TITAN SJ-35 Sliding Bridge Jack Instruction Manual
- August 23, 2024
- Titan
Table of Contents
- TITAN SJ-35 Sliding Bridge Jack Instruction Manual
- To Our Valued Customers:
- TITAN MARKETING, LLC
- ARBITRATION NOTICE
- WARRANTY NOTICE
- INSTRUCTIONS
- UNPACKING AND SET-UP
- lifting points prior to lifting.
- OPERATION & MAINTENANCE
- PARTS DIAGRAM
- PARTS LIST
- WARRANTY REGISTRATION
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TITAN SJ-35 Sliding Bridge Jack Instruction Manual
To Our Valued Customers:
TITAN MARKETING, LLC
PO Box 7069 Greenwood, IN 46142
1.888.908-4826 FAX (317)
215.2770www.titanlifts.com
Thank you for purchasing a Titan Lifts® product. We hope this high quality equipment provides you with years of dependable service.
It is unfortunate that rare situations may occur with the products you
purchase from Titan Lifts®. We value your business as well as the trust you
have and need to maintain your relationship with us. Titan Lifts® carries
liability coverage that may protect our customers if a situation does occur.
However, as in all accidents there must be proof of liability for a claim to
be made. Our insurance company requires the following procedures be observed
in order to consider a claim:
A. The claimant must contact the Titan Lifts® distributor immediately with
the facts of the situation.
B. If any equipment is damaged, including vehicles or shop equipment, Titan
Lifts® must be given the opportunity to send an impartial representative to
the site for proper assessment of the situation.
C. The Vehicle cannot be moved until either an impartial representative has
reviewed the accident or clear and precise pictures are taken that reflect all
the pertinent information for an impartial representative to be able to access
the information from a distance. Titan Lifts® or its representatives must
approve the pictures before anything can be moved.
D. If any potential liability is determined on behalf of Titan Lifts®, two
estimates must be submitted for damages to be reimbursed.
It is imperative that the claimant complies with these procedures, because
without proper assessment of the situation a claim will be denied.
ARBITRATION NOTICE
The installation or use of this equipment shall constitute an acknowledgement that the user agrees to resolve any and all disputes or claims of any kind whatsoever, which relate in any way to the equipment, by way of binding arbitration, not litigation. No suit or legal action may be filed in any state or federal court. Any arbitration shall be governed by the Federal Arbitration Act, and administered by the American Mediation Association, Indianapolis Indiana. The maximum amount that an arbitrator may award and all damages shall not exceed the retail value of this equipment.
WARRANTY NOTICE
This equipment must be assembled and used in the manner according to the
documentation provided to be covered by warranty.Damaged or missing components
must be reported within 72 hours of receipt to your freight carrier and to the
distributor. Claims must be filed to cover cost.
If you have any questions or if we can be of any further assistance, please
don’t hesitate to contact a Titan Lifts® representative at
1-888-908-4826. Thank you for the
opportunity to continue to serve your lift equipment needs.
INSTRUCTIONS
WARNING: READ ENTIRE MANUAL AND COMPLY WITH ALL SAFETY AND SERVICE
PRECAUTIONS. DEATH, PERSONAL INJURY AND / OR PROPERTY DAMAGE MAY OCCUR IF INSTRUCTIONS ARE NOT FOLLOWED CAREFULLY.
UNPACKING AND SET-UP
- Carefully unpack the lift making sure that all of the parts have been included.
- Make sure to use the lift on a clean, smooth solid surface.
- Place the lift saddles firmly positioned on the frame, solid surface, or manufacturers recommended
lifting points prior to lifting.
OPERATION & MAINTENANCE
- All moving parts have been lubricated at the factory and should be re-lubricated before the first useand at least once every six months to prevent damage.
- Do not use this product if worn or damaged. Examine lift for structural cracks, bends, or other signs of damage prior to each use to ensure safe proper working condition.
- Keep the lift clean, dry, and well maintained to extend longevity of the product.
- When not in use, the lift must be stored in the lowest position, in a dry location.
- Use this as a secondary lift with a balanced load that is firmly positioned and secured at all times.
