Hoover 31020070 Washing Machine Instructions

Instructions Washing Machine

31020070 Washing Machine

Thank you for choosing this product.
We are proud to offer the ideal product for you and the best complete range of home appliances for your daily routine.
Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance.
Only use the washing machine after carefully reading these instructions. We recommend you always keep this manual on hand and in good condition for any future owners.
FOR U.K. ONLY
On receipt of your appliance please check it carefully for damage. Any damage found must be reported to the delivery driver immediately.
Alternatively damage found must be reported to the retailer within 2 days of receipt.
Each product is identified by a unique 16character code, also called the “serial number”, printed on the sticker. This can be found inside the door opening. This code is a unique code for your product that you will need to register the product warranty, or if you need to contact the Customer Service Centre.

Environmental conditions
**** This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).
WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials. Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is essential to follow some basic rules:

• WEEE should not be treated as household waste;
• WEEE should be handed over to the relevant collection points managed by the municipality or by registered companies. In many countries, for large WEEE, home collection could be present.

In many countries, when you buy a new appliance, the old one may be returned to the retailer who has to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type and has the same functions as the supplied equipment.

GENERAL SAFETY RULES

• This appliance is intended to be used in household and similar applications such as:
  – Staff kitchen areas in shops, offices and other working environments;
  – Farm houses;
  – By clients in hotels, motels and other residential type environments;
  – Bed and breakfast type environments.
  A different use of this appliance from household environment or from typical housekeeping functions, as commercial use by expert or trained users, is excluded even in the above applications. If the appliance is used in a manner inconsistent with this it may reduce the life of the appliance and may void the manufacturer’s warranty.
  Any damage to the appliance or other damage or loss arising through use that is not consistent with domestic or household use (even if located in a domestic or household environment) shall not be accepted by the manufacturer to the fullest extent permitted by law.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• Children should be supervised to ensure that they do not play with the appliance.

• Children of less than 3 years should be kept away unless continuously supervised.

• If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

• Only use the hose-sets supplied with the appliance for the water supply connection (do not reuse old hose-sets).

• Water pressure must be between 0.1 MPa and 1 MPa.

• Make sure carpets or rugs do not obstruct the base or any of the ventilation openings.

• The final part of a washer dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be damaged.

WARNING:
never stop a washer dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.

• After installation, the appliance must be positioned so that the plug is accessible.
• The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the washer dryer, in such way that a full opening of the washer dryer door is restricted.
• The maximum load capacity of dry clothes depends on the model used (see control panel).
• The appliance is not to be used if industrial chemicals have been used for cleaning.
• Do not dry unwashed items in the washer dryer.
• Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the washer dryer.
• Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the washer dryer.
• Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
• Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as a washer dryer. The items become warm, causing an oxidation reaction in the oil, Oxidation creates heat. If the heat cannot escape, items can become hot enough to catch fire. Piling, stacking or storing oil-effected items can prevent heat from escaping and so create a fire hazard.
• If it is unavoidable that fabrics contain vegetable or cooking oil or have been contaminated by hair care products be placed in a washer dryer they should first be washed in hot water with extra detergent – this will reduce, but not eliminate, the hazard.
• Remove all objects from pockets such as lighters and matches.
• To consult the product technical specification please refer to the manufacturer website.

Electrical connections and safety instructions

• The technical details (supplyvoltage and power input) areindicated on the product rating plate
• Make sure that the electricalsystem is earthed, complieswith all applicable law and thatthe (electricity) socket is compatible with the plug of the appliance. Otherwise, seekqualified professional assistance.
• The use of converters, multiplesockets or extension cords isstrongly advised against

WARNING:
the appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.

• Before cleaning or maintainingthe washing machine, unplugthe appliance and turn off thewater tap.
• Do not pull on the power cordor appliance to unplug themachine.
• Make sure there is no water inthe drum before opening thedoor.

WARNING:
water may reach very high temperatures during the wash cycle.

• Do not expose the washing machine to rain, direct sunlight or other weather elements.
  Protect from possible freezing.

• When moving, do not lift the washing machine by the knobs or detergent drawer; during transport, never rest the door on the trolley. We recommend two people lift the washing machine.

• In the event of fault and/or malfunction, turn off the washing machine, close the water tap and do not tamper with the appliance.
  Immediately contact the Customer Service Centre and only use original spare parts.
  Failure to observe these instruction may jeopardise appliance safety.

INSTALLATION

• Remove the 2 or 4 transportation screws (A) on the back and remove the 2 or 4 flat washers, rubber bungs and plastic spacer tubes (B) as illustrated in figure 1.

• If the washing machine is builtin, unscrew the 3 or 4 transportation screws (A) and remove the 3 or 4 flat washers, rubber bungs and plastic spacer tubes (B).

• During the removal of the screws occasionally spacer tubes fall inside the product, these can be remove by tilting the product forward and recovering them from the floor or inside the base of the machine.

• Cover the open transportation screw holes with the 2 or 4 plastic caps included in the instruction bag. WARNING:
  keep packaging materials away from children.

• Place the corrugated plastic sheet, found on top of the appliance during the unpacking process*, into the base of the appliance as shown in figure 2 (according to the model, consider version A, B or C).

• In some models, the corrugated plastic sheet is not provided. Hydraulic connections

  • Connect the water hose to the watersupply tap (fig. 3) only using the hose supplied with the appliance (do not reuse old hose-sets).

