TITAN TTB958GLG Cordless Glue Gun User Guide

June 1, 2024
Titan

TITAN logo 3.6V
Cordless Glue Gun

TITAN TTB958GLG Cordless Glue Gun TTB958GLG
5063022074249

TTB958GLG Cordless Glue Gun

CAUTION: Read the instructions before using the product.

V30523 / BX220IM

Let’s
get started…

These instructions are for your safety. Please read through them thoroughly prior to handling the product and retain them for future reference.

Getting started…

Safety warnings

General safety warnings
a) This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
b) Children shall not play with the appliance.
c) Cleaning and user maintenance shall not be made by children without supervision. Keep the appliance and its cord out of reach of children aged less than 8 years.
d) Familiarise yourselfwiththe operation, adjustments and functions. Follow the safety and operation instructions in order to avoid possible risks and hazards.
e) Contact a qualified person or your dealer if you have questions after reading the instruction manual.
f) Store the instruction manual so that it is accessible for all users. Also relay it when giving the product to others.
g) Do not attempt to modify the product in any way. Only use attachments and accessories recommended by the manufacturer.
h) Use the product only in accordance with this instruction manual. Misuse and incorrect handling will lead to hazards for people and property.
i) Do not use the product if damage is visible. Check the housing before each use. Faulty products must be repaired or properly disposed of.
j) Switch the product off immediately if the product is damaged or if a breakdown occurs.
k) Have the product repaired only by a qualified specialist. Improper repairs can lead to electric shocks or other accidents.
l) This appliance contains batteries that are nonreplaceable.
m) WARNING: For the purposes of recharging the battery, only use the detachable supply unit (TTB994CHR) provided with this appliance.

Glue gun safety warnings
a) Place the glue gun on a stable, level surface by using its stand holder (9) when not in use.
b) A fire can occur if the tool is not handled with care.

  • Be careful when using the tool near flammable materials.
  • Do not aim at the same spot for a long time.
  • Donotuse in the presence of an explosive atmosphere.
  • Heat can be directed to flammable materials that are concealed.
  • After use, place on the stand and allow to cool before packing away.
  • Do not leave the tool unattended while it is in operation.

c) The adhesive can produce harmful fumes when the glue stick is heated.

  • Do not inhale fumes generated during bonding. Ensure adequate ventilation during use. If adequate ventilation is not provided, respiratory protection should be worn.
  • Thoroughly clean clothing that comes into contact with adhesive.

d) Use only glue sticks with suitable dimensions (approx. Ø7 mm x 100 mm).
e) Keep fingers away from the metal nozzle, it becomes very hot during use. Wear gloves to protect the hands.
f) Always keep nozzle away from the cord.
g) Do not touch the nozzle to any surface while running or shortly after running.
h) Maintain labels and nameplates. These carry important information.
i) Do not expose tools to rain or wet conditions. Water entering a tool will increase the risk of electric shock.
j) Have your tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the tool is maintained.
k) Switch the product off and allow the hot glue gun to cool down for at least 15 minutes before carrying out maintenance or cleaning work.
l) Inspect and maintain the product regularly. Have the product repaired only by an authorized repairer.
m) When not in use, store the product out of the reach of children. Tools are dangerous in the hands of untrained users.
n) Store the product in a location where the ambient temperature is between 0°C and 40°C.
0) Do not allow the hot glue or the nozzle to come into contact with people or animals. Their temperature can reach up to 170°C. If in contact, immediately rinse the affected area under cold running water. Do not attempt to remove the glue from the skin. Pease consult a doctor for medical care.

Safety warnings specific for built-in battery

a) Recharge only with the power adaptor specified by the manufacturer. A power adaptor that is suitable for one type of battery may create a risk of fire when used with another battery.
b) Keep the battery away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
c) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
d) Do not use a battery or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
e) Do not expose a battery or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
f) Follow all charging instructions and do not charge the battery or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
g) Battery needs to be charged before use. Always refer to the power adaptor’s instruction and charge it properly.
h) Don’t maintain the battery on the power adaptor when not in use.
i) After extended periods of storage, it may be necessary to charge and discharge the battery several times to obtain the maximum performance.
j) Longer life and better performance can be obtained if the battery is charged when the air temperature is between 18°C and 24°C. Do not charge the battery in air temperature below 5°C or above 40°C. This is important as it can prevent serious damage to the battery.
k) Do not charge battery in a damp or wet location. Following this rule will reduce the risk of electric shock.
l) Do not disassemble the battery and avoid mechanical damage to the battery. Risk of short circuit and fumes may be emitted. Ensure fresh air and seek medical assistance in the event of discomfort.
m) Never service damaged battery. Service of battery should only be performed by the manufacturer or authorized service providers.
n) When disposing of battery, keep the battery of different electrochemical systems separate from each other.

Safety warnings specific for power adaptor
WARNING! Read all safety warnings, instructions, illustrations and specifications. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.

a) This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
b) Only use the supplied power adaptor, the charger cable to charge the built- in battery in the glue gun.
c) Do not change any batteries other than the one specified in this manual.
d) If the power adaptor is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
e) Disconnect the power adaptor from the power supply and allow it to cool down before cleaning, maintenance, storage and transportation.
f) Do not expose the power adaptor to rain or wet conditions. Do not immerse such parts in water or other liquids to avoid electrical shock. Never hold the power adaptor under running water. Water entering the power adaptor will increase the risk of electric shock.
g) Before using the power adaptor, read all the instructions and cautionary markings on the power adaptor.
h) Use the power adaptor indoors only as the power adaptor is designed for indoor use only.
i) Do not place any object on top of the power adaptor as it could cause overheating. Do not place the power adaptor near any heat source.
j) Do not use the power adaptor if it has been subjected to a heavy knock, dropped or otherwise damaged in any way. Have the power adaptor checked and repaired by an authorised service centre.
k) Do not disassemble the power adaptor. Incorrect reassembly may result in the risk of fire, electric shock or electrocution.
l) To reduce the risk of damage to the power cord and plug, always pull the plug rather than the power cord when disconnecting the power adaptor from power supply.

Emergency
Familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety directions and follow them to the letter. This will help to prevent risks and hazards.
a) Always be alert when using this product, so that you can recognise and handle risks early. Fast intervention can prevent serious injury and damage to property.
b) Switch the product off if there are malfunctions.
Have the product checked by a qualified professional and repaired, if necessary, before you operate it again.

WARNING! This product produces an electromagnetic field during operation! This field may under some circumstances interfere with active or passive medical implants! To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their doctor and the medical implant manufacturer before operating this product!

Symbols

On the product, the rating label and within these instructions, you will find among others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property.

V ~ Volt, (alternating voltage)
V **** Volt, (direct current voltage)
min Minute
°C Degree Celsius
g Gram
Polarity
Read the instruction manual.
Hz Hertz
W Watt
h Hour
mAh Milliampere per hour
mm Millimetre
Short-circuit-proof safety isolating transformer
Note / Remark.
Caution / Warning.
SMPS (Switch mode power supply unit)
IPX0 Protection against ingress of the solid foreign objects having a

diameter of 12.5 mm and greater.
yyWxx| Manufacturing date code; year of manufacturing (20yy) and week of manufacturing (Wxx)
| Wear eye protection.
| Wear a dust mask.
| Wear protective gloves.
| Hot surface. Risk of scalding.
| This glue gun is of protection class III.
Icon| This power adaptor is of protection class II. That means it is equipped with enhanced or double insulation.
| Only charge and use the product indoors.
| Do not use the power adaptor if the pins are damaged in anyway.
| Switch the product off before assembly, cleaning, adjustments, maintenance, storage and transportation.
| WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.
| Crossed out dust bin. Batteries should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.
| Do not dispose of battery in rivers or immerse in water.
| Do not dispose of battery in fire. They will explode and cause injury.
| Do not expose battery to heat in excess of 40 ºC.
Do not charge or store the battery in temperatures below 5 °C (41°F) and above 40°C (104°F).
| The product complies with the applicable European directives and an evaluation method of conformity for these directives was done.
| UK Conformity Assessed.

Rating label explanation

Model Number = TTB958GLG
TT = TTIAN (brand)
B = Voltage (230-240 V~)
958 = Sequential Code
GLG = Glue Gun

Model Number: TTB994CHR
TT = TTIAN (brand)
B = Voltage (230-240 V~)
994 = Sequential Code
CHR = Charger

Your product

TITAN TTB958GLG Cordless Glue Gun - Parts

1. Nozzle
2. Temperature indicator
3. Power / charging status indicator
4. On/off switch
5. Feeding channel
6. Main grip
7. Type-C port
8. Trigger| 9. Stand holder
10. Power adaptor
a. Plug
b. USB port
11. Charger cable
a. USB plug
b. Type-C plug
12. Glue stick (Ø 7 x 100 mm) (x12)
---|---

Technical specifications

General

Rated voltage| : 3.6 V *
Battery (built-in) type| : Lithium-Ion
Battery capacity| : 2000 mAh
Heating time| : 2 min
Temperature| : 170ºC
Degree of protection| : IPX0
Protection class| : III
Weight| : approx. 190 g
Dimensions| : approx. 140
110*37 mm
Power adaptor
Model no.| : MCB995CHR
Rated input| : 100-240 V~, 50-60 Hz, 10 W
Rated output| : 5 V **
, 500 mA, 2.5 W
Charging time| : approx. 3 – 5 h
Protection class| : II Icon
Weight| : approx. 60 g
Ambient temperature range for power adaptor and product use| : 5-25°C
Glue stick
Diameter| : Ø 7 mm
Length| : 100 mm

Unpacking

  1. Unpack all parts and lay them on a flat, stable surface.
  2. Remove all packing materials and shipping devices if applicable.
  3. Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer. Using an incomplete or damaged product represents a hazard to people and property.
  4. Ensure that you have all the accessories and tools needed for assembly and operation. This also includes suitable personal protective equipment.

