CORNING 024KUZ-T4130D20 LSZH Loose Tube Owner’s Manual
- August 23, 2024
- Corning
Table of Contents
CORNING 024KUZ-T4130D20 LSZH Loose Tube
Product Information
Specifications
- Part Number: 024KUZ-T4130D20
General Specifications
- Environment: Outdoor aerial and duct; indoor general-purpose horizontal
- Cable Type: Dielectric
- Product Type: Fiber
- Fiber Category: 24
- Flame Rating: Flame-retardant, non-corrosive/low-smoke, zero-halogen (FRNC/LSZH)
- Application: Telcordia
- Fiber Count: 2
Mechanical Specifications
- Max. Tensile Strength, Long-Term: 810 N (182.1 lbf)
- Max. Tensile Strength, Short-Term: 2700 N (606.98 lbf)
- Min. Bend Radius Installation: 192 mm (7.56 in)
- Min. Bend Radius Operation: 128 mm (5.04 in)
- Nominal Outer Diameter: 12.8 mm (0.5 in)
Optical Characteristics
- Minimum Effective Modal Bandwidth (EMB): 220 MHz*km / 3.4 dB/km / 1.0 dB/km
- Maximum Attenuation: 200 MHzkm / 500 MHzkm
- Min. Overfilled Launch (OFL) Bandwidth: 300 MHzkm / 550 MHzkm
- Serial 1 Gigabit Ethernet: 33 MHz*km/ 850 nm / 1300 nm OM1
Product Usage Instructions
Installation
- Ensure the environmental conditions meet the specified temperature ranges for installation.
- Select appropriate mounting locations for outdoor aerial or duct installations.
- Handle the cable carefully to avoid damage to the outer jacket and buffer tubes.
- Securely fasten the cable using suitable clamps or supports.
Maintenance
To ensure optimal performance and longevity of the cable:
- Regularly inspect the cable for any signs of wear or damage.
- Keep the cable clean and free from debris.
- Avoid sharp bends or excessive tension during handling or installation.
- Follow recommended testing procedures to verify cable integrity.
FAQ
-
Q: What is the maximum tensile strength of the cable?
A: The cable has a maximum tensile strength of 2700 N (606.98 lbf) for short- term loading. -
Q: What is the flame rating of the cable?
A: The cable has a flame-retardant rating and is made of non-corrosive/low- smoke, zero-halogen material.
Part Number:
024KUZ-T4130D20
Corning LSZH™ loose tube gel-free cables are flame-retardant, indoor/outdoor,
suitable for installation in interbuilding and intrabuilding applications. The
loose tube design offers mechanical ruggedness and environmental durability
while the all-dielectric cable construction requires no grounding or bonding.
The water-swellable yarn eliminates the need for gelfilling compound and
allows more efficient and craft-friendly cable preparation. The 250 μm color-
coded fibers allow quick and easy identification during installation. Corning
LSZH cables eliminate risks in the event of a fire as the LSZH compound does
not drip when superheated. The material burns to ash, eliminating the onset of
secondary fires. When cables containing halogens ignite, they emit highly
reactive gases that can be harmful if inhaled. When halogens combine with
water, acids are formed. These acids damage both living tissue and inorganic
materials, such as metal and electronic equipment.
The flexible, flame-retardant outer jacket is UV-resistant and enables direct
exposure to sunlight. Interlocking armor is available for special applications
requiring additional mechanical durability.
