La Crosse Technology W72432 Mini Digital Alarm Clock with Timer and Magnetic Back Instruction Manual

La Crosse Technology W72432 Mini Digital Alarm Clock with Timer and

Magnetic Back

Specifications

• Power Requirements: 1 AAA LR3 Alkaline Battery (not included)
• Battery Life: Over 12 months with reputable battery
• Dimensions: 3.30 L x 0.90 W x 1.49 H (8.39cm L x 2.42cm W x 3.79cm H)

Product Usage Instructions

Power Up

1. Insert 1 AAA battery into your Clock.
2. Enter the Settings Menu to adjust the Time settings.
3. Position on a wall, cabinet, or desktop.

Settings Menu
Important: Press and release or hold than release one button at a time when setting your clock.

1. Hold the button to enter the Settings Menu.
2. Press the button to adjust the flashing values. Hold to adjust quickly.
3. Press the button to confirm adjustments and move to the next item or exit.

Custom Display Modes
Press and release the button to toggle through Time, Alarm Time, and Stopwatch modes. Your clock will stay on the selection.

Stopwatch

1. Press and release the button until Stopwatch shows.
2. Press and release the button to start or stop the stopwatch counting.
3. Hold the button to reset the stopwatch to zero.

Low Battery Indicator
When the Battery Indicator shows above the seconds, replace the clock’s battery.

Time Alarm

1. Press the button so Alarm Time shows. There will be an AL in the lower right corner.
2. Hold the button to enter the Alarm Settings Menu.
3. Press the button to adjust the flashing values. Hold to adjust quickly.
4. Press the button to confirm adjustments and move to the next item or exit.

Frequently Asked Questions (FAQ)

1. How do I activate/deactivate the alarm?
   To activate or deactivate the alarm, press the button so Alarm Time shows. Press the button to activate or deactivate the alarm.

2. How do I stop a sounding alarm?
   To stop a sounding alarm for 24 hours, press any button. If no buttons are pressed, the alarm sound will turn off automatically after 2 minutes.

POWER UP

1. Insert 1 “AAA” battery into your Clock.
2. Enter the Settings Menu to adjust the Time settings.
3. Position on a wall, cabinet, or desktop.

SETTINGS MENU

Important: Press and release or hold than release one button at a time when setting your clock.

1. Hold the button to enter the Settings Menu.
2. Press the + button to adjust the flashing values. Hold to adjust quickly.
3. Press the button to confirm adjustments and move to the next item or exit.

Settings Menu Order:
12/24 Format • Hour • Minutes • Seconds

CUSTOM DISPLAY MODES

Press and release the button to toggle through Time, Alarm Time, and Stopwatch modes. Your clock will stay on the selection.

STOPWATCH

The Stopwatch will count up from 0 to 9 hours, 59 minutes, and 59 seconds.

1. Press and release the button until Stopwatch shows.
2. Press and release the button to start or stop the stopwatch counting.
3. Hold the button to reset the stopwatch to zero.

LOW BATTERY INDICATOR
When the Battery Indicator shows above the seconds, replace  the clock’s battery.

TIME ALARM

1. Press the button so Alarm Time shows. There will be an “AL” in the lower right corner.
2. Hold the button to enter the Alarm Settings Menu.
3. Press the + button to adjust the flashing values. Hold to adjust quickly.
4. Press the button to confirm adjustments and move to the next item or exit.

Note: Alarm will be active when set.

Activate/Deactivate Alarm:

1. Press the button so Alarm Time shows.
2. Press the + button to activate or deactivate the alarm. The Alarm Icon will show when alarm is active.
3. Press the button to return to time, or stopwatch display.

Note: Press any button to stop a sounding alarm for 24 hours. If no buttons are pressed, the alarm sound will turn off automatically after 2 minutes.

SPECIFICATIONS

• Power Requirements: 1 “AAA” LR3 Alkaline Battery (not included)
• Battery Life: Over 12 months with reputable battery
• Dimensions: 3.30” L x 0.90” W x 1.49” H (8.39cm L x 2.42cm W x 3.79cm H)

WE’RE HERE TO HELP!
If you require additional support, get in touch with our friendly customer support team based in La Crosse, WI. Our associates are available Mon-Fri: 8am-6pm CST.
Email: bit.ly/contact_techsupport
Self-Help: bit.ly/w72432_support
Phone: 1.608.782.1610

JOIN THE CONVERSATION
Ask questions, watch setup videos, and provide feedback on our social media outlets. Follow La Crosse Technology on Facebook, Instagram, YouTube and Twitter.

WARNING: This product can expose you to chemicals including acrylonitrile, 1, 3-butadiene, and styrene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov

WARRANTY INFO
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship.
La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty
Patents: www.lacrossetechnology.com/pages/patents

CARE + MAINTENANCE

Battery replacement instruction:
When batteries of different brand or type are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference of voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.

• Always purchase the correct size and grade of battery suitable for the intended use.
• Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types.
• Clean the battery contacts and those of the device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove batteries from product during periods of non-use. Battery leakage can cause corrosion and damage to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect the environment please check the internet or your local phone directory for local recycling centers and / or follow local government regulations.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized.

References

• x.com
• La Crosse Technology (@lacrossetechnology) • Instagram photos and videos
• YouTube
• Patents – La Crosse Technology
• Warranty – La Crosse Technology
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>