WARNING! The product and the packaging are not children’s toys!
Children must not play with plastic bags, sheets and small parts!
There is a danger of choking and suffocation!

You will need

(items not supplied)
Suitable personal protective equipment Heat proof tray to sit the product on to protect the work surface

(items supplied)
Power adaptor (10)
Charger cable (11)
Glue stick (Ø 7mm) (x 12 pcs) (12)

NOTE: The accessories required depend on the intended application.
Ask your dealer for advice.

Setup

WARNING! Before using the product, familiarise yourself with the operating features read the entire instruction manual paying particular attention to the safety rules and operating procedures.

Stand holder

  1. Unfold and swivel the stand holder (9) forward until it stops (Fig. 1).
  2. Place the glue gun on a stable, level surface by using its stand holder (9) as shown in Fig. 2 when not in use.

TITAN TTB958GLG Cordless Glue Gun - Stand holder

Before you start

Glue stick

WARNING! Always use the correct glue stick according to the intended use!
Observe the technical requirements of this product (see section “Technical specifications” and the marking on the front housing when purchasing and using the glue stick (12)!

Insert the glue stick

  1. Check the size of glue stick (12) is between 6.8-7.5 mm in diameter.
  2. Align and insert the glue stick (12) into the feeding channel (5) until it stops (Fig. 3).

WARNING! Do not try to remove the used glue stick (12) from the feeding channel (5). Once used, a glue stick (12) must be used up completely.

Built-in battery
Charging the built-in battery
The built-in battery has been shipped in a low charge condition. Charge it fully before first use.

  1. To charge the built-in battery, align and insert the type-C plug (11b) of the charger cable (11) to the type-C port (7) of the product (Fig. 4, step 1), then align and insert the USB plug (11a) of the charger cable (11) to the USB port (10b) of the power adaptor (10) (Fig. 4, step 2).TITAN TTB958GLG Cordless Glue Gun - built-in battery

  2. Plug the power adaptor (10) into a plug socket.
    WARNING! Check the voltage! The voltage must comply with the information on the rating label!

  3. The charging process will begin:
    • Charging: The charging status indicator (3) turns red (Fig. 5).
    • Fully charged: The charging status indicator (3) turns green and the charging time is approx. 3 – 5 h.

  4. Remove the power adaptor plug (10a) from the power supply on completion of charging.

  5. Remove the charger cable (11) from the product.

Built-in battery

NOTE: It is normal for the built-in battery and the power adaptor (10) to become warm (but not hot) during the charging process.
Depending on temperature and existing charge level, the actual charging time may change.
NOTE: Always charge the built-in battery before storage!
Please charge the built-in battery to reach full or no less than half charge before storage. If the product will not be used for long periods of time, charge the built-in battery every 3-6 months.
It is important to disconnect the power adaptor (10) from the power supply after charging finished.

In more detail…

Product functions & settings

Intended use
This cordless glue gun TTB958GLG is designated with a rated voltage of 3.6 V ****.
The glue gun is exclusively designed for processing hot glue for bonding materials such as paper, wood, cardboard, plastic, leather, ceramics, glass, fabric, etc.
Use the hot glue gun only as described in this manual. Any other use is considered not to be intended and may lead to property damage or even personal injury. The hot glue gun is not a child’s toy.
The manufacturer or dealer accepts no liability for damages caused by improper use or misuse.

For safety reasons it is essential to read the entire instruction manual before first operation and to observe all the instructions therein.
This product is intended for private domestic use only, not for any commercial trade use.

Switching on/off

  1. Press and hold the on/off switch (4) for 3 seconds to turn on the product (Fig. 6). The power indicator (3) turn green and the temperature indicator (2) turn red.

  2. Pre-heat the hot glue gun for 2 min to reach the melting temperature, and the temperature indicator (2) turns green.
    The product is ready for use.

