Senmeo L-018 Bladeless Fan User Manual
- August 24, 2024
- Senmeo
Table of Contents
- Senmeo L-018 Bladeless Fan
- Product Usage Instructions
- EXTEND YOUR WARRANTY FOR FREE
- IMPORTANT SAFETY INSTRUCTIONS
- Specifications
- Product Diagram
- Remote Control
- Other Features
- Replacement of Batteries
- CLEANING AND MAINTENANCE
- TROUBLESHOOTING
- WARRANTY AND SERVICE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Senmeo L-018 Bladeless Fan
Specifications
- Model: UML-018
- Product Size: 151555cm
- Rated Power Input: 20-35W AC 220-240V50Hz
- Remote Control Battery: CR2025, 3V
Product Usage Instructions
Package Contents
- 1 x Bladeless Fan
- 1 x Remote Control
- 1 x User Manual
Product Diagram
- Air duct
- Air outlet
- Fan body
- Air inlet
- Display and touch key
Display and Touch Key
Base
Note: The display includes both the screen and operating buttons.
Power ON/OFF
Tap the touch key to turn on the fan. The default speed level is 5. Tap to
start the fan, and tap to adjust the speed level from 1-8, H, L.
Remote Control
Note: All functions can be controlled using the remote.
- On/Off
- Mode
- Oscillation
- Wind speed –
- Mute
- Timing
- Wind speed +
Operations and Functions
Place the fan on a flat, obstruction-free surface, plug it into a suitable AC
220-240V outlet. The unit will enter standby mode with a beep, indicating it
is ready for use.
Frequently Asked Questions (FAQ)
-
Q: How do I clean my bladeless fan?
A: Refer to the Cleaning and Maintenance section in the user manual for detailed instructions on cleaning your bladeless fan. -
Q: Can I use the fan outdoors?
A: No, the fan should only be used in dry indoor environments according to safety instructions. -
Q: What should I do if my fan stops working?
A: Refer to the Troubleshooting section in the user manual for steps to diagnose and potentially fix any issues with your fan.
Bladeless Fan
User Manual
Thanks for Choosing
Your support means the world to us. We hope you enjoy our product as much as
we did creating it.
EXTEND YOUR WARRANTY FOR FREE
In the unlikely event of a product failure, we offer a 12-month warranty for
peace of mind. In addition, we will extend the warranty period for another 12
months if you provide us with your order number via e-mail
uk-support@senmeo.com
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of electric shock or personal injury, the following basic
precautions should be strictly observed when using electrical products.
WARNING: Do not cover the fan.
- Read all instructions before using this fan;
- Children, elderly, or disabled persons, as well as those unfamiliar with operating the fan, should use it under supervision and guidance. Children should only access the fan under supervision to prevent it from being used as a toy;
- A separate socket with rated current matching with the current of the fan shall be used, and using a universal socket or sharing the socket with other electrical appliances is not allowed;
- If the fan does not work, the power must be cut off before repair and repair must be done by professional personnel;
- Do not move the fan with the power supply connected;
- Hold the plug when disconnecting the power plug, and do not pull the power cord;
- In case of damage to the power cord, to prevent hazards, the damaged cord must be replaced by professional personnel from the manufacturer or their maintenance department;
- Do not stretch or tighten the power cord, and keep the power cord away from overheated surfaces;
- Do not run a fan with a carpet covering over, and do not cover the fan with a rag, other devices or similar materials. The power cord shall be arranged away from frequently accesses and place in an area seldom access area to prevent tripping hazards;
- Turn off all operating devices before unplugging;
- When the fun will not be used for a long time, disconnect the plug from the socket;
- Keep the power cord properly so as to prevent tripping hazards;
- Do not put any objects at the air inlet or outlet, and make sure the air inlet and outlet are free from blocking and free of dust, lint, hair and any other obstacles that may hinder the air flow;
- The fan should be placed on a level surface in a well ventilated and dry environment away from the heat source and free of corrosive gas, a clearance of 150mm shall be reserved around to ensure air flow;
- The fan shall be placed and used in dry places, and cannot be used outdoors or on wet surfaces;
- Immersing the fan, power cord and power plug in water or other liquids is strictly prohibited, otherwise, it may result in hazards. Do not use other extension power cords except for the case of inspection by a professional person;
- Do not place an air freshener or similar products next to the fan, do not use any detergent or lubricant to clean or maintain the fan, and the power plug must be disconnected before any cleaning or maintenance.
Specifications
USE YOUR FAN
Package Contents
- 1 x Bladeless Fan
- 1 x Remote Control
- 1 x User Manual
Product Diagram
Display and Touch Key
Note:The display is not only the screen but also the operating buttons.