  • SOME MODELS may include one ormore of the following features:

  • HOT&COLD (fig. 4): water mains connection settings with hotand cold water for higher energy savings.
    Connect the grey tube to the cold water tap and the red one to the hot watertap. The machine can be connected tothe cold water tap only: in this case, someprograms may start a few minutes later.

  • AQUASTOP (fig. 5): a device located on the supply tube thatstops water flow if the tube deteriorates;in this case, a red mark will appear in thewindow “A” and the tube must be replaced. To unscrew the nut, press theone-way lock device “B”.

  • AQUAPROTECT – SUPPLY TUBE WITHGUARD (fig. 6): Should water leak from the primaryinternal tube “A”, the transparentcontainment sheath “B” will contain waterto permit the washing cycle to complete.At the end of the cycle, contact theCustomer Service Centre to replace thesupply tube.
    Setting

  • The washing machine should be installed inits final position such that the water fill hoseis not kinked or trapped. The corrugateddrain hose should be inserted into suitabledrain pipe of between 50 cm and 85 cmheight above the floor using the curved drainhose support. If an under sink connection isused the drain hose must be routed above the sink overfill opening to prevent backsiphoning. Care must be taken to avoidkinking or trapping the drain hose (fig. 7).

  • Level the appliance using the feet asillustrated in figure 8:

• ACCESSORY SOLD SEPARATELY a. turn the nut clockwise to release the screw;
  b. rotate the foot to raise or lower it until it touches to the floor;
  c. lock the foot, screwing in the nut, until it tightens against to the bottom of the washing machine.

  • Plug in the appliance.

WARNING:
contact the Customer Service Centre should the power cord need replacement.
Installation faults are not covered by the manufacturers warranty.

DETERGENT DRAWER

The detergent draw is split into 3 compartments as illustrated in figure 9:

• compartment “1”: for prewash detergent;

• compartment “ ”: for special additives, softeners, starch fragrances, etc.;
  WARNING:
  only use liquid products; the washing machine is set to automatically dose additives at each cycle during the last rinse.

• compartment “2”: for washing detergent.

A liquid detergent cup is also included IN SOME MODELS (fig. 10). To use it, place it in compartment “2”. This way, liquid detergent will only enter the drum at the right time. The cup can also be used for bleach when the “Rinse” program is selected. WARNING:
some detergents are not designed for use in the dispenser drawer but are supplied with their own dispenser that is placed in the drum directly.
SOME MODELS are provided with the automatic dosage, this carries out a precise measurement of detergent and softener. In this case, refer to the specific section in the CONTROLS AND PROGRAMS chapter for details.

PRACTICAL HINTS

Load tips
When sorting laundry, make sure:
– have eliminated metallic objects such as hair clips, pins, coins, from laundry;
– to have buttoned pillow cases, closed zips, tied loose belts and long robe ribbons;
– to have removed rollers, hooks or clips from curtains;
– to have carefully read clothing washing labels;
– to have removed any persistent stains using specific detergents.

• When washing rugs, bedcovers or other heavy clothing, we recommend you avoid the spinning cycle.
• To wash wool, make sure the item can be machine washed. Check the fabric label.
• Leave the appliance’s door slightly open between washes, to prevent possible bad smells developing inside the machine.

Useful advice for saving
Tips on how to save money and not damage the environment when using your appliance.

• Load the machine to the highest capacity shown in the programme table for each programme – this will allow you to SAVE energy and water.
• Noise and residual laundry moisture are affected by spin speed: a faster spin is associated with greater noise and lower residual moisture in the laundry.
• The most efficient programmes in terms of combined use of water and energy are usually the longer-lasting ones with lower temperature.

Maximise the load size

• Achieve the best use of energy, water, detergent and time by using the recommended maximum load size.
  Save up to 50% energy by washing a full load instead of 2 half loads.
  Do you need to pre-wash?

• For heavily soiled laundry only!
  SAVE detergent, time, water and between 5 to 15% energy consumption by NOT selecting Prewash for slight to normally soiled laundry.
  Is a hot wash required?

• Pretreat stains with stain remover or soak dried in stains in water before washing to reduce the necessity of a hot wash programme. Save energy by using a low temperature wash programme.
  Before using a drying programme (WASHER-DRYERS)

• SAVE energy and time by selecting a high spin speed to reduce the water content in laundry before using a drying programme.

Dosing the detergent
Below is a short guide with tips and advice on the use of detergent.

• Only use detergents suitable for machine washing.
• Select your detergent according to the type of fabric (cotton, delicates, synthetics, wool, silk, etc.), the colour, the type and level of soiling and the programmed washing temperature.
• To use the right amount of detergent, softener or any other additives, carefully follow the manufacturer’s instructions every time: correctly using the appliance with the right dose allows you to avoid waste and to reduce the environmental impact.

When washing heavily soiled whites, we recommend using cotton programs of 60°C or above and a normal washing powder (heavy duty) that contains bleaching agents that at medium/high temperatures provide excellent results.
For washes between 40°C and 60°C the type of detergent used needs to be appropriate for the type of fabric and level of soiling. Normal powders are suitable for “white” or colour fast fabrics with high soiling, while liquid detergents or “colour protecting” powders are suitable for coloured fabrics with light levels of soiling.
For washing at temperatures below 40°C we recommend the use of liquid detergents or detergents specifically labeled as suitable for low temperature washing.
For washing wool or silk, only use detergents specifically formulated for these fabrics.

