Senmeo PX-P001 PTC Fan Heater User Manual

PTC Fan Heater
User Manual
MODEL: PX-PO0O1
uk-support@senmeo.com

Thanks for Choosing
Semmes!
Your support means the world to us. We hope you enjoy our product as much as we did creating it.
EXTEND YOUR WARRANTY FOR FREE
In the unlikely event of a product failure, we offer a 12-month warranty for peace of mind.
In addition, we will extend the warranty period for another 12 months if you provide us with your order number via e-mail (uk-support@sen-meo.com).
uk-support@senmeo.com
www.senmeo.com

IMPORTANT SAFETY INSTRUCTIONS

| To reduce the risk of electric shock or personal injury, the following basic precautions should be strictly observed when using electrical products.
---|---
| WARNING: Do not cover the heater. There is a risk of overheating.
Do not use the fan heater near combustible materials!
| Do not use the fan heater near combustible materials!

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• Read all instructions before using this heater.
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
• Always unplug heater when not in use.
• Extreme caution is necessary when any heater is used by or near children or  invalids and whenever the heater is left operating and unattended.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
• Do not use outdoors.
• This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
•  Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
• To disconnect heater, turn controls to off, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked. Heaters has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• If there is a loose fit between the plug and the socket or the plug becomes very hot, the socket may need to be replaced. Check with a qualified electrician to replace the socket.
• It is normal for the plug and cord to feel warm to the touch. A plug or cord which becomes hot to the touch or becomes distorted in shape may be a result of a worn electrical outlet. Worn outlets or receptacles should be replaced prior to further use of the heater. Plugging the heater into a worn outlet / receptacle may result in overheating of the power cord or fire.
• The output of this heater may vary and its temperature may become hot enough to burn exposed skin. Use of this heater is not recommended for persons with a high sensitivity to heat or an inability to react to avoid burns.
• Ensure the heater is on a stable, secure surface to eliminate the potential of tipping it over.
• Make sure that no pieces of polystyrene or other packaging material have been  left between elements of the appliance. It may be necessary to pass over the appliance with a vacuum cleaner.
• Do not attempt to modify or repair the product by yourself. Doing so could void the warranty and cause damage or personal injury. Only a repair technician may disassemble or repair this product.
• If the machine is not working as it should, has received a sharp blow, has been dropped, damaged, left outdoors, or dropped into water, do not use and contact Customer Support.
• NOTE: There may be a trace of smoke or odor when the unit is first operated. This indicates that a drop of oil fell on the heating coil during the manufacturing process. It will quickly evaporate and should not re-occur.

FOR HOUSEHOLD USE ONLY READ AND SAVE THESE INSTRUCTIONS

Check the appliance regularly and refer to TROUBLE SHOOTING or contact our customer support if it shows any of the following signs:

• Power cord or plug is damaged.
• Unusual smell or excessive heat.

Specifications

HOT SURFACE
THE FRONT SURFACE CAN BE VERY HOT DURING USE.
DO NOT TOUCH WHEN IN USE.

USE YOUR HEATER

Package Contents
1 x PTC Fan Heater
1 x User Manual
1 x Description of Power Plugs
Product Diagram

Operations and Functions
Power ON/OFF

• Press the power switch on the back of the heater to “I” or “II” the heater starts to work.
• “I” is for warm air wattage 650w, “II” is for hot air wattage 1000w.
• Press the power switch to “0” and the heater stops heating.

Other Features
Adjustable Up and Down 30°

• The heater can be manually adjusted with the front body up or down 30°.

Carrying Handle

• The heater comes with a strap that can be used to move the heater around to avoid burns.

Tip-Over Protection

• When the product is heating and the body tips over, the bottom tipping protection device pops up and will automatically turn off the heater.

Overheating Protection

• When the heater is running and the temperature exceeds the stall temperature, the bimetal in the body will be heated to produce internal stress and quickly cut off the circuit to stop heating, thus playing a role in temperature control. When the heater cools down to the set stall temperature, the heater resumes normal operation.

CLEANING AND MAINTENANCE

It is recommended that the heater be cleaned at least one time during the operating season and before off-season storage in order to provide the optimum level of performance.

• Turn off the heater, unplug it and wait for the heater to cool down.
• Use only a soft cloth to gently wipe the outer surfaces of the heater clean.
• Do not use any cleaning agents or detergents.
• Never immerse the heater in water and never allow water to drip into the motor housing. Be sure not to wet the heating element and the switches.
• For storage, you may leave the heater covered to protect it from dust. Store it in a cool, dry location and arrange the cable away from traffic areas so that it will not be tripped over or damaged.
• Always disconnect the appliance from the mains by switching it off and removing the plug from the power outlet before cleaning.

Caution：

• Do not allow water to run into the interior of the heater as this could result in a fire or electric shock hazard.
• Any other servicing should be performed by an authorized service representative.
• Except cleaning, any other servicing should be performed by an authorized service representative.
• Carefully fold the power supply cord and tie it up with a cord, then put the heater into the packing box. Keep it in a cabinet away from any hot or wet location.

TROUBLE SHOOTING

The following trouble shooting guide addresses the most common problems. If problems persist, contact the Customer Support at uk- support@senmeo.com.

to a powered electrical outlet
No power is passing through the unit| Ensure that your circuit breaker or fuse is working properly
Ensure your heater is placed on a flat and even surface
The heater is tipped over| The heater is tipped over| Place it on a flat, level and stable surface

Senmeo-CUSTOMER SERVICE

Default 12-month warranty
Thanks for choosing Senmeo heater. This product is covered with Senmeo product and labor warranty for 12 months from the date of its original purchase.
Extend your warranty
Contact us by email (uk-support@senmeo.com) with the correct order number and the warranty will be extended for a further 12 months.
The warranty will not apply in cases of:

• Accident, misuse, or repairs performed by unauthorized personnel.
• Any unit that has been tampered with or used for commercial purposes.
• Normal wear and tear of wearable parts.
• Use of force, damage caused by external influences.
• Damage caused by non-observance of the User Guide, e.g. connection to an unsuitable mains supply or non-compliance with the instructions.
• Partially or completely dismantled appliances.
• Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by Semmes.

We can only provide after-sales service for products that are sold by Sense or Sense authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.
uk-support@senmeo.com
ZHONGSHAN CHUNKAI ELECTRONICS CO., LTD

• Please have your order confirmation number ready before contacting Customer Support.

www.senmeo.com
Senmeo PX-P001
We’re Here to Help!
Contact our customer support!
uk-support@senmeo.com
www.senmeo.com

References

• Home | The Lord of the Rings Online

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>