Power ON/OFF
- Tap the touch key to open the fan, the fan is at speed level 5 by default upon initial starting after restoration of power if the power has been disconnected.
- Tap the touch key to start the fan, and the air flow speed corresponds to the speed level before the fan enters the ready mode.
- Tap the touch key on the main unit to adjust the speed level cyclically from level 1-8, H, L.
- Press and hold the touch key for 4 seconds to turn it off. Oscillation Function
- In the operating mode, press and hold the touch key for 2 seconds to enter the oscillation function, plus the fan starts to oscillate 90°left and right;
- Again press and hold the touch key for 2 seconds to cancel the oscillation.
Remote Control
Note: All the functions can be achieved through the buttons on the remote control.
Operations and Functions
Place the fan on a firm, level surface free from obstructions, plug into an
appropriate voltage AC 220-240V outlet, the unit will enter standby mode with
a beep. Your fan is ready for use now.
Other Features
Memory Function|
- The fan is designed with memory function. It will always remember your last settings (modes, speeds) once you turn it on again.
- This function is only available when the power plug is not unplugged. If the power plug is reconnected, the default setting is 5 speed.
---|---
Auto LED Display Off|
- If no operation is done within 30s. after powered on, the display will turn off automatically .
- To turn the display back on, press any button to wake it up.
Replacement of Batteries
- Use a screwdriver to unscrew the small screws on the remote control cover.
- Slide and remove the battery cover from the remote control.
- Prepare a button battery with the lettered side facing up, and install the button battery into the remote control.
Caution
-
Chemical Burn and Choking Hazard. Keep batteries away from children.
This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compart-ment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. -
Dispose of cells properly and keep away from children. Even used cells may cause injury.
CLEANING AND MAINTENANCE
We recommend cleaning the fan at least once during the operating season and before the off season.This will ensure optimal performance.
Always disconnect the appliance from the mains by switching it off and removing the plug from the power outlet before cleaning.
- Use only a soft cloth to gently wipe the outer surfaces of the fan clean.
- Do not use any cleaning agents or detergents.
- Never immerse the fan in water and never allow water to drip into the motor housing.
- For storage, you may leave the fan covered to protect it from dust. Store it in a cool, dry location and arrange the cable away from traffic areas so that it will not be tripped over or damaged.
Caution
- Do not allow water to run into the interior of the fan as this could result in a fire or electric shock hazard.
- Any other servicing should be performed by an authorized service representative.
- Except cleaning, any other servicing should be performed by an authorized service representative.
- Carefully fold the power supply cord and tie it up with a cord, then put the fan into the packing box. Keep it in a cabinet away from any hot or wet location.
TROUBLESHOOTING
The following troubleshooting guide addresses the most common problems. If problems persist, contact the Customer Support at uk- support@senmeo.com
| Problem | Possible Causes | Solution |
|---|---|---|
| Malfunction Codes on LED Display | E1 – Excessive current | Unplug and retry, if |
this does not work contact customer support.
E2 – Motor blocking protection| Unplug and retry, if this does not work
contact customer support.
E3 – Motor phase loss protection| Unplug and retry, if this does not work
contact customer support.
E4 – High or low voltage protection| Unplug and retry, if this does not work
contact customer support.
| Power cord is not properly plugged in.| Connect the plug to a powered
electrical outlet.
Fan does| |
not start| No power is passing through the unit.| Ensure that your circuit
breaker or fuse is working properly.
| The battery is drained.| Replacing the battery.
The remote control does not work.| The battery is installed in the wrong
direction.| Make sure the battery is installed with the “+” sign facing up.
If it still does not work after replacing the battery, please contact customer
service.
WARRANTY AND SERVICE
Default 12-Month Warranty
This product is covered with Senmeo product and labor warranty for 12 months
from the date of its original purchase.
Extend Your Warranty
Contact us by email uk-support@senmeo.com
with the correct order number and the warranty will be extended for a further
12 months.
The warranty will not apply in cases of:
- Accident, misuse, or repairs performed by unauthorized personnel.
- Any unit that has been tampered with or used for commercial purposes.
- Normal wear and tear of wearable parts.
- Use of force, damage caused by external influences.
- Damage caused by non-observance of the User Guide, e.g. connection to an unsuitable mains supply or non-compliance with the instructions.
- Partially or completely dismantled appliances.
- Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by Senmeo.
We can only provide after-sales service for products that are sold by Senmeo or Senmeo authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.
We’re Here to Help!
uk-support@senmeo.com
Zhejiang Youmeilai Intelligent Technology Co., Ltd.
- Please have your order confirmation number ready before contacting Customer Support.
We’re Here to Help!
Contact our customer support!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>