• Too much detergent leads to excessive foam, which prevents the cycle being carried out correctly. It could also affect the quality of the washing and rinsing.

The use of ecological detergents without phosphates may cause the following effects:
– cloudier rinse drain water: This effect is tied to the suspended zeolites which do not have negative effects on rinse efficiency.
– white powder (zeolites) on laundry at the end of the wash: this is normal, the powder is not absorbed by fabric and does not change its colour.
To remove the zeolites, select a rinse programme. In the future consider using slightly less detergent.
– foam in the water at last rinse: this does not necessary indicate poor rinsing.
Consider using less detergent in future washes.
– abundant foam: This is often due to the anionic surfactants found in the detergents which are hard to eliminate from laundry.
In this case, do not re-rinse to eliminate these effects: it will not help at all.
We suggest conducting a maintenance wash using a proprietary cleaner.
If the problem persists or if you suspect a malfunction, immediately contact an Authorised Customer Service Centre.

CLEANING AND MAINTENANCE

Looking after your appliance correctly can extend its lifespan.
Cleaning the appliance’s exterior

• Disconnect the machine from the power supply.
• Clean the appliance’s external cabinet, using a damp cloth and AVOIDING ABRASIVES, ALCOHOL AND/OR DILUENTS.

Drawer cleaning

• It is advisable to regularly clean thedetergent drawer to avoid theaccumulation of detergent and additiveresidues.
• Remove the drawer gently but firmly.
• Clean the drawer under running waterand put it back into its compartment.

FOR MODELS WITH AUTOMATIC LIQUID DETERGENT AND SOFTENER DOSING SYSTEM:
Before proceeding with cleaning, all the compartments must be empty.

• Pull out the drawer completely by pressing the release button, paying attention to the leakage of detergent residues.

• Fill the drawer with hot water.

• Shake the drawer in order to let the water flow in all the compartments.

• Empty the drawer from excess water and reinsert it completely.

WARNING:
DO NOT use acid products (for example vinegar) or aggressive detergents to clean the drawer, in order to avoid damaging the seals and/or internal parts of the appliance.

Cleaning the pump filter

• The appliance has a special filter that traps larger residues that could block the draining system, such as buttons or coins (depending on the model, consider version A or B).
  We recommend checking and cleaning the filter 5 or 6 times a year.

• Disconnect the machine from the power supply.

• Ensure all the water has been emptied from the drum.

• Before unscrewing the filter, we recommend you place an absorbent cloth under it to keep the floor dry. A small amount of water will come out of the filter as you remove it – this is normal.

• Turn the filter counter-clockwise to the limit stop.

• Remove and clean the filter; when finished, replace it turning it clockwise.
  The filter handle will be locked when it is not possible to turn any further and the handle is horizontal. Smearing a small amount of liquid soap on the filter seal will help refitting.

• Repeat the previous steps in reverse order to reassemble all parts.

Suggestions for moves or prolonged disuse

• If the appliance is kept in a non-heated room for long periods of time, all water residues must be completely removed from the pipes.
• Disconnect the machine from the power supply socket.
• Detach the tube from the drainage system and clip on the rear of the machine and lower it, fully draining water into a bowl.
• Secure the drain tube with the drainage system and clip on the rear of the machine when finished.
• Keep the door glass and gasket clean.

FOR MODELS WITH AUTOMATIC LIQUID DETERGENT AND SOFTENER DOSING SYSTEM:
should you need to tilt or move the machine, remove the detergent drawer before proceeding, keeping it horizontal so as to avoid any leakage.

REMOTE CONTROL (WI-FI)

This appliance is equipped with Wi-Fi technology that allows you to control it remotely via App.
APPLIANCE PAIRING (ON APP)

• Download the hOn App on your device by framing the following QR code:

or by the link:
go.haier-europe.com/download-app

The App is available for devices running both Android and iOS, both for tablets and for smartphones.
Get all the details of the Wi-Fi functions by browsing the App in DEMO mode.
The frequency of the home Wi-Fi network has to be set on the 2.4 GHz band. You can not configure the machine if your home network is set to the 5 GHz band.

• Open the App, create the user profile (or log-in if it is already created previously) and pairing the appliance following the instructions on the device display.

TO ENABLE REMOTE CONTROL

• Check that the router is switched on and connected to the Internet.
• Load the laundry, close the door, add the detergent if it’s necessary.
• Turn the programme selector to the REMOTE CONTROL (Wi-Fi) position : the door will lock and the controls on the control panel will be disabled.
• Start the cycle using the app. When thecycle has been completed, turn off themachine by turning the programme selector to the OFF position to unlock the door.

TO DISABLE REMOTE CONTROL

• To exit REMOTE CONTROL mode while a cycle is underway, turn the programme selector to any position other than REMOTE CONTROL (Wi-Fi), without going through the OFF. The control panel on the appliance will be operative once again, and if the cycle is paused, you will be able to open the door once the DOOR LOCKED indicator light switches off.
  For safety reasons, in some wash cycle phases, the door can be opened only if the level of the water is below its lower edge and if the temperature is less than 45°C. If these conditions are met, wait for the DOOR LOCKED light to switch off before opening the door.

• With the door closed, turn the knob to the REMOTE CONTROL (Wi-Fi) position to control the appliance using the app once again. If there is a cycle underway, it will continue.

