QualSights QS-PS Data Broadcasting Device Instruction Manual

QualSights QS-PS Data Broadcasting Device

and accelerometer inside, mostly helps users in different industries to realize asset or inventory tracking. Also, it is easy for users to wear or carry due to its

portable design.

INTRODUCTION

QS-PS with the built-in accelerometer can detect if an object (QS-PS attached) is moving or falling. It can be used for asset tracking, activity monitoring, inventory tracking, etc., in different industries.
The user can configure the E8S tag beacon via configuration app BeaconSET+ as well.

FEATURE

• Advertise iBeacon & Eddystone & Sensor data
• Bluetooth® 5.0 chipset nRF52 series
• Low power consumption 3-axis accelerometer
• Included 1pc CR series coin battery replaceable
• The max.60 meters advertising distance
• Compact housing with a key-chainhole

APPLICATION

• Asset tracking
• Activity monitoring
• Inventory tracking

ACCESSORY

• Double-sided adhesive

ACTIVATE E8S

• Takeout the plastic battery sheet from QS-PS to activate device;

CONFIGURATION TOOL

• BeaconSET+ (iOS & Android)

ELECTRONIC PARAMETER

PARAMETER SETTING

Each QS-PS data broadcasting device has been pre-configured in the factory before the shipment. Here below is given the main parameters and default settings.

iBeacon

| UUID (16 bytes)| E2C56DB5-DFFB-48D2-B060-D0F5A71096E0 (Proximity)
Major (2 bytes)| 0
Minor (2 bytes)| 0
Measured Power| -59dBm9（0xC5)
Tx Power| 0dBm
Interval(ms)| 900ms

UID

| Instance ID| Random
Namespace ID| Random
Measured Power| -24dBm
Tx Power| 0dBm
Interval(ms)| 2000ms

URL

| URL| http://www.minew.com
Measured Power| -24dBm
Tx Power| 0dBm
Interval(ms)| 2000ms

TLM

| Electricity mV| By default
Boot time| By default
PDU packets| By default
Measured power| -24dBm
Tx power| 0dBm
Interval(ms)| 4000ms
INFO| Device name| QS-PS
Electricity| By default
 | MAC address| Factory setting
---|---|---
Measured power| -24dBm
Tx power| -8dBm
Interval(ms)| 4000ms

ACC

| X-axis| 1.  It depends on beacon’s real status, static or movement

2.  Only working when beacon with accelerometer sensor

Y-axis
Z-axis
Measured Power| -24dBm
Tx power| 0dBm
Interval(ms)| 4000ms

COMPATIBILITY

Supporting device &system| ****

Module of Supporting device

---|---
BLE| BLE4.2 and above
iOS7.0 and above| iPhone4S, iPhone5/5C/5S

iPhone6/6Plus/6S/6SPlus,iPhone7/7Plus iPad mini/mini2/4/Air/pro, etc.

Android4.3 and above| Samsung

Xiaomi ,Huawei ,OnePlus, Vivo, OPPO, etc.

PACKING INFORMATION

Details| Inner Box(Battery included)| Outer Box(Battery included)
---|---|---
Quantity(QS-PS)| 80pcs / box| 800pcs / carton
Net Weight| 520g| 5.2Kg
Gross Weight| 750g| 8Kg
Size| 30.5 x 11 x 7.2 cm| 32 x 23.5 x 40 cm

FCC STATEMENT

WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement.

The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>