EMOS EGS0101 Go Smart Digital wireless thermometer Owner’s Manual

August 26, 2024
EMOS

EMOS EGS0101 Go Smart Digital wireless thermometer

EMOS-EGS0101-Go-Smart-Digital-wireless-thermometer -PRODUCT-
IMAGE

Specifications

  • Dimensions: 56 mm x 23 mm
  • Control: Wi-Fi controlled clock
  • Time format: 12/24 h increments
  • Indoor humidity range: 0% to 99% RH, 1% increments
  • Connection: 2.4 GHz Wi-Fi (IEEE802.11b/g/n) / Zigbee 2402 ~ 2,480 MHz (not included)

Product Usage Instructions

Getting Started

  1. Insert three 1.5V AAA batteries into the thermometer, ensuring correct polarity.
  2. The Wi-Fi signal reception icon will start flashing.
  3. If the Wi-Fi icon does not flash, long-press the pairing button and complete the pairing process with the app.
  4. If the low battery icon appears on the screen, replace the batteries.
  5. To reset the thermometer if displaying incorrect values or not responding, remove and reinsert the batteries.

Mobile Application
The thermometer can be controlled via the EMOS GoSmart mobile app for iOS or Android.

Pairing with the App

  1. Download the EMOS GoSmart app.
  2. Log in or sign up and register if it’s your first time using the app.

Controls and Functions
Detailed description of controls and functions can be found in the user manual provided with the device.

Advanced Settings
To export measured data, tap the temperature/humidity history chart in the app’s main menu and follow the on-screen instructions.

FAQ

  • Troubleshooting FAQ
    For troubleshooting tips and common questions, refer to the user manual or contact customer support for assistance.

Safety Instructions and Warnings

  •  Read the user manual before using the device.
  • Follow the safety instructions in the manual.
  • Do not tamper with the internal electrical circuits of the product – doing so may damage the product and will automatically void the warranty. The product should only be repaired by a qualified professional.
  • To clean the product, use a soft damp cloth. Do not use solvents or detergents – they could scratch the plastic parts and cause corrosion of the electric circuits.
  • Do not use the device in the proximity of devices that generate electromagnetic fields.
  • Do not expose the product to excessive force, impact, dust, high temperatures or humidity – these may cause the product to malfunction or deform its plastic parts.
  • Do not insert any objects into the openings on the device.
  • Do not submerge the device in water.
  • Protect the device from falls or impacts.
  •  Only use the device in accordance with the instructions provided in this manual.
  • The manufacturer is not liable for damage caused by improper use of the device.
  • The appliance is not intended for use by persons (including children) whose physical, sensory or mental disability or lack of experience and expertise prevents safe use, unless they are supervised or instructed in the use of the appliance by a person responsible for their safety. Children must always be supervised to ensure they do not play with the appliance.

Technical Specifications

  • Wi-Fi controlled clock

  • Time format: 12/24 h

  • Indoor temperature: -10 °C to +60 °C, 0.1 °C increments

  • Temperature measurement accuracy: ±1 °C

  • Indoor humidity: 0 % to 99 % RH, 1 % increments

  • Humidity measurement accuracy: ±5 %

  • Connection: 2.4 GHz Wi-Fi (IEEE802.11b/g/n)/
    Zigbee 2402 ~ 2,480 MHz

  • Frequency band: 2.400–2.4835 GHz

  • Power supply: 3× 1.5V AAA batteries (not included)

  • Dimensions: 56 × 23 × 56 mm

Description of Icons and Buttons

  1. time
  2. indoor temperature
  3. date
  4. pairing button
  5. flat battery icon
  6. Wi-Fi signal reception
  7. indoor humidity
  8. hole for hanging
  9. battery compartment

EMOS-EGS0101-Go-Smart-Digital-wireless-thermometer -
\(4\)

Getting Started

  1. Insert three batteries (1.5V AAA) into the thermometer. When inserting the batteries, make sure the polarity is correct to avoid damaging the thermometer.
  2. The Wi-Fi signal reception icon will start flashing.
  3. If the Wi-Fi icon does not flash, long-press the pairing button and complete the pairing process with the app. If the screen shows the low battery icon in field no. 5 , replace the batteries.

Thermometer RESET
If the thermometer displays incorrect values or does not respond to button presses, remove the batteries, then reinsert them.

Mobile Application
EMOS-EGS0101-Go-Smart-Digital-wireless-thermometer -
\(6\)

The thermometer can be controlled using a mobile app for iOS or Android. Download the EMOS GoSmart app for your device.
Tap the Log In button if you’ve used the app before.
Otherwise, tap the Sign Up button and register.