QUICK USER GUIDE

This appliance automatically adjusts the level of the water to the type and quantity of washing. This system gives a reduction in energy consumption and a saving in washing times.
Program selection

• Turn on the appliance and select therequired program.
• Adjust the washing settings if necessaryand select the required options.

DRYING (WASHER-DRYERS only)
If you would like the drying cycle to begin automatically after washing, select the washing programme required and select the drying cycle.
Or you can finish the wash and then select the drying programme.

• Press the programme start button.
• The end of the programme will be indicated by a message on the display (on some models, all the indicator lights on the stage will light up).
• Turn off the appliance.

For any type of wash, see the program table and follow the operating sequence as indicated.
Technical data
Water pressure: min 0.1 Mpa / max 1 Mpa
Spin r.p.m.: See rating plate.
Power input / Power current fuse amp / Supply voltage: See rating plate.

CONTROLS AND PROGRAMS

• Depending on model
  A START/PAUSE button
  B TEMPERATURE SELECTION button
  C SPIN SPEED button
  D STAIN LEVEL/RAPID/STEAM
  LEVEL button
  E DELAY START button
  F OPTIONS button
  G DRYING SELECTION button
  H SPECIAL PROGRAMMES button (only available on certain models)
  B+C CHILD LOCK
  STEAM LEVEL (only available on certain models)

WARNING:
don’t touch the buttons while inserting the plug because the machines calibrates the systems during the first seconds: touching the buttons, the machine couldn’t work property. In this case, remove the plug and repeat the operation.
PROGRAMME selector with OFF position

• When the programme selector is turned the display lights up to show the settings for the programme selected.
• Switch off the washing machine by turning the selector to OFF.

First starting

– Language setting

• After connecting the machine to the network and turning it on, press the “TEMPERATURE SELECTION” or “SPIN SPEED” button to display the available languages.

• Select the desired language pressing the START/PAUSE button.
  – Change the language

• If you want to change the setting language, you will have to press simultaneously “TEMPERATURE SELECTION” and “DELAY START” buttons for about 5 seconds. ENGLISH will appear on the display, and you will be able to choose a new language (by pressing “TEMPERATURE SELECTION” or “SPIN SPEED” button).

• Press START/PAUSE button to confirm your choice.

START/PAUSE button
Close the door BEFORE selecting the button START/PAUSE.

• To start the selected cycle with the preset parameters, press START/PAUSE. When the programme is running, the display will show the time to elapse.

• Moreover, If you want to modify the chosen programme, press the desired options buttons, modify the default parameters and then press START/PAUSE button to start the cycle.
  Only the options compatible with the set programme can be selected.

• After switching on the appliance, wait a few seconds for the programme to start running.

PROGRAMME DURATION

• When a programme is selected the display automatically shows the cycle duration, which can vary, depending on the options selected.
• Once the programme has started you will be kept informed constantly of the time remaining to the end of the wash.
• The appliance calculates the time to the end of the selected programme based upon a standard loading, during the cycle, the appliance corrects the time to that applicable to the size and composition of the load.

PROGRAMME END

• When the display shows that the programme is finished and the DOOR LOCKED indicator light has gone out, the door can be opened.
• At the end of the cycle, switch off the appliance by turning the selector to OFF.

The programme selector must be returned to the OFF position at the end of each cycle or when starting a subsequent wash cycle prior to the next programme being selected and started.
PAUSING THE MACHINE

• While a cycle is running, the machine canbe paused by simply pressing theSTART/PAUSE button.
  For safety reasons, in some wash cycle phases, the door can be opened only if the level of the water is below its lower edge and if the temperature is less than 45°C. If these conditions are met, wait for the DOOR LOCKED light to switch off before opening the door.

• Press the START/PAUSE button again to resume the programme from the cycle phase where it left off.
  CANCELLING THE SET PROGRAMME

• To cancel the programme, set the selector to the OFF position.

• Wait until the DOOR LOCKED light has gone out before opening the door.

TEMPERATURE SELECTION button

• This button allows you to change the temperature of the wash cycles.
• It is not possible to raise the temperature over the maximum allowed for the programme, in order to protect the fabrics.
• If you want carry out a cold wash all the indicators must be off.

SPIN SPEED button

• By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle can be cancelled.

• If the label does not indicate specific information, it is possible to use the maximum spin expected in the program.
  To prevent damage to the fabrics, it is not possible to increase the speed over the maximum allowed for the programme.

• To reactivate the spin cycle press the button until you reach the spin speed you would like to set.

• It is possible to modify the spin speed without pausing the machine.

An over dosing of detergent can cause excessive foaming. If the  appliance detects the presence of excessive foam, it may exclude the spinning phase or extend the duration of the program and increase water consumption.
The machine is fitted with a special electronic device, which prevents the spin cycle should the load be unbalanced. This reduces the noise and vibration in the machine and so prolongs the life of your machine.
**STAIN LEVEL / RAPID / STEAM LEVEL button*
This button allows you to choose between three different options, depending on the selected programme:
– STAIN LEVEL**

• Once the programme has been selected the wash time set for that programme will be automatically shown.
• This option allows you to choose between 3 levels of wash intensity modifying the length of the programme, depending on how much the fabrics are soiled (can only be used on some programmes as shown in the table of programmes).

