Mingqinxin KH5S Bluetooth Selfie Stick User Guide

Mingqinxin KH5S Bluetooth Selfie Stick

Product Specifications:

• Connection : Micro-USB
• Compatibility : Android 4.3 and above, iOS 5.0 and above
• Features : Selfie stick with phone clip, fixing knob, telescopic shaft, remote control, indicator light, shutter button, built-in tripod, fill light (optional)
• Special Features : Rotatable phone clip, extendable telescopic shaft, detachable Bluetooth remote control, foldable tripod grip, multiple lighting modes for fill light
• Power Source : Rechargeable via Micro-USB cable

Product Usage Instructions

Setting Up the Selfie Stick:

1. Attach your phone to the phone clip securely.
2. Extend the telescopic shaft to your desired length.
3. Adjust the angle of the phone clip by rotating it 360 degrees as needed.
4. If using the fill light, turn it on/off and change lighting modes using the power button.

Using the Remote Control:

1. To detach the remote control, follow the provided instructions.
2. Replace the battery in the remote control when needed (based on the type).
3. Pair the remote control with your device for capturing photos.

Maintenance and Troubleshooting:
Follow these tips to maintain your selfie stick:

• Avoid storing in extreme temperatures or damp environments.
• Properly replace the battery in the remote control.
• Keep away from infants to prevent accidental swallowing of small parts.

FEATURES

1. Phone Clip
2. Telescopic Shaft
3. Indicator Light
4. Built-in Tripod
5. Fixing Knob
6. Remote Control
7. Shutter Button
8. Fill Light (options)

Selfie Stick Introductions

Fill Light (options)

Detachable Remote

Quick Steps for Remote

1. Step 1: On your phone, tap Settings > Bluetooth, and then turn on the Bluetooth.
2. Step 2: Hold down the shutter button (about 2s) until indicator light starts flashing to turn on the remote control.
3. Step 3: Once the Bluetooth name of “Selfie” appears in the display, select it and tap “pair”.
4. Step 4: Press the Shutter button to take photos.
5. Step 5: Hold down the shutter button (about 3s) until indicator light goes out to turn off the remote control.

Reminder : The remote control is compatible with Android 4.3, IOS 5.0 and later.

Replace the Battery

Reminder : The Bluetooth remote control has two types. Please follow the corresponding steps to replace the battery according to the type of your purchased product.

1. Covering Type
   Force apart the upper shell at the groove on the side of the remote with a fingernail, then replace the battery, and finally fasten the shell back.

2. Sliding Type
   Slide the back cover in the direction of the arrow as shown, then replace a new battery, and finally insert the cover back.

Troubleshooting

1. If your phone is unable to connect to the remote.
   Delete the Bluetooth pairing on your phone, reboot the remote and start a new device search.

2. If your Android phone can’t take photos when you press the shutter button,.
   Open the camera App and change the “Volume button function” to “Default” or “Shutter”.

Attention:

1. Don’t store the product in icy or damp environment.
2. Don’t place the product in the heat.
3. When replacing the battery, place the positive pole “+” of the battery outwards.
4. This product contains a battery, please place it out of the touch of infants to prevent children from swallowing it by mistake.
5. Don’t use the product in restricted district to avoid violating public order.

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of theFCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.

Thanks for your support!

Frequently Asked Questions

Q: Can I use this selfie stick with any smartphone?
A: The selfie stick is compatible with smartphones running Android 4.3 or later and iOS 5.0 or later. Ensure your device fits within the phone clip dimensions for proper usage.

Q: How do I charge the fill light?
A: The fill light can be charged using a Micro-USB cable. Make sure to refer to the model-specific instructions for charging.

Q: What should I do if the remote control does not work?
A: If you encounter issues with the remote control, try replacing the battery following the provided instructions. Ensure proper pairing with your device for functionality.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>