CETPRO High Qulity Medicine Cabinet Instruction Manual
- June 15, 2024
- CETPRO
Table of Contents
INSTALLATION MANUAL
HIGH QULITY MEDICINE CABINET
BUILD FOR LUXURY LIFE SPACE
High Qulity Medicine Cabinet
CREATE YOUR LUXURY BATHROOM SPACE
ACCORDING TO YOUR BATHROOM SPACE AND DESIGN NEEDS, YOU CAN FREELY COMBINE THE
SIZE WHICH SUITABLE FOR YOU.
MORE STYLE COLLECTIONS FOR YOU
PRODUCT FUNCTION INSTRUCTIONS
- Touch key to turn on/off defogging function.When defogger is on, the button should be in blue color.
- Single click to turn ON/OFF the defogging function. The anti-fog function will be actived after you turn ON 5 mins. It will automatically turn off after one hour to prevent the mirror from overheating and save energy. If you want to extend use, you have to turn ON again.
ON/OFF, Brightness Control, and Color Temperature Selection
-
The lighting color temperature will be changes with each short press
-
Click the light button to turn on and the color changes to white
-
Double click to select among three color temperatures.
-
Press and hold the button to adjust the brightness.
-
Long press to make the light gradually dims
-
Long press again and the light gradually brightens
When you adjust to your favorite color temperature, long press the button, you
can adjust the brightness of the color temperature, click again, you can
adjust to another color temperature.
Memory function: The mirror cabinet will record the color temperature and
brightness of your last setting. it will remain the same brightness and color
temperature as the last settings before it was turned off, no need to adjust it
again and waste time every time.
BEFORE INSTALLATION
Thank you for choosing BESTGO products. To ensure the best experience,
pleaseread carefully and follow the instructions provided below before
assemblingand installing the product.
1. Pre-assembly
- Inspect the product immediately upon receipt for any transit damage or missing parts.
- The voltage for your BESTGO product should be between 100V and 120V If the voltage exceeds 120V, please use a transformer.
- You can connect the wires directly to your junction box or plug.
2. Important Safety Instructions
- Assemble the product by two or more adults to ensure proper installation.
- To connect the wires to the electrical junction box, a qualified technician or electrician is highly recommended.
- Disconnect power before installing, adding, or changing any components.
- Make sure that the fixing location can support the weight of the entire fixture (e.g, solid stone or brick walls).
- To prevent injury, the mirror cabinet must be installed according to the instructionsprovided.
3. Before installation
Please check and make sure that the mirror cabinet is functioning properly.
IMPORTANT NOTICE
We will guarantee all customer benefit. The products we ship out are brand new.
Please check carefully before installation, compare all parts with the parts
listed in the package contents section. If any part appears missing or
damaged, do not install.
Contact customer service by E-mail:
service@bestgosupplychaininc.com
Send us the pictures or video, we promise will response to you with 24 hours.
We will decide send you spare parts or deliver a replacement by free.
SPECIFICATIONS
| PARAMETER | SPECIFICATION |
|---|---|
| Color Temperature | 3000K-6500K |
| Input Voltage | AC100-120V |
| Output Voltage | 12V DC |
| CRI | ≧90 Ra |
| Working Temperature | -20 ∼ 45°C |
| Life Span | 50000 hours |
| Anti-fog | Yes |
| Nema Rate | 3 |
| Wiring Method | Hardwired /Plug-in |
| Switch | Touch Sensor |
Warranty: 1 years from the date of purchase
TOOLS REQUESTED
INSTALLATION PACKAGE KIT INCLUDED
Do Not Return Product to the Store. Contact service team with any questions
service@bestgosupplychaininc.com
USE AND MAINTENANCE
The interior is constructed of mirrored glass and aluminum.
Use only a damp cloth to clean. Ammonia or vinegar-based cleansers can damage
mirrors.
When cleaning, spray the cloth, not the mirror, or surrounding surfaces.
Do not use abrasive cleansers on any part of the light fixture.
