Gigastone GA-9700 Qi Compatible 15-Watt Fast Charge User Guide
- June 4, 2024
- Gigastone
Table of Contents
Gigastone GA-9700 Qi Compatible 15-Watt Fast Charge User Guide
Package Contents
Appearance
Specification
| Input | 5V 2A, 9V 2A, 12V 1.5A |
|---|---|
| Output | 5V 1A-1.5A, 9V 1.67A, |
12V 1.25A (Max 15Watt)
Transmission distance| ≤7mm
Conversion rate| 75%
Product Size| 100x100x1Omm
Instructions
- Power supply for GA-9700 through the adapter or computer.
- Without any device placed, the connected GA-9700 will be green light when standby.
- When placing the device on the GA-9700, it will start to charge automatically. The GA-9700 will be blue light when charging and indicate the charging status in the form of breathing light.
- Use fast charge supported (Output: 9V) charger to charge GA-9700.
Cautions
- Do NOT touch the device with wet hands.
- Do NOT crash or collaps the charger or device.
- Use the device at temperature range 0-45 °C. It could damage the device if using or keeping it out of the suggested operating range.
- Keep the device away from the fans, liquids, dust and conducting materials (ex: metal powder and pencil leads).
- Do NOT let children and animals keep the device in their mouth.
- Do NOT take apart, remodel or repair the device.
- Keep the device away from any magnetic stripe cards including credit cards, telephone cards, bankbooks and boarding pass that the magnetic field could damage the device.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance between 20cm the
radiator your body.