emulait Creates Customized Baby Bottles Instruction Manual
- June 13, 2024
- Emulait
Table of Contents
emulait Creates Customized Baby Bottles
What’s Included
-
Lid x1
-
Capx1
-
Nipple x1
-
Flow Control Valve x 3 (Slow, Medium, Fast)
-
Classic Bottle x 1
-
Classic Base x 1
Before First Use
Flow Control
Clean hands and surfaces thoroughly before handling.
Disassemble all products and sterilize each part in boiling water for about
five minutes. Let all parts cool and dry before reassembly.
How to Assemble
Flow Control
Emulait Nipples must be used with a flow control valve inserted to prevent
collapse. You will find slow, medium, and fast flow control valves located
under the tray of the Classic Bottle. Choose desired flow rate and insert into
the Emulait Nipple before use.
You may notice that the nipple compresses during feeding. This is due to
suction from the baby’s latch and does not affect the flow of milk.
- Insert flow control valve
Insert flow control valve into the Emulait Nipple and push it into place
- Fill the bottle and attach nipple on to bottle base with flow control valve inserted
How to Hold Bottle
How to Disassemble for Oeaning
-
Detach nipple and base
-
Remove flow control valve
Lightly press down on nipple to remove flow control valve
- Invert nipple
To ensure a thorough cleaning, use the Emulait bottle brush to clean between fibres
Cleaning and Sterilizing
Fully disassemble all parts. Wash all parts in hot water and soap. Rinse and
dry thoroughly, ensuring all cavities are clean.
All parts are dishwasher safe (top rack only), and safe for use in an electric
sterilizer, microwave sterilizer or boiling water. Use sterilizing solutions
or sterilizers strictly according to the manufacturer’s instructions. Steam
can cause severe skin burns, use caution when boiling on the stove or using
any sterilizing equipment. Avoid unnecessary handling of sterilized items and
equipment.
For Your Child’s Safety and Health
WARNING!
Always check food temperature before feeding.
Dispose of bottle components at the first signs of damage or structural
weakness.
Keep components not in use out of the reach of children.
Remove from your baby’s mouth when the baby is not feeding. Always use this
product with adult supervision.
Always check the nipples for signs of wear and replace when damaged. .
Do not use a microwave oven to heat the bottle as microwave ovens can create
hotspots in milk/formula and/or bottle components.
The bottle components are not toys and should not be given to children to play
with or suck on.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>