LA CROSSE TECHNOLOGY 513-1417CHv2 Atomic Digital Wall Clock Instruction Manual

: May 15, 2024
: LA CROSSE TECHNOLOGY

Table of Contents

POWER UP
SETTINGS MENU
TIME ALARM
MOON PHASE
HI / LO TEMPERATURE
TEMPERATURE TREND ARROWS
SEARCH FOR OUTDOOR SENSOR
LOW BATTERY INDICATOR
SPECIFICATIONS
DOUBLE YOUR WARRANTY
Documents / Resources

Atomic Digital Wall Clock SET UP GUIDE
MODEL: 513-1417CHv2

POWER UP

Insert 2-AA batteries into your Outdoor Sensor.
Insert 2-AA batteries Into your Clock.
Enter the Settings Menu to adjust your time and date.
Once the sensor is reading to your clock, place the sensor outside in a shaded location. View our sensor mounting video here: bit.ly/th_sensor_mounting

Atomic Time Signal

The clock will search for the Atomic Time Signal at power up and at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
The Atomic Time Signal Icon will flash while searching and be solid when it has connected.
From the normal time display, press the SET button to manually start or stop a search for the WWVB time signal. For information about WWVB visit: bit.ly/atomic_time.

Hold the SET button until the display changes to enter the Settings Menu. Press and release the + or – buttons to adjust values. Hold to adjust quickly.
Press and release the SET button to confirm values and move to the next setting.
Press and releas the SNOOZE button at any time to exit.

Settings Menu Order:

• Language English | Spanish
• Beep ON | OFF
• Atomic ON | OFF
• DST ON | OFF (Daylight Saving Time)
• Time Zone
• Hour
• Minutes
• Year
• Month
• Date
• Fahrenheit | Celsius| TIME ZONES
Atlantic: ZONE-AST
Eastern: ZONE-EST
Central: ZONE-CST
Mountain: ZONE- MST
Pacific: ZONE-PST
Alaska: ZONE-AKT
Hawaii: ZONE-HAT
---|---

Language: Whichever language is selected, the following instructions and weekday will be presented in that language.
Weekday: Your weekday display will adjust automatically once you have your Year, Month, and Date settings set correctly.

TIME ALARM

Set Alarm:

Hold the ALARM button to enter alarm setting mode. ALARM will show and the hour will flash. Press and release the + or – buttons to choose the hour.
Press and release the ALARM to confirm and move to the minutes. The minutes will flash. Press and release the + or – buttons to choose the minutes.
Press and release the ALARM button to confirm and exit.
Press and release the SNOOZE button at any time to exit.

Silence a Sounding Alarm: Press any button except SNOOZE to silence the alarm for 24 hours.
Activate/Deactivate Alarm:

Press and release the ALARM button to view the Alarm Time. Press and release again to activate or deactivate the alarm.
The Alarm Icon will show when alarm is active.

Snooze: When the alarm is active, press the SNOOZE button to silence the alarm for 10 minutes. The alarm Icon will flash while snoozing.
Note: The alarm will sound with increasing frequency for two minutes, then shut off automatically if not silenced.

MOON PHASE

The moon phase is based on the Lunar Calendar and the year, month, and date settings.

HI / LO TEMPERATURE

High and Low Temperature Records will automatically reset daily at midnight.

Press and release the + (PLUS) button once to view High Indoor and Outdoor Temperatures.
Press and release the + (PLUS) button twice to view Low Indoor and Outdoor Temperatures.
Press again to return to normal time display.

Manually Reset Records:

Hold the + (PLUS) button to manuall reset the High and Low records.

TEMPERATURE TREND ARROWS

Both the Indoor and Outdoor Temperature values have Trend Arrows to indicate changes (1°C / 2°F or more) over the past three hour period.

| Temperature has risen over the past three hours.
---|---
| Temperature has been steady over the past three hours.
| Temperature has fallen over the past three hours.

SEARCH FOR OUTDOOR SENSOR

If you are seeing NO for your outdoor readings, please try the following steps:

Hold the – (MINUS) button to search for your outdoor sensor. The Reception Indicator will begin to animate.
If after 3 minutes the sensor still isn’t connected, bring the sensor inside next to the display and remove power from both the sensor and clock.
Press any button on the clock 20 times and leave the parts sit for a few moments with the power off.
Install a new set of alkaline batteries into the sensor, then into your clock. For additional help visit: bit.ly/basic_restart

LOW BATTERY INDICATOR

Low Battery Icon by Outdoor Temperature, replace batteries in the Outdoor Sensor.
Low Battery Icon by the Time, replace batteries in the Clock.

We’re Here to Help
If you require additional assistance, get in touch with our friendly customer support team based in La Crosse, WI.
Self Help:bit.ly/513-1417chv2_support
Online:bit.ly/contact_techsupport
Phone: 1.608.782.1610
Our knowledgable customer support team is available:
Mon-Fri 8am-6pm CST
SCAN HERE Additional Info and Support

https://bit.ly/513-1417chv2_support

Stay in Touch!
Ask questions, watch setup videos, and provide feedback on our social media outlets. Follow La Crosse Technology on YouTube, Twitter, Facebook and Instagram. CA WARNING:
This product can expose you to chemicals including acrylonitrile, butadiene, and styrene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

SPECIFICATIONS

Atomic Clock (513-1417v2)

Temperature Range: 32°F to 122°F (0°C to 50°C)
Update Interval: About every 51 seconds
Power: 2-AA, IEC, LR6 batteries (not included)
Battery Life: Over 12 months

Outdoor Sensor (TX141-B (all versions))

Temperature Range: -40°F to 140°F (-40°C to 60°C)
Transmission Range: Over 330 ft. open air
(100 meters) RF 433MHz
Update Interval: About every 51 seconds
Power: 2-AA, IEC, LR6 batteries (not included)
Battery Life: Over 12 months

DOUBLE YOUR WARRANTY

Scan Here
Scan the QR Code or visit: bit.ly/513-1417chv2_registerz to register your product and double the standard 1-year warranty for free by opting to recieve occasional product emails.

https://bit.ly/513-1417chv2_register

Documents / Resources

| LA CROSSE TECHNOLOGY 513-1417CHv2 Atomic Digital Wall Clock [pdf] Instruction Manual
513-1417CHv2 Atomic Digital Wall Clock, 513-1417CHv2, Atomic Digital Wall Clock, Digital Wall Clock, Wall Clock
---|---