LA CROSSE 308-1414Bv3,308-1414Wv3 Wireless Color Weather Station User Guide

LA CROSSE 308-1414Bv3,308-1414Wv3 Wireless Color Weather Station

Specifications :

• Transmission Range: Up to 330 feet (100 meters) in open air
• Frequency: RF 433MHz
• Update Interval: About every 51 seconds
• Battery Life: Over 24 months
• Dimensions: 1.58 inches L x 0.83 inches W x 5.08 inches H (3.99cm L x 2.1cm W x 12.99cm H)

Product Usage Instructions

Power Up :

1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert the 5-volt power cord into the outlet, then into your Weather Station. Optionally, insert 3-AAA batteries for backup.
3. Place the Outdoor Sensor in a shaded outdoor location to protect it from direct sunlight.

Atomic Time :

1. Hold the TIME SET button until the display changes to enter the Settings Menu.
2. Use the ARROW buttons to adjust values.
3. Press the TIME SET button to confirm and move to the next item.

Adjustable Backlight:
The Weather Station features an adjustable backlight for better visibility in different lighting conditions.

Temperature Alerts :

1. Hold the ALERTS button to enter the Alert Settings.
2. Use the ARROW buttons to adjust values.
3. Press the ALERTS button to confirm and exit.

Sensor Search :
If outdoor readings show dashes, perform a full restart by bringing the sensor inside, removing batteries and power cords, pressing any display button multiple times, waiting, and then reinstalling batteries and power.

Care & Maintenance:

• Ensure proper battery replacement following instructions to avoid personal injury.
• Dispose of batteries responsibly – check local recycling centers or regulations for proper disposal methods.

FAQ :

• Q: What should I do if my outdoor readings show dashes?
  A: Perform a full restart by following the provided instructions to establish a strong connection between the sensor and the Weather Station.

• Q: How often does the Weather Station update its data?
  A: The Weather Station updates data approximately every 51 seconds to provide you with accurate and up-to-date information.

• Q: Can I use rechargeable batteries with the Weather Station?
  A: It is recommended to use non-rechargeable AA batteries for optimal performance and battery life.

WIRELESS COLOR WEATHER STATION

SET UP GUIDE
MODEL: 308-1414Bv3 / 308-1414Wv3

Power Up

1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert the 5 volt power cord into the outlet, then into your Weather Station. Optional: Insert 3-AAA batteries for backup.
3.  Once the Outdoor Sensor is reading to your station, place it outside in a shaded location to protect from the sun’s heat.

Watch the sensor mounting video: bit.ly/th_sensor_mounting

Atomic Time

• Your station will automatically search for the Atomic Time Signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• Press the TIME SET button to manually start or stop a search for the WWVB Atomic Time Signal.
• The Tower Icon will flash while searching, and remain solid on screen when the WWVB Signal is received.
• For information about WWVB Atomic Time visit: bit.ly/atomic_time.

Settings Menu

1. Hold the TIME SET button until the display changes to enter the Settings Menu.
2. Press and release the ARROW buttons to adjust values.
3.  Press the TIME SET button to confirm and move to next item.

Settings Menu Order:

• WWVB ON/OFF
• Time Zone
• DST ON/OFF
• 12/24 Hour
• Hour
• Minutes
• Year
• Month
• Date
• Fahrenheit or Celsius

Time Zones

• AST = Atlantic
• EST = Eastern
• CST = Central
• MST = Mountain
• PST = Pacific
• AKT = Alaska
• HAT = Hawaii

WWVB OFF: When WWVB OFF is selected, you will move directly to 12/24 Hour setting.
Weekday: The Weekday will set automatically when your Year, Month and Date are set.

Adjustable Backlight

Press and release the SNOOZE/LIGHT HI/LOW/OFF button to adjust the backlight brightness: High • Low •
Forecast Icons

• The Forecast Icons are determined by the station’s barometric pressure reading. Please allow 7-10 days for barometric calibration.
• This is your pressure at your stations’ location and may vary slightly from your local reporting station.
• Six forecast icons use changing atmospheric pressure to predict weather conditions for the next 12-hours with 70-75% accuracy.
• When Outdoor temperature is below 32˚F and the forecast is rain or
• T- storm, the station will display Snow.
• Note : at elevations above 6, 200 feet the forecast icons may not change.

Forecast Tendancy Arrows
The Forecast Tendency Arrows tell you at a glance if the pressure is rising, falling or steady. Rising pressure indicates the weather will improve. Falling pressure indicates the weather will worsen.

Temperature Alerts

1. Hold the ALERTS button until the display changes to enter the Alert Settings.
2. Press and release the ARROW buttons to adjust values.
3.  Press the ALERTS button to confirm and exit.
   • When an alert value is reached, the station will beep 5 times every minute, until the value is out of the alert range.
   •  Press any button to stop the alert from sounding.
   • The flashing Alert Icon will indicate if it is a LO or HI alert.