EXTENTED WARRANTY SERVICE
Please send your Purchasing Order No. to
service@bestgosupplychaininc.com
to register extended 2 years warranty on hardware components. We provide
ourselves with a 100% Customer Satisfaction Guarantee. We are confident in our
products and stand behind them 100%, Just reach to us with any questions or
concerns and we will be happy to help in less than 24 hours!
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be
followed, including the following:
WARNING: To reduce the risk of burns,fire,electric shock or injury to
persons. Use this furnishing only for its intended use as described in these
instructions. Do not use attachments not recommended by the manufacturer.
Never drop or insert any object into any opening.Do not use outdoors.
WARNING: Risk of electric shock. Connect this furnishing to a properly
grounded circuit only. See grounding instructions.
CAUTION: Maximum shelf load 34lbs/15.4kg
60 inch Installation
Step 1
Unpack all the packaging, take out the mirror cabinet, and put it together
to measure the total size of the mirror cabinet combination
Step 2
Level and mark the cabinet’s location on the wall.
Fix Top Mounting Bracket on the Wall Measure the distance between the holes in
the Top Mounting Bracket.
Step 3
Hanging the Cabinet on the top mounting bracket. Make sure top brackets are
locked in the grooves.
Step 4
HARDWIRED:
Connect the head of plug and hardwire it into an outlet.
Black wire — power supply L(LIVE)
White wire — power supply N(NEUTRAL)
Green wire — power supply E (EARTH)
WARNING: This mirror must be earthed.
WARNING: This mirror must be earthed.
REMINDER: Please make sure the power is cut off before installation.
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN.
WARNING: Requires 120 VAC 20 Amp GFI protected Circuit.
GROUNDING INSTRUCTIONS:
CAUTION: This product must be connected to a grounded metal permanent wiring
system or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment grounding terminal or lead on the
product.
WARNING: An Electrical option Mirror must be wired to a 20 Amp GFI
(Ground Fault Interrupter) protected circuit when used in bathrooms and all
other locations required by the National Electric Code.
Step 5
Move the cabinet to the right position and screw in the bottom supporting
bracket and fix it.
Step 6
According to you own needs and preferences, adjust and install the height of
the glass shelves, first insert the transparent glass clip, then put the glass
shelves on the clip, pay attention to the level of the glass.
Step 7
If the cabinet door does not close well or unbalanced, it is necessary to
adjust the hinge.
60 inch Installation
Step 1
Unpack all the packaging, take out the mirror cabinet, and put it together to
measure the total size of the mirror cabinet combination
Step 2
Level and mark the cabinet’s location on the wall.
Fix Top Mounting Bracket on the Wall
Step 3
Hanging the Cabinet on the top mounting bracket. Make sure top brackets are
locked in the grooves.
Step 4
HARDWIRED:
Connect the head of plug and hardwire it into an outlet.
Black wire — power supply L(LIVE)
White wire — power supply N(NEUTRAL)
Green wire — power supply E (EARTH)
WARNING: This mirror must be earthed.
WARNING: This mirror must be earthed.
REMINDER: Please make sure the power is cut off before installation.
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN.
WARNING: Requires 120 VAC 20 Amp GFI protected Circuit.
GROUNDING INSTRUCTIONS:
CAUTION: This product must be connected to a grounded metal permanent wiring
system or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment grounding terminal or lead on the
product.
WARNING: An Electrical option Mirror must be wired to a 20 Amp GFI
(Ground Fault Interrupter) protected circuit when used in bathrooms and all
other locations required by the National Electric Code.
Step 5
Move the cabinet to the right position and screw in the bottom supporting
bracket and fix it.
Step 6
According to you own needs and preferences, adjust and install the height of
the glass shelves, first insert the transparent glass clip, then put the glass
shelves on the clip, pay attention to the level of the glass.
Step 7
If the cabinet door does not close well or unbalanced, it is necessary to
adjust the hinge.
50 inch Installation
Step 1
Unpack all the packaging, take out the mirror cabinet, and put it together to
measure the total size of the mirror cabinet combination
Step 2
Level and mark the cabinet’s location on the wall.