– RAPID
The button becomes active when you select the RAPID CARE (14’/30’/44′) programme on the knob and allows you to select one of three durations indicated.
– STEAM LEVEL*
After selecting the STEAM CARE PRO programme, you can use this button to choose between three steam treatments of different intensities, designed for dry or wet garments and depending on the type of fabric:
– COTTON (default selection)
This programme is used for cotton garments. On wet fabrics (e.g., after washing), it is suitable for relaxing creases after spinning; on dry fabrics it is instead designed to achieve the ideal humidity level for easier ironing.
– SYNTHETIC (press button once)
This programme is used for synthetic garments. On wet fabrics (e.g., after washing), it is suitable for relaxing creases after spinning; on dry fabrics it is instead designed to achieve the ideal humidity level for easier ironing.
– DELICATES (press button twice)*
With the help of steam, the cycle refreshes and relaxes creases in garments after use. The programme consists of an initial phase in which the steam acts and a final phase in which the excess humidity is removed for immediate use. The cycle is suitable for dry fabrics.
These options must be selected before pressing the START/PAUSE button.
STEAM LEVEL
(only available on certain models)
DELAY START button**

• This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours.

• To delay the start use the following procedure:
  – Select the required programme.
  – Press the button once to activate the delay start and then press it again (or hold it) to set the desired delay. The delay increases each time the button is pressed up to 24 hours, at which point pressing the button again will reset the delay start to zero.
  – Confirm by pressing the START/PAUSE button. The delay countdown will begin and when it has finished the programme will start automatically.

• It is possible to cancel the delay start by turning the programme selector to OFF.

If there is a break in the power supply whilst the machine is operating, when the power is restored, the machine will restart from the beginning of the phase it was in when the power was lost.
OPTIONS button

This button allows you to choose between three different options, depending on the selected programme:
– PREWASH

• This option allows you to make a prewash and it is particularly useful for heavily soiled loads (can be used only on some programmes as shown in the table of programmes).

• We recommend you use only 20% of the recommended quantities shown on the detergent pack.
  – EXTRA RINSE

• This option allows you to add one rinse at the end of the washing cycle and is useful for people with delicate and sensitive skin, for which a small amount of detergent residue can cause irritations or allergies.

• It is advisable to also use this function for the children clothes and for the washing of heavily soiled items, which requires a lot of detergent to be used, or for the washing of toweling items whose fibres mostly have the tendency to hold the detergent.

– HYGIENE +
Activated when you set 60°C of temperature. This option allows deep cleaning of your clothes by maintaining the same temperature for the whole wash.
These options must be selected before pressing the START/PAUSE button.
If an option is selected that is not compatible with the selected programme then the option indicator light first flashes and then goes off.

DRYING SELECTION button

• Automatic washing/drying cycle:
  after the selection of washing programme according to laundry type, select a degree of dryness by pressing this button. At the end of the washing programme, the selected drying cycle will start automatically.
  If a washing programme is not compatible with automatic drying is selected, this function will not be activated.
  If you exceed the maximum dryable load of laundry indicated in the programme table, the laundry may not be dried satisfactory.

• To only perform a drying cycle:
  select the desired drying programme in conjunction with your fabrics, by pressing this button it is possible to select a degree of dryness that is different to the default one (except for the wool drying programme).

• To cancel the cycle during the drying phase, press the button for about 3 seconds.

• “End” will appear in the display at theend of the programme and the DOORLOCKED light will go off, it is nowpossible to open the door.

SPECIAL PROGRAMMES button
(Only available on certain models)
This button allows you to choose between three different options (available for some programmes only):

– ACTIVE WASH

• This option (which can be set in several programs) optimizes the water and energy consumption of the selected program, maintaining the washing performance unchanged.

• ACTIVE WASH is designed for reduced loads and lightly soiled garments, aiming to limit the unnecessary waste.
  – NIGHT & DAY

• This option reduces the intermediate spin speed to 400 rpm, where applicable, increase the water level during rinsing and keep the laundry immersed in water after the final rinse, in order to spread the fiber perfectly.

• During the drum water retention phase, the machine is in pause mode.

• Press START to end the cycle with the spin (which can be reduced or removed with the specific button) and drain phase.

• Thanks to electronic control, the water in the intermediate phases is emptied silently, making this option very useful for washing at night.
  – DRUM CLEAN

• Developed to clean the washing machine drum.

• Use only powder detergent.

• Do not start the programme with laundry in the washing machine.

• It is suggested that this is carried out after every 50 washing cycles.

• The option can only be selected for the DRAIN & SPIN programme.

These options must be selected before pressing the START/PAUSE button.
If an option is selected that is not compatible with the selected programme then the option indicator light first flashes and then goes off.
CHILD LOCK

• Pressing simultaneously the buttons “TEMPERATURE SELECTION” and “SPIN SPEED” for about 3 seconds, the machine allows you to lock the keys. In this way, you can avoid making accidental or unwanted changes if a button on the display is pressed accidently during a cycle.
• The key lock can be simply cancelled by pressing the two buttons simultaneously again or turning off the appliance.

Digital Display
The display’s indicator system allows you to be constantly informed about the status of the machine.
*Only available on certain models

1. DOOR LOCKED INDICATOR LIGHT
   • The indicator light is illuminated when the door is fully closed.
   Close the door BEFORE selecting the START/PAUSE button.
   • When START/PAUSE is pressed on the  machine with the door closed, the indicator will flash momentarily and then illuminate.
   If the door is not properly closed, the light will continue to flash for about 7 seconds, after which the start command will be automatically cancelled. In this case, close the door in the proper way and press the START/PAUSE button.
   • Wait until the DOOR LOCKED light has gone out before opening the door.