Arm/Disarm Alerts
Press the ALERTS button to toggle between alerts: Outdoor HI / Outdoor LOW / Indoor HI / Indoor LOW

• Press and release the UP ARROW button to arm the alert.
• Alert Icon will show.
• Press and release the DOWN ARROW button to disarm the alert.

MIN/MAX Records
The station automatically resets minimum and maximum values daily at midnight (12:00 AM).

• Press and release the DOWN ARROW button to view minimum values.
• Hold the DOWN ARROW button to reset minimum values.
• Press and release the UP ARROW button to view maximum values.
• Hold the UP ARROW button to reset maximum values.

Heat Index & Dew Point

• Press and release the HEAT/DEW button once to view Heat Index.
•  Press and release the HEAT/DEW button again to view Dew Point.

Trend Arrows

• The UP and DOWN arrows indicate changes in temperature and humidity over the past 3 hours. The STEADY arrow indicates no change in the past 3 hours.
• The arrows will update every 30 minutes and compare data from exactly 3 hours prior.
• Temperature: Arrow will change with every 2 degrees Fahrenheit.
• Humidity: Arrow will change with every 3% RH

Low Battery Indicator

• Low Battery by the Indoor Temperature, replace batteries in the station.
• Low Battery by the Outdoor Temperature, replace sensor batteries

Sensor Search

• If you are seeing dashes in place of outdoor temperature, first check your sensor batteries. Hold the HEAT/DEW button for to search for the sensor.
• The Reception Icon  will flash while searching and be solid when sensor signal is received.

If your outdoor readings continue to show dashes, complete a full restart:

1. Bring your sensor inside next to your station.
2. Remove the batteries and power cord from the station and sensor.
3. Press any button on the display at least 20 times, and wait 15 minutes with the
4.  After 15 minutes, install new batteries into your sensor, and then power back up the station with the power cord and batteries.
5. Wait another 15 minutes to establish a strong connection. Place the sensor outside in a shaded location.

Sensor Shield (not included)

• The Sensor Weather Shield is designed to protect your outdoor sensor from rain and snow.
• This shield will offer limited protection from the sun’s heat.
• Optional purchase at: bit.ly/925-1418

Care & Maintenance

Battery Replacement Instructions

• When batteries of different brand or type are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference of voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.
• Do not mix Alkaline, Lithium, Standard, or Rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable for the intended use.
•  Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove batteries from product during periods of non-use. Battery leakage can cause corrosion and damage to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect the environment, please check the internet or your local phone directory for local recycling centers and/or follow local government regulations.

Specifications

• 308-1414Bv3 / 308-1414Wv3

• Temperature Range: 32°F to 122°F (0°C to 50°C)

• Power: 5-volt power adapter included GPU280500150WA00

• Optional: 3-AAA batteries (not included)

• The plug on the power adapter is intended to serve as the disconnect device, the socket-outlet shall be installed near the equipment and shall be easily accessible.

• Battery Life: Over 36 months

• Dimensions: 8.36” L x 2.24” W x 5.49” H (21.22cm L x 5.68cm W x 13.94cm H)

• Outdoor Sensor (TX141TH-Bv4)

• Temperature Range: -40°F to 140°F (-40°C to 60°C)

• Humidity Range: 10% – 99% RH

• Transmission Range: Over 330 feet

• (100 meters) in open air RF 433MHz

• Update Interval: About every 51 seconds

• Power: 2-AA, LR6 batteries (not included)

• Battery Life: Over 24 months

• Dimensions: 1.58” L x 0.83” W x 5.08” H (3.99cm L x 2.1cm W x 12.99 H cm) 

• Designed in La Crosse, Wisconsin Made in China Printed in China DC 060824

• Stay in Touch!
  Ask questions, watch set up videos, and provide feedback on our social media outlets. Follow La Crosse Technology on Youtube, Facebook, Instagram, and X (Twitter).

• We’re Here to Help

• If you require additional assistance, get in touch with our friendly customer support team based in La Crosse, WI.

• Self Help: bit.ly/308-1414bv3_support or bit.ly/308-1414wv3_support

• Online: bit.ly/contact_techsupport

• Phone: 1.608.782.1610

• Our knowledgeable customer support team is available: Mon-Fri 8am-6pm CST

• Scan for 308-1414Bv3

Scan for 308-1414Wv3

Warranty & Patent Info

La Crosse Technology Ltd. provides a 1-year limited time warranty on this product relating to manufacturing defects in materials & workmanship. In accordance with the Song-Beverly Act, in the state of California, the warranty on this item becomes effective on the date of delivery. La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty
Patents: www.lacrossetechnology.com/pages/patents
California Residents

WARNING : This product can expose you to chemicals including acrylonitrile, 1, 3-butadiene, and styrene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized.

DOUBLE YOUR WARRANTY
Scan the QR Code or visit:
bit.ly/308-1414bv3_register or bit.ly/308-1414wv3_register to register your product and double the standard 1-year warranty for free by opting to recieve occasional product emails.

References

• Submit a request – La Crosse Technology
• YouTube
• Patents – La Crosse Technology
• Warranty – La Crosse Technology
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>