GIGASTONE GA-9700 15Watt Fast Charger User Guide
- August 29, 2024
- Gigastone
Table of Contents
GA-9700 15Watt Fast Charger User Guide
About GA-9700
Package Contents
Specification
| Input | 5V=2A, 9V=2A,12V=1.5A |
|---|---|
| Output | 5V=1A-1.5A, 9V=1.67A, 12V=1.25A (Max 15Watt) |
| Transmission distance | C7mm |
| Conversion rate | 75% |
| Product Size | 100x100x1Omm |
Instructions
- Power supply for GA-9700 through the adapter or computer.
- Without any device placed, the connected GA-9700 will be green light when standby.
- When placing the device on the GA-9700, it will start to charge automatically. The GA-9700 will be blue light when charging and indicate the charging status in the form of breathing light.
- Use fast charge supported (Output: 9V) charger to charge GA-9700.
Cautions
- Do NOT touch the device with wet hands.
- Do NOT crash or collaps the charger or device.
- Use the device at temperature range 0-45 °C. It could damage the device if using or keeping it out of the suggested operating range.
- Keep the device away from the fans, liquids, dust and conducting materials (ex: metal powder and pencil leads).
- Do NOT let children and animals keep the device in their mouth.
- Do NOT take apart, remodel or repair the device.
- Keep the device away from any magnetic stripe cards including credit cards, telephone cards, bankbooks and boarding pass that the magnetic field could damage the device.
FCC Warning
This device complies with part 15 of the FCC Rules, Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation, Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment, This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules, These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna,
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>