LA CROSSE 433-3267MVT Wall Clock User Manual
- June 1, 2024
- La Crosse
Table of Contents
LA CROSSE 433-3267MVT Wall Clock
REMOVE COVER FROM MOVEMENT
- Open: Pull up on the square cover to access the battery compartment.
- Close: Replace the cover over the movement and press down.
POWER UP
- Insert 1 fresh AA alkaline battery, according to polarity, into the Battery Compartment.
- Rotate the Time Set Wheel to set the time.
- Mount on a wall and enjoy!
Learn more from our video: bit.ly/wallclock_setup
- Note: The quartz movement will keep the clock running accurately.
- If the clock does not operate or steadily loses time, replace the battery.
MOUNTING
- Be sure the Cover is in the closed position.
- Use the top Hanger Hole to mount the clock.
THERMOMETER
- Your thermometer has been pre-calibrated and should not need adjustment.
- Before manually adjusting your sensor, allow the clock to sit for at least 2 hours in the same location.
- To manually adjust your sensor, gently turn the temperature sensor adjustment on the back of the clock until the desired setting is reached.
STAY IN TOUCH!
- Ask questions, watch set-up videos, and provide feedback on our social media outlets.
- Follow La Crosse Technology on YouTube, Facebook, Instagram, and X (Twitter).
SPECIFICATIONS
- Battery Requirements: 1 AA (IEC, LR6, 1.5V) required in the Movement (Alkaline recommended)
- Battery Life: 12+ months
- Temperature Range: -20ºF to 120ºF
- Dimensions: 26.2 in x 2.56 in (66.5cm x 6.5cm)
- Movement: Step
- Lens: Glass
WARRANTY & SUPPORT
- This product is warranted to be free from defects in material and workmanship under normal use and service for two years from the date of sale to the customer.
- Warranty will not apply to defects resulting from abuse, accidents, or misuse. If a defect that is covered by this warranty arises during the warranty period, promptly return the clock (postage prepaid) with proof of purchase showing the date the clock was purchased to the following address and such defects will be repaired, or the products will be replaced at La Crosse Clock Company option without charge.
- La Crosse Clock Company Warranty Department, 2830 South 26th Street.
- La Crosse, WI 54601
- For Online support visit: www.lacrossetechnology.com/support
- Patents: www.lacrossetechnology.com/pages/patents
CARE & MAINTENANCE
When batteries of different brands or types are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference in voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.
- Always purchase the correct size and grade of battery most suitable for the intended use.
- Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types.
- Clean the battery contacts and also those of the device before battery installation.
- Ensure the batteries are installed correctly concerning polarity (+ and -).
- Remove batteries from the product during periods of non-use.
- Battery leakage can cause corrosion and damage to this product.
- Remove used batteries promptly.
- For recycling and disposal of batteries, and to protect the environment, please check the internet or your local phone directory for local recycling centres and/or follow local government regulations.
WARNING: This product can expose you to chemicals including acrylonitrile, 1, 3-butadiene, and styrene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Read User Manual Online (PDF format)
Loading......