2. STAIN LEVEL INDICATOR LIGHT
   The indicator light shows the selection of the relevant option.

3. “KG MODE PLUS” INDICATOR LIGHT (active only on certain programmes)
   • During the first minutes of the cycle, the “KG MODE PLUS” indicator will remain on while the intelligent sensor will weigh the laundry and adjust the cycle time, water and electricity consumption accordingly.
   • Through every wash phase “KG MODE PLUS” allows to monitor information on the wash load in the drum and in the first minutes of the wash it:
   – adjusts the amount of water required;
   – determines the length of the wash cycle;
   – controls rinsing according to the type of fabric selected to be washed it;
   – adjusts the rhythm of drum rotation for the type of fabric being washed;
   – recognises the presence of too much soap suds, and if necessary, adjust the amount of rinse water.0
   – adjusts the spin speed according to the load, thus avoiding any imbalance.

4. Wi-Fi INDICATOR LIGHT
   • On models equipped with Wi-Fi, it indicates the status of the connection. It could be:
   – FIXED ON: remote control enabled.
   – SLOW FLASHING: remote control disabled.
   – QUICK FLASHING FOR 3 SECONDS, THEN OFF: the machine cannot connect to the home Wi-Fi network or has not yet been associated with the App.
   – SLOW BLINKING FOR 3 TIMES, THEN OFF FOR 2 SECONDS: reset of the Wi-Fi network (during the association with the App).
   – ON FOR 1 SECOND, THEN OFF FOR 3 SECONDS: the door is open. Remote control cannot be activated.

5. KEY LOCK INDICATOR LIGHT0
   The indicator light show that the keys are locked.0

6. WASH TEMPERATURE INDICATOR LIGHTS
   The indicator lights show the washing temperature of the selected programme that can be changed (where allowed) by the relevant button. If you want carry out a cold wash all the indicators must be off.

7. SPIN SPEED INDICATOR LIGHTS
   The indicator lights show the spin speed of the selected programme, you can reduce or omit by the relevant button.

8. OPTIONS INDICATOR LIGHTS
   The indicator lights show the options that can be selected by the relevant button.

9. DRYING SELECTION INDICATOR LIGHTS
   The indicators display the degrees of dryness that can be selected by the relevant button:
   Automatic drying programmes
   EXTRA DRY
   (suitable for towels, bathrobes and bulky loads).
   IRON DRY
   (that leaves the laundry ready for ironing).
   CUPBOARD DRY
   (for items that will be put away without ironing).

10. SPECIAL PROGRAMMES INDICATOR LIGHTS
    The indicator lights show the options that can be selected by the relevant button.

Table of programmes
Please read these notes:

• Maximum load capacity of dry clothes, according to the model used (see control panel).
  (Only for models with liquid detergent compartment)
  When only a limited number of articles have stains which require treatment with liquid bleaching agents, preliminary removal of stain can be carried out in the washing machine.
  Pour the bleach into the liquid bleach container, inserted into the compartment marked “2” in the detergent drawer, and set the special programme RINSE.
  When this phase has terminated, switch off the appliance, add the rest of the fabrics and proceed with a normal wash on the most suitable programme.
  ( • ) Only with PREWASH option selected (programmes with PREWASH option available).

  1. When a programme is selected, on the display is shown the recommended wash temperature that can be reduced (where allowed) by the relevant button.
  2. For the programmes shown you can adjust the duration and intensity of the wash using the STAIN LEVEL button.
  3. Selecting the RAPID CARE programme on the knob, it will be possible to select with the RAPID button, one of the three rapid programmes available among 14′, 30′ and 44′.
  4. Programmes for automatic drying.

INFORMATION FOR THE TEST LABORATORIES
STANDARD PROGRAMMES ACCORDING TO Directive 96/60/CE
WASHING:
ECO 40-60 PROGRAMME
SETTING THE TEMPERATURE TO 60°C
DRYING:
DRYING PROGRAMME HIGH HEAT (COTTON) DEGREE OF DRYNESS CUPBOARD DRY
STANDARD PROGRAMMES ACCORDING TO (EU) No 2019/2023
WASHING:
ECO 40-60 PROGRAMME
WASH AND DRY:
ECO 40-60 PROGRAMME + DEGREE OF DRYNESS CUPBOARD DRY
In the case that the machine has an explicit energy declaration: it means that this machine is more efficient than the limit value of the energy efficiency class “A” as indicated on frontal drawer, according to delegated EU-Regulation 2019/2014.

Description of programmes
To clean different types of fabrics andvarious levels of dirt, the washing machinehas specific programs to meet every needof washing (see table of programmes).
Choose programme in accordance with the laundry instructions appearing on labels, especially the maximum recommended temperature.
WASHING
WARNING:
IMPORTANT WASH PERFORMANCE ADVICE.

• New, coloured garments should bewashed separately for at least 5 or 6washes.
• Certain large dark items such asjeans and towels should always bewashed separately.
• Never mix NON COLOURFAST fabrics.

