ufesa 70205733 BS Rock Crystal Glass Blender Instruction Manual

: August 24, 2024
: UFESA

Table of Contents

ufesa 70205733 BS Rock Crystal Glass Blender
Product Information
Product Usage Instructions
Frequently Asked Questions
DESCRIPTION
SAFETY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS FOR USE
BLENDING WITH FUNCTION BUTTONS
MAINTENANCE AND CLEANING
PRODUCT DISPOSAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ufesa 70205733 BS Rock Crystal Glass Blender

Product Information

Product Specifications

Brand: BS Rock Crystal
Product Type: Blender
Model: BG AR
Capacity: Up to 1750 ml

Product Description

The BS Rock Crystal blender comes with various components:

A. Jar lid
- A1. Lid fastening clip
- A2. Lid handle
- A3. Lid flange
B. Measuring cup
C. Jar
- C1. Jar spout
D. Motor unit
E. Speed knob
- E1. ON/OFF button
- E2. Smoothie function button
- E3. Squeeze function button
- E4. Ice crush function button
- E5. Pulse function button
- E6. Self-clean function button
F. Rubber feet

Product Usage Instructions

Assembly Instructions:

How to remove/attach the jar lid (A):

To remove the jar lid, slightly move the lid fastening clip (A1) to the right. The lid handle (A2) will be released and then pulled out.
To attach the lid, align the lid flange (A3) with the jar spout (C1) and press it down until positioned. Then press down the lid handle (A2). It will click into the lid fastening clip (A1).

Note:
The jar lid must be closed well in position, otherwise, the appliance cannot be activated.

How to remove/attach the measuring cup (B):

To remove the measuring cup, turn it counterclockwise and pull it out.
To attach the measuring cup, align the measuring cup flanges, press it down, and turn it clockwise. It will click into position.

How to place the jar (C):
Hold the jar with the handle on its right side, place it into the motor unit (D), and turn it clockwise until the lock marks. It will click into place.

Lift the jar to check whether it is locking or not. To remove the jar, repeat the operation in reverse.

Maintenance and Cleaning:
Refer to the specific sections of the manual for maintenance and cleaning instructions.

Frequently Asked Questions

Q: What should I do if the supply cord is damaged?

A: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid hazards.

Q: How can I quickly measure small quantities with the blender?

A: Use the measuring cup provided with markings for 20/30/40ml. Turn it to remove or attach as needed.

Q: How can I ensure the blender is properly assembled?

A: Follow the assembly instructions provided in the manual carefully to ensure each component is correctly attached and locked into place.

WE WOULD LIKE TO THANK YOU FOR CHOOSING UFESA, WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.

WARNING
PLEASE READ THE INSTRUCTIONS FOR USE CAREFULLY BEFORE USING THE PRODUCT. STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE.

DESCRIPTION

A. Jar lid
- A1. Lid fastening clip
- A2. Lid handle
- A3. Lid flange
B. Measuring cup
C. Jar
- C1. Jar spout
D. Motor unit
E. Speed knob
- E1. ON/OFF button
- E2. Smoothie function button
- E3. Squeeze function button
- E4. Ice crush function button
- E5. Pulse function button
- E6. Self-clean function button
F. Rubber feet

SAFETY INSTRUCTIONS

If the supply cord is damaged it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. Res- pect the operating times of the accessories indica-ted in their specific sections of the manual. Proceed according to the maintenance and cleaning section of this manual for cleaning.

Warning:
potential injury from misuse! Care shall be taken when handling the sharp cutting blades, emptying the bowl, and cleaning. Be careful if hot liquid is poured into the blender as it can be ejected out of the appliance due to a sudden steaming. Always disconnect the blender from the supply if it is left unattended and before assembling, disassembling, or cleaning. Switch off the appliance and disconnect from the supply before changing accessories or approaching parts that move in use. This appliance shall not be used by children. Keep the appliance and its cord out of reach of children. Appliances can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and if they understand the hazards involved. Children shall not play with the appliance. This appliance is intended for use at a maximum altitude of 2000m above sea level.