Pairing with the App

EMOS-EGS0101-Go-Smart-Digital-wireless-thermometer -
\(7\) EMOS-EGS0101-Go-Smart-Digital-wireless-
thermometer - \(8\) EMOS-EGS0101-Go-Smart-
Digital-wireless-thermometer - \(9\) EMOS-EGS0101-Go-Smart-Digital-wireless-thermometer -
\(10\)

When you insert batteries into the thermometer, the Wi-Fi icon will start flashing.

  • If the Wi-Fi icon does not flash, press the pairing button for 5 seconds.
  • Tap Add Device in the app.
  • Tap the GoSmart list on the left and then the Thermo-Hygrometer EGS0101 icon.
  • Follow the instructions in the app and enter the name and password for your 2.4 GHz Wi-Fi network.
  • The pairing with the app will be completed within 2 minutes; the Wi-Fi icon will be permanently shown on the thermometer display.
  • Note : If the device fails to pair, repeat the process. 5 GHz Wi-Fi networks are not supported.

Inserting/Replacing Batteries

  1. Open the battery compartment cover on the backside of the thermometer.
  2. Remove the depleted batteries.
  3. Insert new 3× 1.5V AAA batteries. Make sure you observe the correct polarity.
  4. Close the cover.
    If batteries are protected by a safety film, remove it first.
    Only use alkaline batteries of the same type; do not use old and new batteries at the same time; do not use 1.2V rechargeable batteries.

Controls and Functions

Application Menu

  1. settings
  2. setting the scene and automation assigned to the device
  3. humidity history chart
  4. temperature history chart
  5. current temperature and humidity index
  6. current temperature
  7. advanced settings
  8. current humidity

Settings

  • Temperature alarm
    • Temperature alert.
    • Move the slider to the left/right to set the desired temperature.
    • The app will display a notification when the set temperature is reached
    •  Function activation –
    • Function deactivation –
  • Humidity alarm
    • Humidity alert.
    • Move the slider to the left/right to set the desired humidity.
    • The app will display a notification when the set temperature is reached.
    • . Function activation –
    • Function deactivation –
  • Battery level state
    • The status of the batteries in the device.
  • Unit convert
    • °C/°F temperature unit setting.
  • Temp calibration
    • Calibration of room temperature is used, for example, if the thermometer shows 21 °C but you want it to show 20 °C. In that case, the calibration value should be set to -1 °C.
    • Setting from -2.0 °C to +2.0 °C, in 0.1 °C increments.
  • Humidity calibration
    • Calibration of room humidity is used, for example, if the thermometer shows 20 % but you want it to show 21 %. In that case, the calibration value should be set to -1 %.
    • Setting from -10 % to +10 %, in 1 % increments.
  • Low battery alarm
    • If the batteries in the device are flat, the app will display a notification.
    • Function activation –
    • Function deactivation –  

Advanced Settings

  • Device information – basic information about the device
  • Tap-To-Run and Automation – scenes and automations assigned to the device
  • Offline notification – notifies when the device is offline for over 8 hours (e.g. power outage)
  • Share Device – shares control of the device with another person
  • Create Group – creates a group of similar devices
  • Faq and Feedback – frequently asked questions and feedback
  • Add to Home screen – adds an icon for the device on the phone’s home screen
  • Device Update – updates the device
  • Remove Device – unpairs the deviceEMOS-EGS0101-Go-Smart-Digital-wireless-thermometer - \(16\)

Export of Measured Data

  • Tap the temperature/humidity history chart in the app’s main menu.
  • Select a temperature or humidity measurement.
  • Select measurements within a day/month/year.
  • Use the left/right arrow at the bottom to select the exact date/month/year.
  • Tap the icon, enter your e-mail address and tap Confirm.
  • You will receive an email with a link to download the xlsx file; the link is valid for 7 days. EMOS-EGS0101-Go-Smart-Digital-wireless-thermometer - \(17\) EMOS-EGS0101-Go-Smart-Digital-wireless-thermometer - \(18\)

Troubleshooting FAQ

In place of temperature/humidity, the screen displays:

  • E1 – the measured value is outside the lower/upper measurement range
  • Move the device to a more suitable spot.

The screen is difficult to read
Replace the batteries.

The Wi-Fi icon is flashing

  • The thermometer is not paired with the app, repeat the pairing process.
  • The thermometer is not connected to the Wi-Fi network, check the functionality of the network.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals