ANJOU AJ-ADA007 Luna Diffuser User Guide

ANJOU AJ-ADA007 Luna Diffuser

Instructions

For your safety, please read and follow all instructions

• This product is a household electrical appliance.
• This product is not intended for use as interior room lighting.
• This product can be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

IMPORTANT SAFEGUARDS

1. Keep the essential oils out of reach of children. Do not install or use within the reach of children or pets. Children shall not play with the appliance. Cleaning and user maintenance shall not be undertaken by children without supervision.
2. Do not use this product for any other purpose than to emit and diffuse aroma.
3. Use the included power adapter only. Unplug the power adapter if the aroma diffuser is to be idle for a long time.
4. Never attempt to insert pins, wires, or other foreign objects into the mist diffuser outlet or seams / gaps of the product.
5. Please fully extend the power cord and check its intactness. Do not use this product if the AC adapter power cord or plug become damaged, or if the plug does not sit firmly in the electrical outlet socket.
6. Do not damage the AC adapter power cord, bend the cord forcefully, pull, or twist the cord. Do not allow the cord to come close to hot components, and do not set heavy items on top of the AC adapter cord. Do not pinch the cord between other objects or attempt to modify the cord in any way.
7. Do not attempt to insert/remove the AC adapter with wet hands.
8. Do not submerge or pour/splash water on this product or its AC adapter. Do not use or store in locations subject to high humidity.
9. Do not block the mist diffuser outlet when the unit is on.
10. Do not remove or tilt the product when it is in operation. Water or essential oil may spill causing damage to the surrounding area or resulting in product malfunction.
11. Do not touch the atomizer unit immediately after turning it off.
12. Always hold the diffuser unit by its lower section when lifting it to move.
13. Do not use this product in the following locations. Doing so may result in product breakage, malfunction, or damage to surrounding areas：
    • Do not place in a location that allows mist emitted from the product to come into direct contact with furniture, clothing, curtains, walls, documents or other paper goods, ceiling, etc.
    • Do not place in a location under direct sunlight, locations subject to extreme heat such as heaters or sources of flame, or locations subject to direct wind such as near air conditioners.
    • Do not place near electronic appliances, precision equipment, etc.
    • Do not place on soft cushions, shag/pile carpets, etc.
    • Do not place on unstable / non-flat surfaces.
14. After use, dispose of any water left in the water tank. Periodically clean the product and always keep it in a clean condition by following the methods described in this User’s Manual, in case of odors and mold.
15. Do not attempt to modify this product. Do not allow anyone other than a qualified service Anjou Diffuser technician to disassemble or repair this product.

PACKAGE CONTENTS

• 1 x Anjou Diffuser (Model: AJ-ADA007)
• 1 x Cleaning Brush
• 2 x Lavender Essential Oils
• 1 x Power Adapter
• 1 x User Guide
• 1 x Tweezer
• 10 x Luna Stoppers
• 1 x Operation Card

SPECIFICATIONS

Working Time

| High Mist: > 24 hours Low Mist: > 40 hours

Mist Output

| High Mist: 60 ± 15 ml/h / 2.0 ± 0.5 fl.oz/h

Low Mist: 30 ± 10 ml/h / 1.0 ± 0.3 fl.oz/h

Water Tank Capacity| 1.8L / 0.5 Gallons
Atomization Frequency| 2.4 MHz
Wi-Fi| 2.4GHz
Noise| < 30 dB

PRODUCT DIAGRAM

1. Nozzle
2. Aroma Button
3. Timer Button
4. Light Button
5. Light
6. Mist / Power Button
7. Base
8. LED Indicators
9. Water Tank
10. Tank Lid
11. Max Water Level
12. Line Mist Tube
13. Water Outlet
14. Muting Cover
15. Essential Oil Bottle
16. Holder Air Outlet
17. Rubber Parts
18. Power Port
19. Atomizer

BEFORE USING THE DIFFUSER

1. Unpack the product and check the completeness of the accessories.
2. Check whether [12] the mist tube, the valve on [13] the water outlet, the [14] muting cover, and the [15] essential oil bottle holder are well installed.
3. Unpack the essential oil bottles and check if any leakage occurs.

GET STARTED

1. Connect the unit to a power source via the included power adapter. All the LED indicators will flash for one second.
2. Screw the essential oil bottle onto the essential oil bottle holder.
3. Remove the water tank and uncover its lid, add water into the tank no higher than the max water level line. Do not add water into the mist tube.
4. Place the tank back onto the base. The diffuser is ready for use now.

ESSENTIAL OIL BOTTLE STOPPER REPLACEMENT

1. Unscrew the cap, clamp the stopper neck with the tweezer and take out the COMMONLY USED STOPPER.
2. Fix the LUNA STOPPER on the bottleneck, align the stopper top with the tweezer and press to plug in the Luna stopper.
3. Screw the essential oil bottle onto the holder.

Note:

• When using other essential oils of relatively stronger corrosivity (e.g., Eucalyptus, Clove, etc.) or higher density (e.g., Cinnamon, Sandalwood, etc.), please replace with caution as such essential oils may affect the output of essential oil.
• The Luna stopper is intended for single use only. Repeated use may cause oil leakage.

HOW TO USE

Mist Adjustment

1. With power connected, press the Mist / Power Button once to turn on High mist and Light aroma by default (High & Light indicators on).
2. Press it one more time to enter low mist mode with the low indicator lighting up.
3. Press again to resume high mist. Keep pressing to cycle through the two mist modes.
4. Press and hold the Mist / Power Button for 2 seconds to turn off the unit (Mist & Aroma off).

Set the Timer

1. When the mist is on, press the Timer Button once to set 2 hour timer.
2. Press it a second time to set 4 hour timer.
3. Press it a third time to set 8 hour timer.
4. Keep pressing it to cycle through 2 / 4 / 8 hour timer settings.
5. The corresponding timer indicator will light up once it is set.
6. Press and hold the Timer Button for 2 seconds to turn off the timer.

Aroma Adjustment

1. When the mist is on, press the Aroma Button once to enter Strong aroma mode.
2. Press one more time to shift to Light aroma mode.
3. Keep pressing to cycle through Strong and Light modes.
4. When changing the aroma mode, there is a 10-second delay for aroma output.
5. Press and hold the Aroma Button for 2 seconds to exit the aroma setting.

Set the Light

1. When the mist is on, press the Light Button once to enter automatic light carousel mode where 7 colors will cycle through.
2. Press again to stay on current color.
3. Keep pressing to cycle through different colors. When the cycle is done, press it one more time to turn off the light.
4. Or press and hold the Light Button for 2 seconds to turn off the light at any time.

APP INSTALLATION AND WI-FI PAIRING

1. Search“Anjou Diffuser”in the “App Store”for iOS devices or “Google Play” for Android devices, tap on the name to download.
2. Once installed, click “Go to sign up” to create your account via phone number or email address. You can also log in with a third-party (e.g. Facebook) account.
3. Login your account and add your device (support 2.4G Wi-Fi network only):
   • Click “Add Device” to choose the device type.
   • Press and hold the Aroma and Mist / Power Buttons simultaneously for 3 seconds to enter Wi-Fi pairing mode with the light flashing white twice every second.
   • Select 2.4GHz Wi-Fi and enter the password to start pairing. You can also click to see how to distinguish between 2.4GHz and 5GHz Wi-Fi network.
   • Pairing will finish within 120 seconds. Once successfully connected, the light will stay solid green for 5 seconds and turn off. You will be directed to Device Management interface. For first time installation after adding the device, there will be an onscreen guideline for quick start of the APP.
   • If failed, the light will stay solid red for 5 seconds and turn off. You will be prompted with Wi-Fi connection timed out. Check and try to connect again.

Note:

• To cancel Wi-Fi pairing, press and hold the Light Button for 3 seconds until the light turns off.
• Once successfully connected for the first time, the unit will connect to the paired network automatically when powered on. The light will stay solid red for 5 seconds and turn off.

USING THE APP

1. Click the device name to start controlling the diffuser via the app.
   Note: The Timer and Aroma Buttons on the app are non-operational if the Mist function is deactivated. While the Light Button is independently operational.

2. Click … on the top right corner to enter Device Management interface. Click Device Name to edit the device name, click Save to save your editing.

3. Click Device Location to add your device location, click Save to save it.

4. Click … on the top right corner to enter Device Management interface. Select “Delete the Device”, a window pops up with a confirmation of deletion. Click Delete to “delete” the device.

5. Click on the top right corner of the My Devices interface. Select “Location Management”, then click “Edit” on the top right corner to select the location to be deleted. A window pops up with a confirmation of deletion, click “Delete” to delete the location.

6. Firmware Upgrade

   • Click … on the top right corner to enter Device Management interface. Select “Update” to check if the current version is latest one. If yes, then there is no need to upgrade the firmware.
   • If a new version is available, click “Update Now” to upgrade the firmware to the latest version. For upgrade failure caused by network failures, please wait until the network returns normal and click “Retry” to try again.

VOICE CONTROL

For more detailed voice control instructions, please visit our website www .anjou-diffuser.com.

Control via Amazon Echo

1. Download “Amazon Alexa” app from the App Store (iOS devices) or Google Play (Android devices).
2. Once installed, open the “Amazon Alexa” app and follow the onscreen instructions to complete Echo setup.
3. Pair the diffuser via “Anjou Diffuser” as instructed in the “App Installation and Wi-Fi Pairing” section. Make sure it is successfully paired and function normally.
4. Link “Anjou Diffuser” account to Alexa:
5. In Alexa, tap “Skills” and search for “Anjou Smart”, then tap “ENABLE” to activate it.
6. Enter the user name and password of your “Anjou Diffuser” account and choose the region.
7. Tap “Link now” to finish linking. Then tap on the top right corner to return to Alexa app.
8. Control your diffuser via Echo
9. Discover your device: Say “Alexa, discover devices” to Echo. It will scan devices added to Anjou Diffuser app. Or you can tap “DISCOVER” in Smart Home page to manually find the devices.
10. Once discovered, you can use Echo to control your diffuser.

  * Turn on/off the mist  

Voice command: “Alexa, turn on / turn off + Your device name”.

  * Turn on/off the light  

Voice command “Alexa, turn on / turn off + Light name”.

Control via Google Home

1. Download “Google Home” app from the App Store (iOS devices) or Google Play (Android devices).

2. Once installed, open the “Google Home” app and follow the onscreen instructions to complete Google Home setup.

3. Pair the diffuser via “Anjou Diffuser” as instructed in the “App Installation and Wi-Fi Pairing” section. Make sure it is successfully paired and function normally.

4. Link “Anjou Diffuser” account to Google Home:

5. On the Home page, tap at the bottom right corner, select “Home Control”, and then tap at the  bottom right corner.

6. Tap “Anjou Smart”, enter the user name and password of your “Anjou Diffuser” account and choose the region.

7. Tap “Link now” to finish linking. Then assign the room where the device is. Your device will be listed in Devices of Home Control.

8. Now you can use Google Home to control your diffuser.

   • Turn on/off the mist
     Voice command: “OK Google, turn on / turn off + Your device name”.

   • Turn on/off the light
     Voice command “OK Google, turn on / turn off + Light name”.

Notes:

1. If the device name has been changed, you need to re-discover the device for voice control.
2. Light and aroma names are preset and cannot be edited.

CLEANING AND MAINTENANCE

Regular Cleaning

1. Empty the tank.
2. Add 3-5g (approx. one teaspoon, based on scale of the residues) baking soda / NaHCO3 to the tank.
3. Fill the tank halfway full with warm water (100-150ml / 3.38-5.07tloz), stir it to fully dissolve.
4. Soak for 3-5mins, wipe down the tank and tank cover using a small brush or soft cloth with baking soda solution. (For better cleaning, remove the muting cover and wipe it down thoroughly).
5. Drain the solution and rinse the tank under tap water.
6. Rub the inside and outside dry with a dry towel or clean cloth.
7. Wipe off the soda residues if any.

Scale Removal

1. You are recommended to deep clean your dittuser once a month or when the mist output is low due top grime build-up.
2. Empty the tank from the water outlet.
3. Add 2-3 teaspoons of baking soda / NaHCO3, or 2-3 slices of fresh lemon to the tank.
4. Fill the tank halfway full with warm water (100-150ml / 3.38-5.07floz), stir it to fully dissolve. 4) Soak fo about half an hour.
5. Thoroughly clean the grime at the bottom of the tank and atomizer with a small brush.
6. Wipe down tank cover using a small brush or soft cloth with baking soda solution. (For better cleaning remove the muting cover and wipe it down thoroughly).
7. Drain the solution and rinse the tank under tap water,
8. Wipe off the soda residues if any.
9. Rub the inside and outside dry with a dry towel or clean cloth.

Notes:

1. You may use dishwashing detergent when baking soda is unavailable. But it works better for oil removing instead of odor and mineral buildup.
2. Do not rinse the base directly with water; try to avoid wetting the buttons, light holes, air inlets and underneath to avoid short circuit.
3.  It is not recommended to clean the unit with white vinegar since its direct and indirect contact with the atomizer will damage it permanently.

TROUBLESHOOTING

Check the following if the product appears to be broken or operating abnormally.

1

|

The mist output is becoming low

|

Please clean the atomizer regularly

2

|

The unit stops misting with the

light flashing red as over-temperature alarm.

|

·    Turn off the unit.

·    Pay attention to the environmental temperature and place the unit in

a well-ventilated place to cool down.

·    Do not add warm water into the tank.

3

|

Pairing failed with the light staying solid red for 5 seconds.

|

Poor network signal, place the unit closer to the router.

4

| After several abrupt power failure, the rubber parts malfunctioned leading to water overfilling| Remove the water tank and wait the rubber parts drop back into place.
5| Mist level is becoming low, and finally stops misting|

Add water into the water tank.

---|---|---

6

| Grime appears in the water tank and water reservoir| Clean the unit as instructed in the Cleaning and Maintenance section.
7| Strange odor after long idle time| Please clean the unit thoroughly.
8| Previously used essential smell remains in the unit|

Please clean the diffuser thoroughly.

9

|

Fragrance not strong enough

| Please set the concentration to strong mode and adjust the mist level to high.

10

|

Water outlet leakage

| Clean the water outlet and squeeze its spring for several times and let it bounce into place.
11|

Dampen desk

| The mist level is too high for the space. Please lower the mist level.

12

|

Mist height is too low.

| Please make sure the essential oil bottle is properly installed.

Please make sure the water tank and the base are well aligned with each other.

WEEE Compliance

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accesso-ries should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

References

• HOME

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>