YHDC SCT006 Split Core Current Transformer Owner’s Manual
- August 23, 2024
- YHDC
Table of Contents
YHDC SCT006 Split Core Current Transformer
OWNER’S MANUAL
MODEL: SCT006
Product picture printing is for reference only, subject to the actual product
Characteristics:
Safety lock buckle, easy installation,cable output.
Technical index：
- Mounting type: Free hanging (In-Line)
- Material of core: Ferrite
- Applicable standards: GB20840-2014
- Operating temperature: -25℃ ~ +60℃
- Storage temperature: -30℃ ~ +90℃
- Frequency range: 50Hz-1KHz
- Waterproof grade: IP00
- Dielectric strength: Input (bare conductor)/Output AC 800V/1min 50Hz; Output/housing AC 3.5KV/1min 50Hz
Electrical parameters:
The following parameters are typical values. The actual values shall be subject to the actual measurement of the product
Dimension（in mm±0.5）:
Product Usage Instructions
- Ensure the safety lock buckle is properly engaged before installation.
- Connect the cable output to the corresponding device securely.
- Refer to the specific electrical parameters for input and output requirements.
- Do not open the secondary circuit during operation.
- Handle the product with care to maintain accuracy and prevent damage.
Frequently Asked Questions (FAQ)
Q: Can the cable length be customized?
A: The cable length should be within the specified range of 30cm~32cm for optimal performance and safety.
Q: What does the TVS feature do?
A: The Transient Voltage Suppressor (TVS) helps protect against voltage spikes and surges in the current output.
Q: How do I ensure proper installation?
A: Make sure to engage the safety lock buckle securely and connect the cable output following the provided instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>