REMOTE CONTROL (Wi-Fi)
Position that you have to select when youwant to enable / disable remote controlthrough the App, via Wi-Fi. In this case, the start of cycle will take place through the Appcommands. More details in the REMOTE CONTROL (Wi-Fi) section.
Cottons
This programme is suitable for washingcoloured cotton garments at 40°C or forensuring the highest degree of cleanliness forcotton resistant laundry washing at 60°C or90°C. The final spin is at maximum speed thatensures excellent water removal.
ECO 40-60
The ECO 40-60 programme is able to cleannormally soiled cotton laundry declared tobe washable at 40°C or 60°C, together inthe same cycle. This programme is used to assess the compliance with the EU Ecodesign legislation (environmentally friendly products design).
Wash and Dry (ECO 40-60 + )
The WASH AND DRY cycle is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle, and to dry it in such a way that it can be immediately stored in a cupboard.
This programme is used to assess the compliance with the EU Ecodesign legislation (environmentally friendly products design).

Wool & Soft Care
This programme performs a wash cycle dedicated to the “Machine Washable” Wool fabrics, to the articles to be washed by hand and to treat delicate garments and precious fabrics. This programme washes at a low temperature for 49 minutes. Recommended for small loads.
20°C
This innovative programme, allows you to wash different fabrics and colours together, such as cottons, synthetics and mixed fabrics at only 20°C and provides an excellent cleaning performance. Consumption on this program is about 40% of a conventional 40°C cottons wash.
Synthetic and Coloured
This programme allows you to wash different fabrics and different colours all together. The rotation movement of the drum and the water levels are optimized, both during the washing the rinsing phase.
The accurate spin action, ensures a reduced formation of creases in the fabrics.
Drain & Spin
The program completes the drain and a maximum spin. It is possible to delete or reduce the spin through the SPIN SELECTION button.
Rinse
This program performs 3 rinses with an intermediate spin (which can be reduced or excluded by using the appropriate button). It is used for rinsing any type of fabric, for example after a wash carried out by hand.
Steam Care
This programme uses a steam treatment torelax creases and achieve the ideal degreeof humidity for easier ironing. Threedifferent intensity levels can be selected viathe STEAM LEVEL button, designed for dror wet garments and depending on the typeof fabric.
Rapid Care (14’/30’/44′)
Saving without compromising! This newprogramme may be used to obtain excellenresults while saving water, energy, detergentand time. This option washes at a mediumtemperature suitable for any kind of fabricRecommended for small loads and lightlsoiled items.
ALL IN ONE 59′
This programme allows you to washdifferent fabrics together such as cottonssynthetics and mixed fabrics in only 59minutes, using the full load of the washingmachine, at 40°C (or less) temperature.This programme is particularly suited toslightly dirty fabrics.
EXTRA CARE
This new programme may be used to washlaundry of different colourfast colours and fabrics together without altering thei
original look and feel. Through a perfecemulsion of water and detergent, the bespossible care of your clothes is guaranteed,with optimal washing performance at atemperature of 30°C.
DRYING

WARNING:
Dispensers used for concentrated powders and liquid detergents must be removed from the drum before commencing the tumble drying programmes.
The drum changes direction during the drying cycle to prevent the laundry from tangling and producing even more drying.
Cool air is used during the last 10/20 minutes of the drying cycle to minimize creasing.
Dry Wool
Low temperature drying programme, idealto dry woollen clothes with maximum careand softness, reducing rubbing of fabricsrelated to the amount of the washing andthe spin speed selected for the wash.The cycle is suitable for small loads up to1 kg (3 sweaters). The wool drying cycle of this machine has been approved by “The Woolmark Company” for the drying of machine washable wool products provided that the products are washed and dried according to the instructions on the garment label and those issues by the manufacturer of this machine.
The Woolmark symbol is a Certification mark in many countries. M1715
Low Heat
Low temperature drying programme recommended for synthetics and mixed fibres (always refer to the laundry care label).
High Heat
High temperature drying programme recommended for cottons and linen items (always refer to the laundry care label).

DRYING CYCLE

• Drying guidance advice is general, but practical experience of using the product will help you to achieve the best drying results.
• We recommend setting a lower drying time than indicated, when first using the appliance in order to establish the degree of dryness required.
• We recommend not drying fabrics that fray easily, such as rugs or garments with a deep pile, in order to avoid air duct clogging.
• We recommend that you sort the laundry by the following methods:

– By drying care symbols, which are displayed on the clothing labels

| Suitable for tumble drying.
---|---
| Tumble dry at high temperature.
| Tumble dry at low temperature only.
| DO NOT tumble dry.

If the fabric does not have a care label, you should assume that it is not suitable for drying.
– By size and thickness
Whenever the wash load is bigger than the drying capacity, separate the clothes according to thickness (e.g. towels from thin underwear).
– By fabric type
Cottons/linen: towels, cotton jersey, bed and table linen.
Synthetics: blouses, shirts, overalls, etc. made of polyester or polyamide, as well as for cotton/synthetic mixes.

• Only dry pre-spun laundry.

The correct way to dry

• Open the door.
• Fill with the laundry, not exceeding the maximum drying load indicated in the programme table. For large items (e.g. sheets) or very absorbent items (e.g. towels or jeans), it is a good idea to reduce the load.
• Close the door.
• Select the more suitable drying program for your laundry (HIGH HEAT, LOW HEAT, DRY WOOL).
• Select the degree of dryness that you require:

EXTRA DRY
(suitable for towels, bathrobes and bulky loads).
IRON DRY
(that leaves the laundry ready for ironing).
CUPBOARD DRY
(for items that will be put away without ironing).
TIMED DRYING PROGRAMS
– 120 MINUTES
– 90 MINUTES
– 60 MINUTES
– 30 MINUTES

By selecting the wool drying programme, it’s not possible to select a degree of dryness different from the default one.

