GIGASTONE KMH-9550 Bluetooth Karaoke Microphone User Guide

GIGASTONE KMH-9550 Bluetooth Karaoke Microphone User Guide

Product Introduction

A. micro SD card (up to 128GB) microSD
B. USB-C Port (recording & charging)
C. headphone port

1. Power Button
   • Long press: Power on/off
   • Short press once: Music start/off
   • TWS Pairing Button
2. “+” button
   • Short press once: Volume up
   • Long press: Next song
3. “_” button
   • Short press once : Volume down
   • Long press: Back to previous song
4. Function Switch
   • Short press to switch to microphone volume, music volume and key adjustment, then use +- button to adjust level
5. Voice change/cut
   • Short press to switch to man or woman
   • Long press to activate vocal cut

Package Contents

• Karaoke Microphone
• Charging Cable
• Audio Cable
• User Manual

Features

• Independently developed 8-stage music key adjustment function (original key, raise key +1 +4, lower key -1–3) – Stable connection and low-latency with Bluetooth 5.0
• TWS function, two microphones can be connected at the same time, support duet singing
• 2 voice change function (man and woman)
• Vocal cut function
• Equipped with one audio jack port and one type-c input port for charging
• Support micro SD card up to 128GB
• Eight levels adjustment for echo effect, singing volume and music volume
• Friendly LED display screen

Product Function Instruction

1. Power On/Off: Press and hold the power button for three seconds. When powering on, the power button indicator will flash.

2. Bluetooth Connection: Turn on Bluetooth on the phone and go to phone’s Bluetooth menu and search for “KMH-9550” to pair with Bluetooth. Once connected successfully, you will hear a prompt sound, and the power button indicator will change from flashing to solid. After the Bluetooth microphone is successfully paired with the phone, it will automatically connect in future use. To disconnect the Bluetooth, please disconnect it from the Bluetooth menu on the phone.

3. Start Singing. During singing, you can control the start/pause and next/previous track functions from your phone, or you can use the buttons on the microphone to execute these functions.

4. TWS Pairing
   Step 1: Power on both microphones that will be used for TWS pairing.
   Step 2 : Double-click the power button of one microphone to initiate TWS pairing. At the beginning of the pairing process, the power button light of the microphone will keep flashing.
   Step 3: After the two microphones are successfully paired in TWS mode, you will hear a prompt sound, and the power button indicator will change from flashing to solid.
   Step 4: After TWS pairing is successful, open the Bluetooth menu on your phone and search for the device name “KMH-9550” to complete the Bluetooth connection with the phone.

5. Key Adjustment: During singing, you can adjust the key of the song with the up/down button.

6. Echo Adjustment: During singing, you can adjust the echo of the voice with the up/down button.

7. Voice Change Adjustment: Use the voice change button to change the voice between male, female & original voice. The product defaults to the original sound when powered on.

8. Vocal Cut: The vocal cut function reduces the original vocal in the original video/audio file.

9. Mobile Phone Recording:
   Step 1 : Use a “Type-C to Type-C” or “Type-C to Lightning” recording cable with data transfer capability. Connect one end of the cable to the Type-C interface of the microphone and the other end (Type-C or Lightning) to the corresponding port on your phone. When the headphone icon appears on your phone, the connection is successful.
   Step 2: Open a recording app on your phone, such as “Sing! Karaoke” or any other recording app. Choose your favorite song and start recording.
   Step 3: After recording, press the save button. You can then replay the recording to listen to what you recorded.

10. (10) Playing Music Using the Connection Cable: Use a ‘Type-C to Type-C” or ‘Type-C to Lightning” cable with data transfer capability. Connect one end of the cable to the Type-C interface of the microphone and the other end (Type-C or Lightning) to the corresponding port on your phone. When the headphone icon appears on your phone, the connection is successful. You can then choose your favorite song to play. During use, you cannot control the volume, next/previous track, or play/pause functions through the microphone. You can only control them through the connected phone or other devices.

11. Playing Music from a Memory Card: In Bluetooth connection mode: Insert a memory card into the Micro SD slot. The microphone will prioritize playing MP3 music from the memory card. You can use the microphone’s power button to switch between play, pause, skip next or previous song. If you exit the memory card mode, the microphone will return to the Bluetooth connection mode. Please note, When a memory card is inserted, Bluetooth search and connection are not available.

