CETPRO Medicine Cabinet Installation Guide

CETPRO Medicine Cabinet

Specifications

• Product: High-Quality Medicine Cabinet
• Manufacturer: GetProHome
• Contact: 626-679-3588 / service@getprohome.com

Product Usage Instructions

Tools Required for Installation:

• 1/4 & 1/8 Drill Bits
• Level
• Tape Measure
• Safety Goggles
• Mallet
• Power Drill

Product Function Instructions

1. Touch the key to turn on/off the defogging function. The button should be blue when the defogger is on.
2. The lighting color temperature changes with each short press.
3. Click the light button to turn on and change the color to white. Click again to change the light color. Click the fourth time to turn off the light.
4. Long press to adjust the brightness. Long press again to make the light gradually dim or brighten.
5. Memory function: The cabinet will remember the color temperature and brightness of your last use.

Do Not Return the Product to the Store. Contact the service team with any questions

USE AND MAINTENANCE

• The interior is constructed of mirrored glass and aluminum.
• Use only a damp cloth to clean. Ammonia or vinegar-based cleansers can damage mirrors.
• When cleaning, spray the cloth, not the mirror, or surrounding surfaces.
• Do not use abrasive cleansers on any part of the light fixture.

EXTENDED WARRANTY SERVICE
Please send your Purchasing Order No. to service@bestgosupplychaininc.com to register an extended 2-year warranty on hardware components. We pride ourselves on a 100% Customer Satisfaction Guarantee.
We are confident in our products and stand behind them 100%. Just reach out to us with any questions or concerns and we will be happy to help in less than 24 hours!

IMPORTANT NOTICE

• We will guarantee all customer benefits. The products we ship out are brand new. Please check carefully before installation, and compare all parts with the parts listed in the package contents section. If any part appears missing or damaged, do not install it.
• Contact customer service by E-mail: service@bestgosupplychaininc.com
• Send us the pictures or video, and we promise will respond to you within 24 hours. We will decide to send you spare parts or deliver a replacement for free.

TOOLS REQUESTED

INSTALLATION PACKAGE KIT INCLUDED

PRODUCT FUNCTION INSTRUCTIONS

• Touch key to turn on/off the defogging function. When the defogger is on, the button should be in blue.
• The anti-fog function can only be used after 5 minutes of turning on, and will automatically cancel after 60 minutes of standby. If extended use is required, it must be re-enabled.
• After power on, the button shows blue and it is in a waiting state

The lighting color temperature will be changed with each short press.

• Click the light button to turn it on and the color changes to white
• Click again to change the light color
• Click the fourth time to turn off the light

Long press to adjust the brightness

• Long press to make the light gradually dim
• Long press again and the light gradually brightens

When you adjust to your favorite color temperature, long press the button, and you can adjust the brightness of the color temperature, click again, you can adjust to another color temperature.

Memory function: The medicine cabinet will record the color temperature and brightness of your last use. When you turn off the color and brightness anfer using it last time, when you use it again, it will return to the state you used last time, no need to adjust it again and waste time every time.

When using an electrical furnishing, basic precautions should always be followed, including the following:

• WARNING : To reduce the risk of burns, fire, electric shock or injury to persons. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. Never drop or insert any object into any opening. Do not use outdoors.
• WARNING: Risk of electric shock. Connect this furnishing to a properly grounded circuit only. See grounding instructions.
• CAUTION: Maximum shelf load 34lbs/15.4kg

80-inch Installation

Step 1
Unpack all the packaging, take out the mirror cabinet and put it together to measure the total size of the mirror cabinet combination

step 2

• Level and mark the cabinet’s location on the wall. Fix Top Mounting Bracket on the Wall
• Measure the distance between the holes in the Top Mounting Bracket.

Step 3
Hanging the Cabinet on the top mounting bracket. Make sure top brackets are locked in the grooves.

Step 4
Connect the wire to the Junction Box inside the wall.

The electric wire comes through the access hole on the top of the cabinet exact location of access hole varies depending on the product models. Please refer to the actual product for the exact location.

ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN.

WARNING : Shut off power before wiring the cabinet. Requires 120 VAC 20 Amp GFI protected Circuit.

GROUNDING INSTRUCTIONS

• CAUTION : This product must be connected to a grounded metal permanent wiring system or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the product.
• WARNING : An Electrical option cabinet must be wired to a 20 Amp GFI (Ground Fault Interrupter) protected circuit when used in bathrooms and all other locations required by the National Electric Code.

Step 5: Move the cabinet to the right position and screw in the bottom supporting bracket and fix it. Step 6: According to you own needs and preferences, adjust and install the height of the glass shelves, first insert the transparent glass clip, then put the glass shelves on the clip, pay attention to the level of the glass.

Step 7: If the cabinet door does not close well or unbalanced, it is necessary to adjust the hinge.

OPTIONAL DOOR ADJUSTMENT

• Doors may need to be adjusted after the initial shipping of the cabinet. The cabinet doors have a three-way adjustment feature.
• Height, side-to-side, level, and depth can be adjusted. With the hinge slightly closed you can access the middle screw for up/down adjustment.
• With the hinge fully extended you can access the front and back screws. These screws will move the door side to side and in and out

INSTALLATION VIDEO

Missing Part or Defective?

• Please Contact the Customer Service Team
• service@getprohome.com
• 8 626 679 3588
• www.getprohome.com
• 626-679-3588
• service@getprohome.com

Frequently Asked Questions

• Q: What should I do if a part is missing or defective?
  • A: Contact GetProHome at 626-679-3588 or email service@getprohome.com for assistance with missing or defective parts.

References

• Kitchen Sink, Bathroom Mirrors, Shower Doors, Bathtubs – GETPROHOME

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>