emulait Bottle Feeding Starter Kit User Manual
- August 27, 2024
- Emulait
Table of Contents
STARTER KIT
USER INSTRUCTION MANUALhttps://qr1.be/0EDF
Bottle Components
- Cap 2pc
- Lid 2pc
- Nipple 2pc
- Responsive Flow Valve 2pc
- Anatomy Bottle 1pc*
- Anatomy Bottle Base 1pc*
- Classic Bottle 1pc*
- Classic Bottle Base 1pc*
- Cleaning Brush 1pc
- Follow the instructions corresponding with the bottle you are using
Before First Use
Clean hands and surfaces thoroughly before handling. Disassemble the nipple and base from the bottle and sterilize in boiling water for five (5) minutes. Allow to cool before giving to baby.
How to Assemble*
Responsive Flow Valve
Emulait nipples must be used with a Responsive Flow Valve inserted to
prevent collapse. You may notice that the nipple compresses during feeding.
This is due to suction from the baby’s latch and does not affect the flow of
milk.
- Insert Responsive Flow Valve
- Fill the bottle and attach nipple (with valve inserted)
How to Hold Bottle
How to Disassemble for Cleaning*
- Detach nipple and base
- Remove Responsive Flow Valve
- Invert nipple
- You will assemble and disassemble the Anatomy and Classic Bottle the same way
Cleaning and Sterilizing
Before each subsequent use, fully disassemble all parts and clean carefully to
ensure hygiene. Wash all parts in warm water and dishwashing soap. Rinse and
dry thoroughly, ensuring all cavities are clean.
We recommend cleaning all parts in the dishwasher with the Emulait dishwasher
basket (top rack only). Bottle parts can be cleaned in an electric or
microwave sterilizer. Use sterilizing solutions or sterilizers strictly
according to the manufacturer’s instructions. Steam can cause severe burns,
please exercise caution when sterilizing bottle parts. Avoid unnecessary
handling of sterilized items and equipment.
For Your Child’s Safety and Health
WARNING!
- Continuous and prolonged sucking of fluids will cause tooth decay.
- Always check food temperature before feeding.
- Throw away at the first signs of damage or weakness.
- Keep components not in use out of the reach of children.
- Never attach to cords, ribbons, laces, or loose parts of clothing. The child can be strangled.
- Inspect before each use and pull the feeding teat in all directions.
- Remove from your baby’s mouth when the baby is not feeding.
- Do not use a microwave oven to heat the bottle as microwave ovens can create hotspots in milk or formula.
- Do not leave a feeding teat in direct sunlight or heat, or leave in disinfectant (sterilizing solution) for longer than recommended, as this may weaken the teat.
- The bottle components are not toys and should not be given to children to play with or suck on.
- Glass bottles may break.
- Always use this product with adult supervision.
- Never use feeding teats as a soother.
Conforms to EN 14350
Yours Truly
Documents / Resources
|
emulait Bottle Feeding Starter
Kit
[pdf] User Manual
9L, Bottle Feeding Starter Kit, Feeding Starter Kit, Starter Kit, Kit
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>