IMPORTANT WARNINGS
This appliance is designed for home use and should never be used for commercial or industrial use under any circumstances. Any incorrect use or improper handling of the product shall render the warranty null and void. Before plugging in the product, check that your mains voltage is the same as the one indicated on the product label. The mains con-nection cable must not be tangled or wrapped around the product during use. Do not use the device or connect and disconnect to the supply mains with the hands and/or feet wet. To ensure the sealing effect of the blending blade, please do not allow the blending blade to work without load. Do not pull on the connection cord to unplug it or use it as a handle. Unplug the product immediately from the mains in the event of any breakdown or damage and contact an official technical support service. To prevent any risk of danger, do not open the device. Only qualified technical personnel from the brand´s Official technical support service may carry out repairs or procedures on the device.

B&B Trends, S.L. disclaims all liability for damages that may occur to people, animals, or objects, for the non-observance of these warnings.

ASSEMBLY INSTRUCTIONS

How to remove/attach the jar lid (A):

To remove the jar lid, slightly move the lid fastening clip (A1) to the right. The lid handle (A2) will be released and then pulled out.
To attach the jar lid, align the lid flange (A3) with the jar spout (C1) and press it down until positioned. Then press down the lid handle (A2). It will “click” into the lid fastening clip (A1). Note: The jar lid must be closed well in position, otherwise, the appliance cannot be activated.

How to remove/attach the measuring cup (B):
The measuring cup allows quick measurement of 20/30/40ml, ideal for some preparations:

To remove the measuring cup, turn it counterclockwise and pull it out.
To attach the measuring cup, align the measuring cup flanges, press it down, and turn it clockwise. It will “click” into position.

How to place the jar (C):
Hold the jar with the handle on its right side, place it into the motor unit (D), and turn it clockwise until the lock marks. It will “click” into place. Lift the jar to check whether it is locking or not. To remove the jar, repeat the operation in reverse.

INSTRUCTIONS FOR USE

Blending with speed knob

Lay the appliance on a flat horizontal surface and make sure it is unplugged.
Pour in the ingredients. The jar (C) is graduated with different weight marks for easy use.
| ML| L| OZ| CUPS
---|---|---|---|---
Weight mark 1| 500| 0.5| 16| 2
Weight mark 2| 750| 0.75| 24| 3
Weight mark 3| 1000| 1| 32| 4
Weight mark 4| 1250| 1.25| 40| 5
Weight mark 5| 1500| 1.5| 48| 6
Weight mark 6 (MAX)| 1750| 1.75| 59| 7.4

The amount of mixture should never exceed the maximum capacity as indicated on the jar. Note: Never use hot liquids or run the appliance empty.

Place the jar lid (A) and measuring cup (B) well in position. Please refer to the above section of this manual.
Install the jar (C) onto the motor unit (D), and make sure that the jar is installed well in posi-tion. Please refer to the above section of this manual.
Plug in the appliance. The ON/OFF button (E1) LED light will flash.
Press the ON/OFF button (E1) and rotate the speed knob (E) to which speed you need from 1 to 9. You can change the speed at any time while operating by rotating the speed knob (E).
At the end of preparation, press again the ON/OFF button (E1) or rotate the speed knob (E) to speed 0, unplug the appliance, and wait until the blades come to a complete stop. 8. Remove the jar (C) and take off the lid (A), then pour out the ingredients.

Note:
Each time cannot work more than 3 minutes. Cool down the appliance 30 minutes before the next operation in case the motor overheats.