Fix Top Mounting Bracket on the Wall Measure the distance between the holes in
the Top Mounting Bracket.
Step 3
Hanging the Cabinet on the top mounting bracket. Make sure top brackets are
locked in the grooves.
Step 4
HARDWIRED:
Connect the head of plug and hardwire it into an outlet.
Black wire — power supply L(LIVE)
White wire — power supply N(NEUTRAL)
Green wire — power supply E (EARTH)
WARNING: This mirror must be earthed.
WARNING: This mirror must be earthed.
REMINDER: Please make sure the power is cut off before installation.
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN.
WARNING: Requires 120 VAC 20 Amp GFI protected Circuit.
GROUNDING INSTRUCTIONS:
CAUTION: This product must be connected to a grounded metal permanent wiring
system or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment grounding terminal or lead on the
product.
WARNING: An Electrical option Mirror must be wired to a 20 Amp GFI
(Ground Fault Interrupter) protected circuit when used in bathrooms and all
other locations required by the National Electric Code.
Step 5
Move the cabinet to the right position and screw in the bottom supporting
bracket and fix it.
Step 6
According to you own needs and preferences, adjust and install the height of
the glass shelves, first insert the transparent glass clip, then put the glass
shelves on the clip, pay attention to the level of the glass.
Step 7
If the cabinet door does not close well or unbalanced, it is necessary to
adjust the hinge.
40 inch Installation
Step 1
Unpack all the packaging, take out the mirror cabinet, and put it together to
measure the total size of the mirror cabinet combination
Step 2
Level and mark the cabinet’s location on the wall.
Fix Top Mounting Bracket on the Wall
Measure the distance between the holes in the Top Mounting Bracket.
Step 3
Hanging the Cabinet on the top mounting bracket. Make sure top brackets are
locked in the grooves.
Step 4
HARDWIRED:
Connect the head of plug and hardwire it into an outlet.
Black wire — power supply L(LIVE)
White wire — power supply N(NEUTRAL)
Green wire — power supply E (EARTH)
WARNING: This mirror must be earthed.
WARNING: This mirror must be earthed.
REMINDER: Please make sure the power is cut off before installation.
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN.
WARNING: Requires 120 VAC 20 Amp GFI protected Circuit.
GROUNDING INSTRUCTIONS:
CAUTION: This product must be connected to a grounded metal permanent wiring
system or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment grounding terminal or lead on the
product.
WARNING: An Electrical option Mirror must be wired to a 20 Amp GFI
(Ground Fault Interrupter) protected circuit when used in bathrooms and all
other locations required by the National Electric Code.
Step 5
Move the cabinet to the right position and screw in the bottom supporting
bracket and fix it.
Step 6
According to you own needs and preferences, adjust and install the height of
the glass shelves, first insert the transparent glass clip, then put the glass
shelves on the clip, pay attention to the level of the glass.
Step 7
If the cabinet door does not close well or unbalanced, it is necessary to
adjust the hinge.
40 inch Installation
Step 1
Unpack all the packaging, take out the mirror cabinet, and put it together to
measure the total size of the mirror cabinet combination
Step 2
Level and mark the cabinet’s location on the wall.
Fix Top Mounting Bracket on the Wall Measure the distance between the holes in
the Top Mounting Bracket.
Step 3
Hanging the Cabinet on the top mounting bracket. Make sure top brackets are
locked in the grooves.
Step 4
HARDWIRED:
Connect the head of plug and hardwire it into an outlet.
Black wire — power supply L(LIVE)
White wire — power supply N(NEUTRAL)
Green wire — power supply E (EARTH)
WARNING: This mirror must be earthed.
WARNING: This mirror must be earthed.
REMINDER: Please make sure the power is cut off before installation.
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN.
WARNING: Requires 120 VAC 20 Amp GFI protected Circuit.
GROUNDING INSTRUCTIONS:
CAUTION: This product must be connected to a grounded metal permanent wiring
system or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment grounding terminal or lead on the
product.