• The washer dryer will calculate the time needed for drying and the level of moisture remaining in the laundry, according to the load and drying type selected.
• Check that the tap is turned on and that the discharge hose is positioned correctly.

WARNING:
Do not dry articles with special padding (e.g. quilts, quilted anoraks, etc.) and very delicate fabrics.
If garments are drip/dry, load less items to prevent creasing.

• Press the START/PAUSE button (the display will show the drying time remaining).

The appliance calculates the time to the end of the selected programme based upon a standard loading.
During the cycle, the appliance corrects the time according to the size and composition of the load.
During the drying phase the drum willaccelerate to a higher speed todistribute the load and to optimize thedrying performance.
In order to ensure the correct operation of the appliance, it is advisable not to interrupt the drying phase unless it is absolutely necessary.

AUTOMATIC WASHING/DRYING CYCLE
You cannot exceed the maximum
dryable load of laundry indicated in the programme table, otherwise the laundry will not be dried satisfactory.
If you want a drying cycle to start automatically after washing, simply select the desired washing cycle, set the desired degree of drying through the DRYING SELECTION button and start the cycle.
At the end of the washing programme, the set drying cycle will automatically start (see section “DRYING SELECTION”).

TROUBLESHOOTING AND WARRANTY

If you believe the washing machine is not working correctly, consult the quick guide provided below which includes some practical tips on how to fix the most common problems.
ERROR CODE FORMAT

• Models with a display: the error is shown by a number preceded by the letter “E” (example: E2 = Error 2).
• Models without display: an error is shown by a sequence of flashes of every LED.
  The error code is shown by the number of flashes followed by a pause of 5 seconds (example: two flashes – pause 5 seconds – two flashes – repeating = Error 2).

E2 (with display)
2 flashes of the LEDs(without display)| The machine cannot load water.
Make sure the water supply tap is open.
Make sure the water supply hose isn’t bent, kinked or trapped.
Make sure the drain pipe is at the proper height (see installation section).
Close the water supply tap, unscrew the filler hose from the back of the washing machine and make sure the “anti-sand” filter is clean and not blocked.
Check that the filter is not clogged or that there are no foreign bodies inside the filter compartment that can obstruct the proper flow of water.
E3 (with display)
3 flashes of the LEDs(without display)| The washing machine does not drain water.
Check that the filter is not clogged or that there are no foreign bodies inside the filter compartment that can obstruct the proper flow of water.
Make sure the drain hose isn’t bent, kinked or trapped.
Make sure the home drainage system is not blocked and is allowing water to flow through without obstruction. Try to drain the water in the sink.
E4 (with display)
4 flashes of the LED(without display)| There is too much foam and/or water.
Ensure the correct amount of detergent is being used and the detergent is designed for use in a washing machine.
E7 (with display)
7 flashes of the LEDs (without display)| Door problem.
Make sure the door is correctly closed.
Make sure the clothes inside the drum are not preventing the door from closing fully.
If the door is locked, turn off and unplug the washing machine from the electrical supply socket, wait 2-3 minutes and reopen the door.
Any other code| Turn off and unplug the washing machine, wait a minute. Turn on the machine and restart a program. If the error occurs again contact an Authorised Customer Service Centre directly.

The standard manufacturer warranty covers faults caused by electrical or mechanical faults in the product due to an act or omission of the manufacturer. If a fault is found to be caused by factors outside the product supplied, miss-use or as a result of the instructions on use not being followed, a charge may be applied.
Except for the list of spare parts available  on our website, under no circumstances should you repair or attempt to repair the appliance yourself or have the appliance repaired by inexperienced and / or unqualified persons. Repairs carried out by inexperienced and / or unqualified persons can cause injury or serious malfunction of the equipment and damage to property. It is advisable to contact our Authorized Technical Assistance Centres.
We recommend that you always use original spare parts, which can be obtained from our customer service for a period of at  least 10 years from the moment the appliance is put into circulation within the European Economic Area.
WARNING:
The manufacturer cannot be held
responsible for any damage to thingsand people and / or for safety issuesresulting from repairs not carried outby an Authorized Technical AssistanceCentre or by a service providerauthorised by the manufacturer inaccordance with company guidelinesrelating to the repair and maintenanceof its products. Any damage caused tothe product by unauthorized personnelduring a repair attempt will not becovered by the conventional warranty.
From 1 March 2021, energy and environmental information relating to the energy labelling of household appliances and the specifications for their eco-design are visible in Europe in the product database (EPREL) at the following link https://eprel.ec.europa.eu/ or through the QR code located on the energy label.
Warranty
The product is guaranteed under the terms and conditions stated on the certificate included with the product. The certificate has to be stored so as to be shown to the Authorized Customer Service Centre in case of need. You can also check the warranty conditions on our web site. To obtain assistance, please fill in the form on-line or contact us at the number indicated on the support page of our web site.
Our service contacts (telephone numbers and web addresses) detailed by country are available on the warranty certificate included with the product.

By placing the **** mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product.
The manufacturer declines all responsibility for any printing errors in the booklet included with this product. Moreover, it also reserves the right to make any changes deemed useful to its products without changing their essential characteristics.

– H3DPS UK –
23. 0 9 – 70 038 578 – ID M s .r . l .

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>