Senmeo L-018 Blade Less Fan for Bedroom User Manual

: August 21, 2024
: Senmeo

Table of Contents

Senmeo L-018 Blade Less Fan for Bedroom
Product Information
Product Usage Instructions
IMPORTANT SAFETY INSTRUCTIONS
Specifications
Package Contents
Product Diagram
Display and Touch Key
Remote Control
Operations and Functions
Other Features
Replacement of Batteries
CLEANING AND MAINTENANCE
TROUBLESHOOTING
WARRANTY AND SERVICE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Senmeo L-018 Blade Less Fan for Bedroom

Product Information

Specifications

Model: UML-018
Product Size: 151555cm
Rated Power Input: 20-35W AC 120V60Hz
Remote Control Battery: CR2025, 3V

Product Usage Instructions

Using Your Fan

Package Contents

1 x Bladeless Fan
1 x Remote Control
1 x User Manual

Product Diagram

Air duct
Air outlet
Fan body
Air inlet
Display and touch key

Display and Touch Key

Power ON/OFF:
- Tap the touch key to open the fan. The default speed level is 5.
- To adjust the speed level, tap the touch key on the main unit to cycle through levels 1-8, H, L.
Cleaning and Maintenance
Refer to the user manual for detailed instructions on cleaning and maintaining your bladeless fan.
Troubleshooting
If you encounter any issues with your fan, refer to the troubleshooting section in the user manual for guidance.
Warranty and Service
We offer a 12-month warranty for peace of mind. Extend your warranty by providing us with your order number via email.

FAQ

Q: Can the fan be used outdoors?
A: No, the fan should be placed and used in dry places only.
Q: How do I adjust the speed level of the fan?
A: You can adjust the speed level by tapping the touch key on the main unit to cycle through levels 1-8, H, L.

Thanks for Choosing Senmeo
Your support means the world to us. We hope you enjoy our product as much as we did creating it.

EXTEND YOUR WARRANTY FOR FREE
In the unlikely event of a product failure, we offer a 12-month warranty for peace of mind. In addition, we will extend the warranty period for another 12 months if you provide us with your order number via e-mail (sup- port@senmeo.com).

support@senmeo.com.

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of electric shock or personal injury, the following basic precautions should be strictly observed when using electrical products.
WARNING: Do not cover the fan.

Read all instructions before using this fan;
Children, elderly, or disabled persons, as well as those unfamiliar with operating the fan, should use it under supervision and guidance. Children should only access the fan under supervision to prevent it from being used as a toy;
A separate socket with a rated current matching the current of the fan shall be used, and using a universal socket or sharing the socket with other electrical appliances is not allowed;
If the fan does not work, the power must be cut off before repair and repair must be done by professional personnel;
Do not move the fan with the power supply connected;
Hold the plug when disconnecting the power plug, and do not pull the power cord;
In case of damage to the power cord, to prevent hazards, the damaged cord must be replaced by professional personnel from the manufacturer or their maintenance department;
Do not stretch or tighten the power cord, and keep the power cord away from overheated surfaces;
Do not run a fan with a carpet covering over, and do not cover the fan with a rag, other devices, or similar materials. The power cord shall be arranged away from frequent access and placed in an area seldom accessed area to prevent tripping hazards;
Turn off all operating devices before unplugging;
When the fun will not be used for a long time, disconnect the plug from the socket;
Keep the power cord properly to prevent tripping hazards;
Do not put any objects at the air inlet or outlet, and make sure the air inlet and outlet are free from blocking and free of dust, lint, hair, and any other obstacles that may hinder the airflow;
The fan should be placed on a level surface in a well-ventilated and dry environment away from the heat source and free of corrosive gas, a clearance of 150mm shall be reserved around to ensure airflow;
The fan shall be placed and used in dry places, and cannot be used outdoors or on wet surfaces;
Immersing the fan, power cord, and power plug in water or other liquids is strictly prohibited, otherwise, it may result in hazards. Do not use other extension power cords except for the case of inspection by a professional person;
Do not place an air freshener or similar products next to the fan, do not use any detergent or lubricant to clean or maintain the fan, and the power plug must be disconnected before any cleaning or maintenance.

Specifications

Model UML-018
Product Size 151555cm
Rated Power 20-35W
Input AC 120V, 60Hz
Remote Control Battery CR2025, 3V

Package Contents

1 x Bladeless Fan
1 x Remote Control
1 x User Manual

Product Diagram

Display and Touch Key

Note:
The display is not only the screen but also the operating buttons.

