SCT RTK-AM1TM Transmitter Module RemoteTable Kit AM1 Instructions
- August 26, 2024
- SCT
Table of Contents
SCT RTK-AM1TM Transmitter Module RemoteTable Kit AM1
Product Specifications
- Transmitter Module: RTK-AM1TM
- Receiver Module: RTK-AM1TM
- Cable Included: SCTLink2TM Cable
- Connectivity: Ethernet/POE, Cisco Mic Pro, HDMI, Audio I/O & USB up to 100m CAT6A U/FTP
- Power Supply: WPS-48V4A 48VDC 100-240V 47-63Hz, WPS-12 30VDC 100-240V 47-63Hz
- Cable Specifications: SCTLink2TM Cable Specs Integrator-Supplied CAT6A U/FTP Cable EIA568A or EIA568B (10m-100m min/max Length)
Product Usage Instructions
Transmitter Module Setup
- Connect the Transmitter Module (RTK-AM1TM) to the power supply using the provided cable.
- Ensure a single, point-to-point CAT cable without couplers or interconnections is connected to the module.
- Connect the appropriate devices (Ethernet/POE, Cisco Mic Pro, HDMI, Audio I/O & USB) to the transmitter module.
Receiver Module Setup
- Connect the Receiver Module (RTK-AM1TM) to the power supply using the provided cable.
- Use the RJ45 to RJ45 UTP cable to establish a connection between the transmitter and receiver modules.
- Connect the receiver module to the desired output devices.
FAQs
Q: Can I use a different type of cable with the modules?
A: No, it is recommended to use the provided cables or cables meeting the specified requirements for optimal performance.
Q: What is the maximum length supported by the SCTLink2TM Cable?
A: The SCTLink2TM Cable supports lengths ranging from 10m to 100m based on EIA568A or EIA568B standards.
CONNECTION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>