Lujiang A2 Mini Pocket Printer User Guide
- August 27, 2024
- Lujiang
Table of Contents
Lujiang A2 Mini Pocket Printer
Product Information
Specifications:
- Product Name: Mini Pocket Printer
- Model: A2
Product Usage Instructions
Setting Up the Mini Pocket Printer
Connect the provided cable to the Mini Pocket Printer and a power source.
Printing with the Mini Pocket Printer
Install the required printer drivers on your device. Connect your device to
the Mini Pocket Printer via Bluetooth or USB, depending on the model. Open the
document or image you want to print and select the Mini Pocket Printer as the
printing device.
Maintenance of the Mini Pocket Printer
Regularly clean the printer head and ensure that the paper roll is loaded
correctly to avoid printing issues.
FAQ
-
Q: How do I troubleshoot issues with my Mini Pocket Printer?
A: Refer to the troubleshooting guide provided in the user manual for step-by- step instructions on resolving common issues. -
Q: Is the Mini Pocket Printer FCC-certified?
A: Yes, the Mini Pocket Printer complies with FCC regulations as stated in the FCC Statement section of the user manual.
First time using
Please open the paper compartment cover and put the printing paper on top of
the printer. After closing the paper compartment cover, the printing paper
will expose a short section of the printer, as shown in the
figure:
Only one side of the printing paper can be printed. Please place the printing paper in the correct direction.
Product introduction
Power indicator status
- Steady green light: power on/standby/charge completed Red light is always on: charging/out of paper/overheating/opening the cover
- Flashing red: low battery will cause light printing effect, please charge in time.
App download and settings
Mobile Download
Search “Luck Jingle” in the App Store.
Settings
Double-click the power button, the printer will print out the QR code of
the bound device; add a device through the App, scan and scan the QR code to
connect to the printer (Note: Do not search for Bluetooth printer connection
in the Blue Tooth settings of the mobile phone) In the startup state, click
the power button six times to calibrate the label.
Replacement of consumables
- Open the cover: see the direction of the arrow as shown in the figure, and pull the paper compartment cover up to open the cover
- Consumables: as the arrow shows, put the heat-sensitive surface of the paper on the same side as the thermal print head
Safety and precautions
- There is a built-in lithium battery, please do not use it in an environment with temperatures higher than 40 C; keep away from fire and other heat sources, and do not place it in the hot sun, such as closed car;
- Children should be charged and used under the supervision of adults. After full charge, please make sure to pull out the charging cable in time to prevent overheating, short circuit or fire;
- Do not put the product in fire or water to avoid battery short circuit or fire or burn;
- The operating temperature range is 0C to 40C, please do not exceed the recommended temperature range.
Trouble shooting guide
- Without any print content on the paper when printing
- Check the paper is loaded in the direction;
- If not, print the self-test page and check;
- If the self-test page cannot be printed, the printer is malfunctioning;
- If the self-check page is correct, check the paper or App.
- Print blurry
- Check the default print density for the best print results;
- Check if there are horizontal lines or only part of the content can be printed;
- Check to see if the print head is blocked and clean with alcohol;
- If the print quality is not good, please use the original paper series.
- A paper shortage error message is displayed
- Check that the printer is out of paper;
- If not, make sure the cover is locked correctly (loose pages may cause the printout to shift or Paper test to fail).
- Printing stops unexpectedly
- In order to ensure the reliability of the printer, multiple protection instructions are designed;
- The printer will stop working due to lack of paper, data errors, excessive temperature, or low battery power;
- Follow the prompts on the application to analyze the problem.
Warnings
- This product does not include a power adapter as standard. If you use a power adapter for charging, you should purchase a 5V/1A power adapter that has obtained CCC certification and meets the standard.
- This product is a professional product, please use the original type of battery, if you replace the original type of battery or use the wrong type of battery, there will be an explosion risk, be sure to follow the instructions to dispose of the used battery.
Safety and precautions
- Do not use the carp battery in the environment with a temperature higher than 40°C, do not go near the open flame and other heat sources, do not place in the hot sun, such as unoccupied, closed car;
- Children should be charged and used under the supervision of adults. After full charge, ensure that the charging cable is removed in time to prevent overheating and short circuit or fire.
- Do not place the product in fire or water to avoid battery short circuit or fire or burn; Operating temperature range is o°c to 40 °c, please do not operate outside the recommended temperature range;
Do not touch the print head directly to avoid damage, especially do not touch the print head immediately after printing, in case of overheating and scalding.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. if this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>