TITAN ARMY P27A2R 27 Inch Gaming Monitor User Manual

TITAN ARMY P27A2R 27 Inch Gaming Monitor

Precautions

• Keep the monitor away from water sources or damp places, such as bathrooms, kitchens, basements and swimming pools.
• Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause human injury or device damage.
• Store and use the monitor in a cool, dry and well-ventilated place, and keep it away from emission and heat sources.
• Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or similar objects.
• The range of the supply voltage of the monitor is printed on the label on the rear casing. If it is impossible to determine the supply voltage, please consult the distributor or local power company.
• If the monitor will not be used for a long period, please cut off the power supply to avoid electric shock in rainy days and damage due to abnormal supply voltage.
• Please use a reliable grounded socket, Do not overload the socket, or it may cause fire or electric shock.
• Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or electric shock.
• Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please contact the after-sales service directly.
• Do not pull or twist the power cable forcedly.
• There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, or the product may be damaged and the warranty will be invalid.

Package Content

Packing list

Please check that the package of the monitor contains all parts. If any part is lost, please contact the distributor. The color and shape of parts may vary with models. Figures in this User Manual are for reference only. Cables supplied may vary with purchased products. Figures in this User Manual are for reference only

Installation

Installation of base

1. Open the package to take out foams and put them on a at tabletop.
2. Remove the upper foam cover and put it aside, take out the monitor film bag and put the monitor in the lower foam cover.
3. Take out the base and stand, and use the thumb screw of the base to lock the stand.
4. Align the base and stand components assembled in Step 3 to the slot of the machine and clip them. (Note: Slide the quick disassembly button up with ngers to take out the base and stand components)
5. Simply hold the stand with hand to stand the monitor upright.

Note: During standing of the whole monitor, do not press the liquid crystal screen with hand to avoid damage to the screen.

Installation of mount

1. Open the package, take out the product with foam still attached, and gently place it on a desktop or table. Remove the extra parts and the foam covering the monitor. If the monitor was already attached to the stand, remove the stand.
2. Take out the four hexagon irons from the accessory bag. Assemble them in the middle of the whole machine and lock them with a screwdriver. Do not take the screen out from the foam to avoid damage to the screen.
3. Note: Hang the assembled product on a hard wall. Do not pinch the screen with your hands during the hanging process to avoid damaging the screen.

Note: In order to prevent the monitor from falling when it is used on the wall, please install it properly and do safety protection. Do not place or hang any objects on the wall bracket, and the wall height should be within 2 meters

Adjustment of monitor

Instructions for use

Description of buttons

menu.
5| Right rocker button: Press to enter sub-menus/ quickly enter the main menu.

Explanation of indicators

Indicator: Steady blue light indicates that power is on and the monitor is operating normally. A red light indicates no video source, no horizontal or vertical signal detected or low voltage. No light indicates a shutdown condition. Make sure your computer is turned on and that all video cables are fully plugged in and/or connected.

Cable connection

•  The bottom interface configuration at the back of the monitor varies with products.
•  Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or special components purchased from the manufacturer or maintenance department.

HDMI interface

• Use the HDMI cable to connect the HDMI IN interface of the product to the HDMI OUT interface of a PC.
• Use the HDMI-DVI cable to connect the HDMI IN interface of the product to the DVI OUT interface of a PC. (In general, PCs do not transfer video signals to the monitor through the DVI OUT interface , and it is necessary to connect a loudspeaker box additionally to play sounds of PCs.)

OSD menu

Menu description

• The colour and shape of the OSD menu of the actual computer may be slightly different from those shown in the figure.
• Specifications of the OSD menu may change with improvements of functions without prior notice.

Press the menu button on the control panel to access the monitor menu. The detailed information of each menu can be found in the following sections.

