WORK SHARP Mod Tools Fixed Blade with Sharpener Instruction Manual
- August 28, 2024
- WORK SHARP
Table of Contents
WORK SHARP Mod Tools Fixed Blade with Sharpener Instruction Manual
GETTING TO KNOW
YOUR WORK SHARP® HUNTING FIXED BLADE MOD-TOOL
PRODUCT OVERVIEW
SHARPENER MOD-TOOL
(comes installed in mod-tool pocket)
HOW TO REMOVE YOUR MOD-TOOL
-
With sheath on, insert index finger into Mod-tool removal finger detent and push Mod-tool, so it slides towards the front of the knife. This will disengage the magent.
-
Pull Mod-tool away from the handle to remove
- TIP: Slide your finger nail under the Mod-tool when putting using the finger detent to give you more leverage while removing from the handle.
WARNING! Work Sharp™ Knives are incredibly sharp, always use with safety in mind. Read and follow these instructions for proper use and maintenance, Always have the sheath on the blade when removing or stowing the Mod-tool.
HOW TO STOW YOUR MOD-TOOL
- Ensure the Mod-tool pocket is clear of debris.
Insert the Podtool at an angle with the pod tool retention lip on the
- bottom, facing the finger detent of the fixed blade handle.
CAUTION! This knife is very sharp (that’s probably why you bought it)!
Accordingly, this knife is potentially dangerous and should be treated with
great care and respect. So, exercise caution when unwrapping, using, storing,
and/or maintaining this knife. Work Sharp® assumes no responsibility for cuts,
scratches, or other injuries/damage to you or your property resulting from the
use of this knife.
HOW TO USE:
SHARPENER MOD-TOOL
- Place the side of the knife flat on the Guide closest to the handle so the cutting edge is on the abrasive and PUSH the knife edge away and along the abrasive surface.
- Repeat this step using the opposing Guide and PULL the knife edge toward and along the abrasive surface.
- Alternate for 5-10 strokes.
- Use steps 1-3 to work through the abrasive progression in relation to your knife’s level of dullness.
- SHAPE (Very Dull): 320 Diamond abrasive.
- SHARPEN (Dull): 600 Diamond abrasive.
- HONE (Somewhat Dull): ceramic honing rod on sheath
HONING SHEATH
- TIP: Most knives can be sharpened with the 600 diamond plate and fine ceramic rod. Regular hone’s on the sheath will reduce the number of times you need to go through the entire abrasive progression and increase the longevity of your knife.
WARRANTY
3 YEAR WARRANTY
This knife is covered by Work Sharp’s 3-year warranty. We stand behind and support our products – contact us if you need assistance, parts, or service.
Warranty for consumer not industrial or commercial use.
Register your warranty online at
WorkSharpTools.com.
WORK SHARP®
PO Box 730
210 E. Hersey St.
Ashland, OR 97520 USA
QUESTIONS?
WorkSharpTools.com / 1.800.418.1439
PLEASE LEAVE A REVIEW WHERE YOU PURCHASED YOUR PRODUCT
WSFBK PP0005718 REV 0 01/24
Documents / Resources
| WORK
SHARP Mod Tools Fixed Blade with
Sharpener
[pdf] Instruction Manual
Mod Tools Fixed Blade with Sharpener
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>