Features and Benefits
-
Low-smoke, zero-halogen sheath
Key life-safety benefit -
Meets cyclic impact and chemical resistance test
Superior performance -
Common installations
Outdoor aerial and duct
LSZH™ Loose Tube, Gel-Free, Single-Jacket Cable, 24 F, 62.5 μm multimode (OM1)
LSZH™ Loose Tube, Gel-Free, Single-Jacket Cable, 24 F, 62.5 μm multimode (OM1)
Specifications
General Specifications
- Environment Indoor/Outdoor
- Cable Type Loose Tube
- Product Type Dielectric
- Fiber Category 62.5 μm MM (OM1)
- Flame Rating LSZH (OFN-LS)
- Application Aerial, Direct Buried, Duct, General Purpose Horizontal
- Fiber Count 24
Standards
- RoHS Free of hazardous substances according to RoHS 2011/65/EU
- Approvals and Listings National Electrical Code® (NEC®) OFCR-LS/Riser, Sunlight Resistant (SUN RES), IEEE-1202 flame test, Suitable for Direct Burial (DIR BUR), IEC 60332-3, IEC 60754-2, IEC 61034
- Common Installations Outdoor aerial and duct; indoor general purpose horizontal according to NEC Article 770
- Design and Test Criteria ANSI/ICEA S-104-696, UL 13, UL 444, UL 1277, UL 1685, CSA C22.2, No. 230 and No. 232, CSA OFC (FT-4-S1)
Environmental Conditions
- Temperature Range, Installation -30 °C to 60 °C (-22 °F to 140 °F )
- Temperature Range, Operation -40 °C to 70 °C (-40 °F to 158 °F )
- Temperature Range, Storage -40 °C to 70 °C (-40 °F to 158 °F )
Cable Design
- Central Element Dielectric
- Fiber Count 24
- Number of Ripcords 2
Cable Design
- Outer Jacket Color Black
- Outer Jacket Material Flame-retardant, non-corrosive/low-smoke, zero-halogen (FRNC/LSZH) material
- Buffer Tube Color Blue, Orange
- Buffer Tube Diameter 2.5 mm (0.1 in)
- Number of Active Tubes 2
- Number of Filling Elements 4
- Number of Tube Positions 6
- Tape Water-swellable
- Tape, Layer 2 Flame-retardant tape
- Tape, Layer 3 Water-swellable
- Fiber Coloring Blue, Orange, Green, Brown, Slate, White, Red, Black, Yellow,
- Violet, Rose, Aqua
- Fibers per Tube 12
- Color Code Standards Telcordia
Mechanical Specifications
- Max. Tensile Strength, Long-Term 810 N (182.1 lbf)
- Max. Tensile Strength, Short-Term 2700 N (606.98 lbf)
- Min. Bend Radius Installation 192 mm (7.56 in)
- Min. Bend Radius Operation 128 mm (5.04 in)
- Nominal Outer Diameter 12.8 mm (0.5 in )
Optical Characteristics
- Fiber Code K
- Fiber Type Multimode
- Performance Option Code 30
- Fiber Core Diameter 62.5 μm
Optical Characteristics
- Minimum Effective Modal Bandwidth (EMB) 220 MHz*km / –
- Maximum Attenuation 3.4 dB/km / 1.0 dB/km
- Min. Overfilled Launch (OFL) Bandwidth 200 MHzkm / 500 MHzkm
- Serial 1 Gigabit Ethernet 300 MHzkm / 550 MHzkm
- Serial 10 Gigabit Ethernet 33 MHz*km/ –
- Wavelengths 850 nm / 1300 nm
- Fiber Category OM1
Dimensions
- Cable Weight 152 kg/km (102.14 lb/1000 ft)
Corning Optical Communications LLC
4200 Corning Place
Charlotte, NC
28216
United States
800-743-2675
FAX : 828-325-5060
International : +1-828-901-5000
www.corning.com/opcomm
A complete listing of the trademarks of Corning Optical Communications is
available at www.corning.com/opcomm/trademarks. All other trademarks are the
properties of their respective owners. Corning Optical Communications is ISO
9001 certified. © 2024 Corning Optical Communications. All rights reserved.
LSZH™ Loose Tube, Gel-Free, Single-Jacket
Cable 24 F, 62.5 μm multimode (OM1)
Product Specification 024KUZ-T4130D20_NAFTA_AEN
References
- Corning Optical Communications | Fiber Optic Connectivity Solutions | Corning
- Legal Notices | Corning.com
- Corning Optical Communications | Fiber Optic Connectivity Solutions | Corning
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>