1. Rocker key (Right) to enter the OSD main menu or enter sub-menus.
2. Rocker key (Up) to enter the Contextual Model or move up in the menu.
3. Rocker key (Down) to enter the GamePlus Switching or move down in the menu.
4. Rocker key (Left) to enter the Input Signal or exit the current screen.

• • Functions of the monitor vary with models, and the functions in this manual are for reference only.

Game Settings

| Standard Mode| Off/On
---|---|---
RTS/RPG Mode| Off/On
FPS Arena Mode| Off/On
MOBA Arena Mode| Off/On
Adaptive-Sync| Off/On
Shadow Balance| 0-100
Response Time| Off/Normal/Fast/Ultrafast

Refresh Rate

| Off/On
Position: Top Right/Top Left/Bottom Right/Bottom Left

Game Crosshair

| Off
On: Crosshair 1/Crosshair 2/Crosshair 3/Crosshair 4/Crosshair 5/Crosshair 6
Game Time| Off
On: 15:00/30:00/45:00/60:00
Dynamic Brightness| Off/Normal/Expert/Elaboration

Picture Settings

| Brightness| 0-100
Contrast| 0-100
DCR| Off/On
Contextual Model| Off
On：Movie Mode/Reading Mode/Night Mode
Low Blue Light| 0-100
Sharpness| 0-5
Gamma| 1.8/2.0/2.2/2.4/2.6/ S.curve
Aspect Ratio| Wide Screen/4:3/1:1/Auto

Color Settings

| Warm| Off/On
Natural| Off/On
Cool| Off/On
User1| Off/On
User2| Off/On
User3| Off/On
Hue| R/G/B/C/M/Y: 0-100
Saturation| R/G/B/C/M/Y: 0-100

PIP/PBP

| PIP/PBP mode| Off/PIP Mode/PBP 2Win 1:1
---|---|---
Sub-Signal Source| DP1/DP2/HDMI1/HDMI2
Audio Source| Auto/DP1/DP2/HDMI1/HDMI2
PIP Position| Top Right/Top Left/Bottom Right/Bottom Left
PIP Size| Small/Medium/Large
Window Swap| Off/On

OSD Settings

|

Language

| 简体中文/English/한국어/  /Portugues do Brasilazil/Deutsch/Nederland/Suomi/Français/ Ελληνικά/Indonesia/Italiano/日本語/Malaysia/ Polskie/Português/PyccK11/Españo/ไทย/

YKpa’iHcbKa/Tiếng Việt/繁体中文/Türkçe

OSD Time Out| 5-100
OSD H-Position| 0-100
OSD V-Position| 0-100
OSD Transparency| 0-5
Hotkey1 Settings| Brightness/Contrast/Volume/Mute/Shadow Balance/Game Crosshair/ Refresh Rate/Game Time /Contextual Model/PIP/PBP Mode/Input Signal/ Dynamic Brightness
Hotkey2 Settings| Brightness/Contrast/Volume/Mute/Shadow Balance/Game Crosshair/ Refresh Rate/Game Time /Contextual Model/PIP/PBP Mode/Input Signal/ Dynamic Brightness
Hotkey3 Setting| Brightness/Contrast/Volume/Mute/Shadow Balance/Game Crosshair/ Refresh Rate/Game Time /Contextual Model/PIP/PBP Mode/Input Signal/ Dynamic Brightness
OSD Rotation| Normal/90/180/270
OSD Lock| Off/On

Other Settings

| Input Signal| Auto/DP1/DP2/HDMI1/HDMI2
Volume| 0-100
Mute| Off/On
Auto Power| Off/On
Eyeshield Remind| Off/On
Reset| No/Yes
Information| Input Source/Resolution/Mode

Basic parameters

Environmental conditions

| Action| Temperature: 0°C~ 40°C (32°F ~ 104°F) Humidity: 10%~90% RH (non- condensing)
Storage| Temperature: -20°~ 60° (-4°F ~ 140°F) Humidity: 5%~95% RH (non- condensing)

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

“This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.”

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>