Power ON/OFF

Tap the touch key to open the fan, the fan is at speed level 5 by default upon initial starting after restoration of power if the power has been disconnected.
Tap the touch key to start the fan, and the airflow speed corresponds to the speed level before the fan enters the ready mode.
Tap the touch key on the main unit to adjust the speed level cyclically from levels 1-8, H, L.
Press and hold the touch key for 4 seconds to turn it off. Oscillation Function
In the operating mode, press and hold the touch key for 2 seconds to enter the oscillation function, plus the fan starts to oscillate 90°left and right;
Again press and hold the touch key for 2 seconds to cancel the oscillation.

Remote Control

Note:
All the functions can be achieved through the buttons on the remote control.

Operations and Functions

Place the fan on a firm, level surface free from obstructions, plug into an appropriate voltage AC 120V outlet, and the unit will enter standby mode with a beep. Your fan is ready for use now.

Power ON/OFF
In the standby state, press the button, and the fan will be turned on and start running, press this button again, and the fan will slow down and stop and then enter the standby state.
Oscillation button
When the fan is in operating mode, press this button once to turn on the oscillation, and press it again to turn off the oscillation.
Timing button
- Press this button to enter the Timing mode, in which the fan can be set to run for a fixed time of 0-9 hours. When 0 is set, it means the timing function is turned off.
- The flashing dot on the LED display indicates the timed state.
Mute button
Press the button once to turn off the machine’s beeps; press the button again to turn on the machine’s beeps.
+- buttons
- In the running state, press the “-” button and the wind speed will be turned down by 1 level; when pressing this button while the current wind speed is in speed 1, the buzzer will generate a “beep beep”, reminding the user that the wind speed is currently at its lowest level.
- In the running state, press the “+” button and the wind speed will be turned up by 1 level; when pressing this button while the current wind speed is in Speed 8, the buzzer will generate
  “beep beep”, reminding the user that the wind speed is currently at its highest level.
Mode button
- Press this button to switch between modes “L” and “H”;
- In “L” mode, the fan runs at low speed and the LED display shows “L”.
- In “H” mode, the fan runs at high speed and the LED display shows “H”.

Other Features

Memory Function
- The fan is designed with a memory function. It will always remember your last settings (modes, speeds) once you turn it on again.
- This function is only available when the power plug is not unplugged. If the power plug is reconnected, the default setting is 5 speed.
Auto LED Display Off
- If no operation is done within 30 s after being powered on, the display will turn off automatically.
- To turn the display back on, press any button to wake it up.

Replacement of Batteries

Use a screwdriver to unscrew the small screws on the remote control cover.
Slide and remove the battery cover from the remote control.
Prepare a button battery with the lettered side facing up, and install the button battery into the remote control.

Caution
Chemical Burn and Choking Hazard. Keep batteries away from children.

This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Dispose of cells properly and keep them away from children. Even used cells may cause injury.

CLEANING AND MAINTENANCE

We recommend cleaning the fan at least once during the operating season and before the off-season. This will ensure optimal performance.

Always disconnect the appliance from the mains by switching it off and removing the plug from the power outlet before cleaning.

Use only a soft cloth to gently wipe the outer surfaces of the fan clean.
Do not use any cleaning agents or detergents.
Never immerse the fan in water and never allow water to drip into the motor housing.
For storage, you may leave the fan covered to protect it from dust. Store it in a cool, dry location and arrange the cable away from traffic areas so that it will not be tripped over or damaged.

Caution:

Do not allow water to run into the interior of the fan as this could result in a fire or electric shock hazard.
Any other servicing should be performed by an authorized service representative.
Except for cleaning, any other servicing should be performed by an authorized service representative.
Carefully fold the power supply cord and tie it up with a cord, then put the fan into the packing box. Keep it in a cabinet away from any hot or wet location.

TROUBLESHOOTING

The following troubleshooting guide addresses the most common problems. If problems persist, contact Customer Support at support@senmeo.com.

WARRANTY AND SERVICE

Default 12-Month Warranty
This product is covered with Senmeo product and labor warranty for 12 months from the date of its original purchase.
Extend Your Warranty
Contact us by email (support@senmeo.com) with the correct order number and the warranty will be extended for a further 12 months.

The warranty will not apply in cases of:

Accidents, misuse, or repairs performed by unauthorized personnel.
Any unit that has been tampered with or used for commercial purposes.
Normal wear and tear of wearable parts.
Use of force, damage caused by external influences.
Damage caused by non-observance of the User Guide, e.g. connection to an unsuitable mains supply or non-com-pliance with the instructions.
Partially or completely dismantled appliances.
Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by Senmeo.

We can only provide after-sales service for products that are sold by Senmeo or Senmeo-authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.

We’re Here to Help!