BLENDING WITH FUNCTION BUTTONS

Proceed according to steps 1 to 5 in section “blending with speed control”. The function buttons led lights will flash and different programs could be selected. The speed can-not be adjusted in the below modes. During the working process, if you want to make the appliance stop working before it finishes, you can press the function button or ON/OFF button (E1) again.
Smoothie: Press the “smoothie” button (E2). It will work close to variable power for 60 seconds. Ideal for making fruit and vegetable shakes.
Squeeze: Press the “squeeze” button (E3). It will work close to variable power for 60 se-conds. Ideal for egg yolk or more consistent cold creams in general.
Ice crush: Press the “ice crush” button (E4). A cycle is working and all process will last for 30 seconds. Ideal for slushes or mojitos. Please note the recommended solid ice cubes per use are 8 pieces with a size of 15mm x 15mm x 15 mm and the proportion of the ice and water is 2:3.
Pulse: Press the “pulse” button (E5). The appliance will work at maximum speed until you release it.

MAINTENANCE AND CLEANING

Before cleaning, always turn off the appliance and unplug it from the power supply.
Do not immerse the appliance and power cord in water or other liquids or wash them in the dishwasher.
Wipe off the appliance with a damp cloth and a little dish washing detergent. Do not use any abrasive scouring agents, steel wool, metal objects, hot cleaning agents or disinfectants, since they can damage the appliance.
During the cleaning process, special care must be taken with the blades and they are very sharp.
It is recommended to clean the appliance regularly and remove all traces of food.
If the appliance is not maintained in good cleaning condition, its surface can degrade and inexorably affect the life of the appliance and lead to a dangerous situation.
The following parts are suitable for cleaning in the dishwasher: jar, jar lid, blades and mea-suring cup.

Self-cleaning function (E6)

After use, reassemble the jar and pour about 400-500ml warm water and a small amount of detergent into it.
Plug in the appliance. The ON/OFF button (E1) LED light will flash. Press the “clean” button (E6) to perform the auto cleaning.
After finish cleaning, the appliance will stop working automatically and the indicators of five buttons will turn to blink.
Unplug the appliance and then remove the jar from the motor unit, then rinse the jar under running water.

Removable blades for effective cleaning

Loosen the fixing ring of the blades by turning it clockwise until the unlock mark. Remove the fixing ring from the blades and clean all the parts.
Once clean, replace the blade assembly and turn the blade fixing ring in the opposite direction.

Table of recipes

Load	Time	Function button
Soaked carrots: 700g Water: 1050g	3’	Speed knob (E)/ Pulse

Banana smoothie:

Milk: 1/3 of rated capacity Banana: 1/6 of rated capacity (cut into 2cm in length)

Ice cube: 5 units of 252525mm White sugar: 2 spoons

| ****

1’

| ****

Smoothie

Egg yolk:

Egg: 6 units

| 1’| Squeeze
Ice crush:

Ice cube: 8 units of 151515mm

The proportion of the ice and water is 2:3

| ****

30”

| ****

Ice crush

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste electrical and electronic equipment), which establishes the applicable legal framework in the European Union regarding the elimination and recycling of electrical and electronic devices. Do not put this product in the bin. Take it to your closest electrical and electronic waste treatment center.

WARRANTY REPORT
B&B TRENDS, SL. guarantees compliance of this product, for the use for which it is, during the period established by the legislation in force in the country of sale. In the case of a breakdown during the term of this warranty, users are entitled to repair or else the replacement of the product at no charge if the former is unavailable unless one of these options proves impossible to fulfill or is disproportionate. In this case, you can then opt for a reduction in price or cancellation of the sale, which must be dealt with directly with the sales vendor. This also covers the replacement of spare parts provided that the product has been used according to the recommendations specified in this manual for both cases and has not been tampered with by any third party that is not authorized by B & B TRENDS, SL. The warranty will not cover any parts subject to wear and tear. This warranty does not affect your rights as a consumer per the provisions in Directive 1999/44/EC for European Union member states.

USE OF WARRANTY
Customers must contact a B&B TRENDS, SL., authorized Technical Service for the repair of the product. Any tampering of the same by anyone not authorized by B&B TRENDS, SL., or the careless or improper use of the same shall render this warranty null and void. You must keep the purchase invoice, receipt, or delivery docket in order to exercise your warranty rights.
For technical service and after-sales care outside the Spanish territory, please submit your query to the point of sale where you purchased the item.

Check out your nearest service station at https://sat.ufesa.com/.