12. Charging using the Type-C Port: When charging, please use a USB-A to USB-C charging cable and a charger that complies with safety regulations (please use a charger below 20 watts) to avoid damaging the Bluetooth microphone.

13. When using the Bluetooth microphone as a speaker to listen to music, you can first adjust the microphone volume to the minimum and then increase it according to your needs.

Trouble Shooting

volume of microphone.
No echo effect| Echo effect is small| Please raise up the echo effect.
Failure with wed recording|

1. microphone didn’t receive the sounds.
2. The cable used is without OTG tunctiont Please be noted that the apple original Lightning to Type C-cable is without OTG function.)

|

1. Please keep the microphone at correct site when singing.
2. Change a cable with 07G function.

Noise when singing| The Bluetooth signal is too weak.| Keep the microphone and mobile phone near within 5 meter so that the Bluetooth signal stronger.
Music interruption under the Bluetooth connection| The microphone is too far from the mobile phone.| Move the microphone closer to the mobile phone and ovoid the obstacle.
Failure of Bluetooth connection|

1. Bluetooth distance is too far between the microphone and a mobile phone.
2. Microphone is Bluetooth connected with other mobile phone.
3. Micro SD cord is in the microphone already.

|

1. Move the microphone closer to the mobile phone and avoid the obstacle.
2. Disconnect the Bluetooth between microphone and other mobile phone.
3. Take off the SD card from microphone.

music volume is too small|

1. The volume of mobile phone is low
2. Music file has low sound volume
3. Microphone music is low.

|

1. Raise volume of mobile phone.
2. Dow nload music file with clear sound.
3. Raise volume of the microphone music.

High pitched squeals Occur| The microphone is too close with magnetic material, such as microphone speaker.| Since the microphone itself or the mobile phone contain magnetic substances, when setting up TWS function, please keep the two microphones standing upright and the microphone should not be too close to the speaker.
Vocal in the music is weak| Vocal cut function is on.| Turn off the vocal cut function.

Specifications

Warning

1. Read user manual carefully before using KMH-9550.
2. Please do not dispose the product in fire or liquid. And do not disassemble or modify KMH-9550.
3. Do not knock or crash the product. Keep KMH-9550 dry and away from damp and erosive goods.

Warranty Information

1. For any defect, in the judgement of our technician, caused under normal use, we are responsible for repairing for free of charges 12 months commencing from the date of purchase at the discretion of our company.
2. A valid warranty voucher or any original purchase invoice must be presented upon request for warranty service.
3. During warranty period, this warranty shall not apply to the product if (a) it has explicitly modified or repaired in any way by any person other than technicians of our company, or (b) it has been damaged through misuse, malicious acts, negligence, and flow in any liquid, accident or natural calamities.
4. All conditions refer to the English version.
5. If any damage causes to your product due to wrong usage, our company will not take any responsibilities.

Limited Warranty

Thank you for purchasing Gigaton KMH-9550. Gigatons warrants that the product is free of defects in workmanship and material at the time of its original purchase. This original warranty card and original invoice must be presented at the time you require warranty service or such warranty will be voided. This limited warranty is valid only if the products is used for the purpose for which it was designed. It does not apply to damage or loss caused by negligence, physical abuse ,misuse, accident, exposure to moisture, dampness, extreme thermal, unauthorized, modifications, unauthorized opening or repair, forces of nature, or other actions beyond the reasonable control of Gigaton. In case of when the warranty does not apply, a repair of replacement charge will be incurred. The customer shall be responsible for sending the defective product to the service center and get back the repaired or replaced product from the service center.

Note: Gigaton reserves the right to interpret the terms and conditions contained herein, and the right for any charges without prior notice.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
  Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Los Angeles

Address: 17520 Von Karman Ave, Irvine, CA 92614
Tel: +1-949-450-2900
E-mail: [email protected]
Website: www.gigastone.com

©2023 Gigaton Corporation
All rights reserved. All registered logos and trademarks are the property of their respective owners.

California Residents

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>