WARNING: An Electrical option Mirror must be wired to a 20 Amp GFI
(Ground Fault Interrupter) protected circuit when used in bathrooms and all
other locations required by the National Electric Code.
Step 5
Move the cabinet to the right position and screw in the bottom supporting
bracket and fix it.
Step 6
According to you own needs and preferences, adjust and install the height of
the glass shelves, first insert the transparent glass clip, then put the glass
shelves on the clip, pay attention to the level of the glass.
Step 7
If the cabinet door does not close well or unbalanced, it is necessary to
adjust the hinge.
30 inch Installation
Step 1
Unpack all the packaging, take out the mirror cabinet, and put it together to
measure the total size of the mirror cabinet combination
Step 2
Level and mark the cabinet’s location on the wall.
Fix Top Mounting Bracket on the Wall Measure the distance between the holes in
the Top Mounting Bracket.
Step 3
Hanging the Cabinet on the top mounting bracket. Make sure top brackets are
locked in the grooves.
Step 4
HARDWIRED:
Connect the head of plug and hardwire it into an outlet.
Black wire — power supply L(LIVE)
White wire — power supply N(NEUTRAL)
Green wire — power supply E (EARTH)
WARNING: This mirror must be earthed.
WARNING: This mirror must be earthed.
REMINDER: Please make sure the power is cut off before installation.
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN.
WARNING: Requires 120 VAC 20 Amp GFI protected Circuit.
GROUNDING INSTRUCTIONS:
CAUTION: This product must be connected to a grounded metal permanent wiring
system or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment grounding terminal or lead on the
product.
WARNING: An Electrical option Mirror must be wired to a 20 Amp GFI
(Ground Fault Interrupter) protected circuit when used in bathrooms and all
other locations required by the National Electric Code.
Step 5
Move the cabinet to the right position and screw in the bottom supporting
bracket and fix it.
Step 6
According to you own needs and preferences, adjust and install the height of
the glass shelves, first insert the transparent glass clip, then put the glass
shelves on the clip, pay attention to the level of the glass.
Step 7
If the cabinet door does not close well or unbalanced, it is necessary to
adjust the hinge.
20 inch Installation
Step 1
Unpack all the packaging, take out the mirror cabinet, and put it together to
measure the total size of the mirror cabinet combination
Step 2
Level and mark the cabinet’s location on the wall.
Fix Top Mounting Bracket on the Wall Measure the distance between the holes in
the Top Mounting Bracket.
Step 3
Hanging the Cabinet on the top mounting bracket. Make sure top brackets are
locked in the grooves.
Step 4
HARDWIRED:
Connect the head of plug and hardwire it into an outlet.
Black wire — power supply L(LIVE)
White wire — power supply N(NEUTRAL)
Green wire — power supply E (EARTH)
WARNING: This mirror must be earthed.
WARNING: This mirror must be earthed.
REMINDER: Please make sure the power is cut off before installation.
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN.
WARNING: Requires 120 VAC 20 Amp GFI protected Circuit.
GROUNDING INSTRUCTIONS:
CAUTION: This product must be connected to a grounded metal permanent wiring
system or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment grounding terminal or lead on the
product.
WARNING: An Electrical option Mirror must be wired to a 20 Amp GFI
(Ground Fault Interrupter) protected circuit when used in bathrooms and all
other locations required by the National Electric Code.
Step 5
Move the cabinet to the right position and screw in the bottom supporting
bracket and fix it.
Step 6
According to you own needs and preferences, adjust and install the height of
the glass shelves, first insert the transparent glass clip, then put the glass
shelves on the clip, pay attention to the level of the glass.
Step 7
If the cabinet door does not close well or unbalanced, it is necessary to
adjust the hinge.
E-Mail:service@bestgosupplychaininc.com
Hotline: 626 679 3588
Documents / Resources
|
CETPRO High Qulity Medicine
Cabinet
[pdf] Instruction Manual
High Qulity Medicine Cabinet, High, Qulity Medicine Cabinet, Medicine Cabinet,
Cabinet
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>