YHDC SCT024TSL Split Core Current Transformer Instruction Manual
- June 3, 2024
- YHDC
Table of Contents
YHDC SCT024TSL Split Core Current Transformer Instruction Manual
Product features
- Secure locking buckle, easy to install
- Leading wire output (Three lead specifications)
- Can customize a variety of output
- Suspended mounting
Product application
- Portable instrument
- House hold metering
- Monitoring the load of machine
Product advantage
- Small volume, Light weight
- Low cost
- High turns, High precision
Installation diagram
-
Open the buckle
-
Open upward
-
Put in lead wire
-
Fasten the buckle
Typical technical index:
- Material of core——Silicon steel sheet
- Working voltage——Phase voltage ≤ 720 V
- Working temperature——-25℃～+60℃
- Storage temperature——-30℃～+90℃
- Frequency range——50Hz～60Hz
- Dielectric strength—— input (Bare conductor)/output AC 800V/1min 5mA 50Hz output/outshell AC 3.5KV/1min 5mA 50Hz）
- Weight————220g
Electrical parameters
(The following parameters are typical values. The actual values shall be subject to the
| 1A output type | Dimensions: 1 |
|---|---|
| Model | Input current AC |
Leading wire specification: 0.5mm 2
Black and white twisted pairlead length： 00cm~105cm
Lead wire Color: white, black
| Diagram
SCT024TSL| 50A| 1A| 50 : 1| 1%| 
current output type.
the secondary is not allowed to open.
SCT024TSL| 100A| 1A| 100 : 1| 0.5%/1%
SCT024TSL| 150A| 1A| 150 : 1| 0.5%/1%
SCT024TSL| 200A| 1A| 200 : 1| 0.5%/1%
SCT024TSL| 250A| 1A| 250 : 1| 0.5%/1%
SCT024TSL| 300A| 1A| 300 : 1| 0.5%/1%
SCT024TSL| 350A| 1A| 350 : 1| 0.5%/1%
SCT024TSL| 400A| 1A| 400 : 1| 0.5%/1%
5A output type| Dimensions: 1
---|---
Model| Input current AC| output AC| Turns ratio| Accuracy| Lead specification|
Diagram
SCT024TSL| 100A| 5A| 100:5| 5%| Leading wire specification: 2.5mm² soft wire
lead length：100cm~105cm
Lead wire Color: white, blue
| 
current output type.
the secondary is not allowed to open.
SCT024TSL| 150A| 5A| 150:5| 1%
SCT024TSL| 200A| 5A| 200:5| 0.5%/1%
SCT024TSL| 250A| 5A| 250:5| 0.5%/1%
SCT024TSL| 300A| 5A| 300:5| 0.5%/1%
mA output type| Dimensions: 2
---|---
Model| Input current| output current| Turns ratio| Accuracy| sampling
resistance| Lead specification/schematic diagram
SCT024 TSL| 50A| 50mA| 1:1000| 0.5%/1%| 20Ω| Leading wire specification: 2×0.
2 mm 2
Two core shielded wire
lead length：100cm~105cm
TVS: Transient voltage suppressor(7.5V)
current output type.
the secondary is not allowed to open.
SCT024 TSL| 100A| 50mA| 1:2000| 0.5%/1%| 20Ω
SCT024 TSL| 200A| 20mA| 1:10000| 0.5%/1%| 50Ω
SCT024 TSL| 200A| 50mA| 1:4000| 0.5%/1%| 20Ω
SCT024 TSL| 300A| 50mA| 1:6000| 0.5%/1%| 20Ω
SCT024 TSL| 400A| 50mA| 1:8000| 0.5%/1%| 20Ω
SCT024 TSL| 400A| 80mA| 1:5000| 0.5%/1%| 20Ω
SCT024 TSL| 400A| 100mA| 1:4000| 0.5%1%| 8Ω
0.333V/1V/3V/5VAC voltage output type| Dimensions: 2
---|---
Model| Input current| Output AC voltage| Accuracy| Load impedance| Lead
specification/schematic diagram
SCT024 TSL| 50 A| 0.333V
or
1V
or
3V
or
5V| 0.5%/1%| ≥10KΩ| Leading wire specification:
2×0. 2 mm 2
Two core shielded wire
lead length：100cm~105cm
sampling resistance built-in
voltage output type not allowed secondary short circuit
SCT024 TSL| 100 A
SCT024 TSL| 200 A
SCT024 TSL| 300 A
SCT024 TSL| 400 A
Dimensions 1: (in:mm±0.5)
Dimensions 2: (in:mm±0.5)
Standard Ф3.5mm three-pin plug diagram
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>