Emulait Starter Kit Breast Like Bottles User Manual
- June 13, 2024
- Emulait
Table of Contents
Starter Kit Breast Like Bottles
User Manual
What’s Included
Before Fust Use
Clean hands and surfaces thoroughly before handling. Disassemble all products and sterilize each part in boiling water for about five minutes. Let all parts cool and dry before reassembly.
How to Assemble
Flow Control
Emulait Nipples must be used with a flow control valve inserted to prevent
collapse. You will find slow, medium, and fast flow control valves in your
Starter Kit. Choose desired flow rate and insert into the Emulait Nipple
before use.
You may notice that the nipple compresses during feeding. This is due to
suction from the baby’s latch and does not affect the flow of milk.
-
Insert flow control Insert flow control valve
into the Emulait Nipple and push it into place -
Fill the bottle and attach valve nipple on to bottle base with flow control valve inserted
How to Hold Bottle
How to Disassemble for Cleaning
- Detach nipple and base
- Remove flow control valve Lightly press down on nipple to remove flow control valve
- Invert nipple To ensure a thorough cleaning, use the Emulait bottle brush to clean between fibres
Cleaning and Sterilizing
Fully disassemble all parts. Wash all parts in hot water and soap. Rinse and
dry thoroughly, ensuring all cavities are clean.
All parts are dishwasher safe (top rack only), and safe for use in an electric
sterilizer, microwave sterilizer or boiling water.
Use sterilizing solutions or sterilizers strictly according to the
manufacturer’s instructions. Steam can cause severe skin burns, use caution
when boiling on the stove or using any sterilizing equipment. Avoid
unnecessary handling of sterilized items and equipment.
For Your Child’s Safety and Health
WARNING! Always check food temperature before feeding. Dispose of bottle
components at the first signs of damage or structural weakness.
Keep components not in use out of the reach of children. Remove from your
baby’s mouth when the baby is not feeding.
Always use this product with adult supervision. Always check the nipples for
signs of wear and replace when damaged.
Do not use a microwave oven to heat the bottle as microwave ovens can create
hotspots in milk/formula and/or bottle components.
The bottle components are not toys and should not be given to children to play
with or suck on.
Documents / Resources
|
Emulait Starter Kit Breast Like
Bottles
[pdf] User Manual
Starter Kit Breast Like Bottles, Starter Kit, Breast Like Bottles, Like
Bottles, Bottles
---|---