emulait Nipple 2-Pack Breastfeeding Bottles Instruction Manual
- June 13, 2024
- Emulait
Table of Contents
emulate Nipple 2-Pack Breastfeeding Bottles
What’s Included
Before First Use
Clean hands and surfaces thoroughly before handling. Sterilize the Emulait
Nipples in boiling water for about five minutes. Let them cool and dry before
use.
How to Assemble
Flow Control
Emulait Nipples must be used with a flow control valve inserted to prevent collapse. Choose the desired flow rate and insert it into the Emulait Nipple before use. You may notice that the nipple compresses during feeding. This is due to suction from the baby’s latch and does not affect the flow of milk.
- Insert flow control valve.
- Fill the bottle and attach the nipple to the bottle base with the flow control valve inserted
How to Disassemble for Deaning
- Detach nipple and base
- Remove the flow control valve
- Invert nipple
Cleaning and Sterilizing
Fully remove the Emulait Nipple from your Emulait Bottle. Wash nipple in hot water and soap. Rinse and dry thoroughly. The Emulait Nipples are dishwasher safe (top rack only), and safe for use in an electric sterilizer, microwave sterilizer, or boiling water. Use sterilizing solutions or sterilizers strictly according to the manufacturer’s instructions. Steam can cause severe skin burns, use caution when boiling on the stove or using any sterilizing equipment. Avoid unnecessary handling of sterilized items and equipment.
For Your Child’s Safety and Health
WARNING!
Inspect carefully before every use. Always check the Emulait Nipples for any tears or signs of damage. Dispose of the Emulait Nipples at the first signs of damage or weakness. When not in use, keep the Emulait Nipples out of the reach of children. Always use this product with adult supervision. The Emulait Nipples should only be used for bottle feeding and should not be given to children to play with or teethe.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>