (c)| 5.0
Energy consumption in kWh per kg per cycle, for the washing cycle of the
household washer- ry dryer, using the eco 40-60 programme at a combination of
full and partial loads. Actual energy consumption will depend on how the
appliance is used| 0.513| Energy consumption in kWh per
k g per cycle, for the wash and dry cycle of the household washer-dryer at a
combination of full and half loads. Actual on how the appliance is used|
3.422
Water consumption in litre per cycle, for the eco 40-60 programme at a
combination of full and partial loads. Actual water consumption will depend on
how the appliance is used and on the hardness of the water| 52| Water
consumption in litre per cycle, for the wash and dry cycle of the household
washer-dryer at a combination of full and half loads. Actual water consumption
will depend on how the appliance is used and on the hardness of the water| 100
Maximum temperature inside the treated textile (°C) for the washing cycle of
the household washer- dryer, using the eco 40- 60 programme| Rated
washing
capacity| 37| Maximum temperature inside
the treated textile (°C) for the
washing cycle of the household
washer-dryer, using the wash
and dry cycle| Rated capacity| 34
Half| 3 I| Half| 25
Quarter| 23
Spin speed (rpm) (b)| Rated
washing
capacity| 1450| Weighted remaining moisture
content (%) (b)| 54.
Half| 1450
Quarter| 1450
Eco 40.60 programme duration (h:min)| Rated
washing
capacity| 3:59| Spin-drying efficiency class (b)| B (e)
Hall| 3:00
Quarter| 3:00
Airborne acoustical noise
emissions during the spinning
phase for the eco 40-60 washing
cycle at rated washing capacity
(dB(A) re I pW)| 80| wash and dry cycle duration
(h:min)| Rated
capacity| 9:40
Half| 7:00
Type| free-standing| Airborne acoustical noise emission class for the spinning
phase for the eco 40-60 programme at rated washing capacity| ( I’)
Off-mode (W) (if applicable)| 0.50| Standby mode (W) (if applicable;| N/A
Delay start (W) (if applicable)| 4.00| Networked standby (W) (if applicable)|
N/A
Minimum duration of the guarantee offered by the supplier (a)(b)
This product has been designed to release silver ions during the washing
cycle| NO
Additional information (a)(b)
Weblink to the supplier’s website, where the information in point 9 of
Annex II to Regulation (EU) 2019/2023 is found:
(a) this item shall not be considered relevant for the purposes of Article
2(6) of Regulation (EU) 2017/1369.
(b) for the eco 40-60 programme.
(c) for the wash and dry cycle.
(d) changes to this item shall not be considered relevant for the purposes of
paragraph 4 of Article 4 of Regulation (EU) 2017/1369.
(e) if the product database automatically generates the definitive content of
this cell the supplier shall not enter these data.’
- The actual energy consumption will depend on how the appliance is used.
- The actual water consumption will depend on how the appliance is used and on the hardness of the water.
- Delivery of the spare parts within 15 working days after having received the order.
Product Data Sheet concerning (EU) 2019/2014, (EU) 2019/2023, (EU)2021/340,
(EU) 2021/341.
The product data sheet for your appliance can be found online. Go to
https://eprel.ec.europe.eu and enter the model identifier for your appliance
to download the data sheet.
The model identifier for your appliance can be found in the technical
specifications section.
NOTES
Warranty
We provide a guarantee for this machine in accordance with the following
conditions: You have a manufacturer’s warranty of years from the date of
purchase (proof of purchase must be provided). Our General Terms and
Conditions apply.
Your device / serial number…………………….
Purchase date:………………………………………..
Place of purchase:…………………………………..
Do you have any questions ?
We are happy to support you !
http://www.morris.gr
IMPORTER:
Kalliopi Karyda & Co, LP
87A, 17th November str. 55535, Pylea, Thessaloniki Tel. 2316 006600
Fax. 2316 006650
www.morris.gr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>