IMPORTANT: THIS LIFT IS DESIGNED TO BE USED IN CONJUNCTION WITH A
4-POST AUTOMOTIVE LIFT. IT IS INTENDED FOR TEMPORARILY LIFTING AND LOWERING A VEHICLE. IT IS NOT FOR STORAGE OR FOR TRANSPORTING LOADS. DO NOT LEAVE A VEHICLE ON THE LIFT FOR AN EXTENDED PERIOD OF TIME. DAMAGE TO THE JACK OR OTHER PROPERTY MAY RESULT.
WARNING: NEVER GO UNDER A RAISED VEHICLE UNLESS THERE ARE SAFETY
JACK STANDS IN PLACE.
WARNING: VEHICLE WHEELS MUST BE CHOCKED & PARKING BRAKE SET PRIOR TO
USING
PARTS DIAGRAM
PARTS LIST
PART # | CODE | DESCRIPTION | QTY |
---|---|---|---|
1 | TT-4111-02-00 | UPPER PANEL | 1 |
2 | GB70.1-2000 M8×12 | INNER SOCKET HEAD CAP SCREW | 8 |
3 | QYS-300-10-03-02 | STOP SLIDER | 2 |
4 | QYS-300-10-03-01 | MOLD INSERT | 4 |
5 | QYS-300-10-02 | SUPPORT PLATE | 2 |
6 | TPF4-400-03 | SHORT ADAPTER | 2 |
6.1 | TPF4-400-03 | LONG ADAPTER | 2 |
7 | TT-4111-00-01 | PANEL SHAFT | 4 |
8 | DPF4-3.2-700-03 | BAYONET LOCK | 3 |
9 | TT-4111-05-00 | INNER KNIFE ARM | 1 |
10 | TT-4111-04-00 | OUTTER KNIFE ARM | 1 |
11 | TT-4111-00-02 | SLIDING BLOCK | 4 |
12 | TT-4111-00-03 | MEDIAL AXIS | 1 |
13 | GB97.2-1985 D14 | FLAT WASHER | 2 |
14 | GB812-1988 M14X1.5-N | ROUND NUT | 4 |
15 | TT-4111-07-00 | SAFETY TEETH | 1 |
16 | TT-4111-00-04 | SHAFT | 1 |
17 | TT-4111-00-10 | SAFETY SHAFT | 1 |
18 | TT-4111-00-06 | CYLINDER SHAFT | 1 |
19 | TT-4111-00-07 | SAFETY SHAFT | 1 |
20 | TT-4111-00-09 | ROLLER | 2 |
21 | GB894.1-1986 D25 | EXTERNAL CIRCLIP | 4 |
22 | TT-4111-00-08 | RETAINING RING | 2 |
23 | TT-4111-00-05 | SHAFT | 1 |
24 | TT-4111-03-00 | SAFETY RACK | 1 |
25 | GB78-2000 M8X10 | HEXAGON SOCKET SET SCREW WITH CONE POINT | 4 |
26 | TT-4111-06-00 | DRAWER | 2 |
27 | TT-4111-00-12 | NYLON BLOCK | 4 |
28 | GB819-2000 M6X10 | CROSS RECESSED COUNTERSUNK HEAD SCREW | 16 |
29 | TT-4111-01-00 | BOTTOM FRAME | 1 |
30 | GB70.1-2000 M8X20 | HEX CYLINDER SCREW | 4 |
31 | GB/6170-2000 M8 | HEX NUT | 4 |
32 | GB70.1-2000 M8X25 | HEX NUT | 4 |
33 | BAKELITE BALL | 1 | |
34 | TT-4111-00-11 | MANUAL LEVER | 1 |
35 | GB70.1-2000 M8X35 | HEX CYLINDER SCREW | 1 |
36 | TT-4111-MP | HYDRAULIC MANUAL PUMP | 1 |
37 | TT-4111-CY | CYLINDER ASSEMBLY | 1 |
38 | TT-4122-800-04 | RIGHT ANGLE INSIDE AND OUTSIDE FITTING | 1 |
39 | TT-4111-00-13 | HYDRAULIC HOSE | 1 |
40 | QYS-500-08 | RIGHT-ANGLE CONNECTOR | 1 |
WARRANTY REGISTRATION
In order to utilize the warranty on this Titan Lifts product, you must register your product with us. The simplest way to do this is to visit TITANLIFTS.COM/WARRANTIES and submit your information online. If you prefer to send your information through the mail, please fill out the form below and send this page to us at :
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>