8BitDo Ultimate 2C Wired Controller User Guide
- August 24, 2024
- 8Bitdo
Table of Contents
8BitDo Ultimate 2C Wired Controller User Guide
Ultimate Wired Controller
Windows
Required system: Windows10(1903) or above
1 – connect the controller to your Windows device via its USB cable
2 – wait till the controller is successfully recognized by your Windows to
play, status LED becomes solid
Android
- Required system: Android 9.0 or above
- OTG support is required on your Android device. Please contact yourdevice manufacturer for more details
- Hold B button, connect the controller to your Android device via its USB cable
- Wait till the controller is successfully recognized by your Android to play, status LED becomes solid
Switch
- OTG cable is required for Switch Lite
- Switch system needs to be 3.0.0 or above
- Go to System Setting> Controller and Sensors> Turn on [Pro Controller Wired Communication]
-
- NFC scanning, motion control, IR camera, HD rumble, notification LED are not supported, nor can the system be waken up
- Connect the controller to your Switch dock via its USB cable
- Wait till the controller is successfully recognized by your Switch to play, status LED becomes solid
Turbo Function
- D-pad, Left stick, Right stick are not supported
- Status LED blinks continuously when the button with turbo functionality is pressed
-
- Hold the button you would like to set turbo functionality to and then press the star button to activate/deactivate its turbo functionality
Ultimate Software
- It gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger sensitivity, vibration control and create macros with any button combinations
- Please visit app.Bbitdo.com for the application
Support
Please visit support.8bitdo.com for further information & additional support
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>