  3. Keep pressing the on/off switch (4) for 1 second to turn off the product.

TITAN TTB958GLG Cordless Glue Gun - Switching on off

| WARNING! Risking of scalding. The nozzle (1) and melt adhesive are very hot. Do not touch them.
Wear protective gloves.
---|---

Indicators

The indicators (2, 3) show the working / charging status as below:

Temperature indicator (2) Power / charging status indicator (3) Remark
Red Charging
Green Charging is finished
Flashing in red Low battery, charge the product
Red Green Switch on the product and the pre-heat starts
Green Green Preheat is finished, the product is ready to use

Trigger

  1. Pull the trigger (8) to start the glue flowing (Fig. 7).
  2. Release the trigger (8) to stop the flow of the glue.

TITAN TTB958GLG Cordless Glue Gun - Trigger

Automatic power off
The hot glue gun switches off automatically after 5 minutes if the trigger (8) has not been actuated during this period.

Operation

General operation

  1. Check the product, as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear. Take care of any problem you find or have the product checked by qualified specialist.
  2. Double check that the accessories are properly fixed.
  3. Always hold the product on the main grip (6). Keep the handle dry to ensure safe operation.
  4. Ensure that the air vents are always unobstructed and clear. Clean them if necessary with a soft brush. Blocked air vents may lead to overheating and damage the product.
  5. Switch the product off immsediately if you are disturbed while working by other people entering the working area. Always place the glue gun on a stable, level surface by using its stand holder (9) when not in use.
  6. Do not overwork yourself. Take regular breaks to ensure you can concentrate on the work and have full control over the product.

General

| WARNING! During operation harmful fumes will be generated!
Do not inhale fumes during operation, always wear a dust mask to protect yourself against hazards resulting from harmful fumes!
Hot surface. Risk of scalding!
The nozzle (1) and melt adhesive are very hot. Always wear protective gloves when using the product. Improper handling could lead to injury.
---|---

Preparation of the adhesive areas

  1. Adhesive areas must be clean, dry and grease-free.
  2. Rough smooth surfaces before gluing.
  3. Slightly heat steel and other fast cooling material to obtain better adhesive adhesion.
  4. Do not use flammable solvents to clean the adhesive areas.
  5. The ambient temperature and the temperature of the material to be bonded shall not be lower than 10°C and not higher than 40°C.

Glue operation

  1. Choose a suitable, non-flammable working surface for the use of the hot glue gun.

  2. Slide a glue stick (12) in the feed channel (5) until it stops.

  3. To turn on the hot glue gun, press and hold the on/off switch (4) for 3 second until the power indicator (3) turns green and the temperature indicator (2) turns red.

  4. Let the hot glue gun preheat before using the trigger (8). When the hot glue gun has reached its working temperature, the temperature indicator (2) turns green.
    NOTE: The adhesive will soon harden. It is important to quickly bond materials together. Press them together for approximately 30 seconds. After about 5 minutes, the bonding area becomes elastic. Please note that this information depends on temperature and material.

  5. Close the stand holder (9).

  6. Always hold the main grip (6) and point the nozzle (1) of the glue gun on the surface to be processed and apply the glue by keeping the trigger (8) pressed evenly. Repeat this step as needed. If it becomes hard to squeeze more glue out, just wait 15 seconds for the new section of glue to melt in the feeding channel (5) (Fig. 8).TITAN TTB958GLG Cordless Glue Gun - Glue operation

  7. If you need to put the glue gun down, always ensure you unfold the stand holder (9) and place it on a level heat proof surface.

  8. Put a heat proof tray (not supplied) under the nozzle to collect glue drops.

NOTE: When the glue stick is worn out so that it cannot be pushed further into the nozzle (1) with the trigger (8), insert a new glue stick with the same type in the feed channel (5) until it stops. Do not try to remove the used glue stick from the feeding channel (5). Once used, a glue stick (12) must be used up completely.

Operation / Care and maintenance

After use

  1. Press the on/off switch (4) for 1 second to turn off the product. Ensure that the temperature indicator (2) and the power indicator (3) go out.

  2. Place the glue gun on a stable, level surface by using its stand holder (9) when not in use.
    WARNING!
    Hot surface. Risk of scalding!
    Keep any cord or flammable material away from the nozzle (1).

  3. Allow the hot glue gun to cool down for at least 15 minutes.

  4. Check, clean and store the product as described below.

The golden rules for care

WARNING!
Always switch the product off and let the product cool down before performing inspection, maintenance and cleaning work!

  1. Keep the product clean. Remove debris from it after each use and before storage.
  2. Regular and proper cleaning will help ensure safe use and prolong the life of the product.
  3. Inspect the product before each use for worn and damaged parts. Do not operate it if you find broken and worn parts.

WARNING! Only perform repairs and maintenance work according to these instructions! All further works must be performed by a qualified specialist!

General cleaning

  1. Clean the product with a damp cloth and pH-neutral soap. Use a brush for areas that are hard to reach.

  2. In particular clean the air vents after every use with a cloth and brush.

  3. Remove stubborn dust with high pressure air (max. 3 bar).
    NOTE: Do not use chemical, alkaline, abrasive or other aggressive detergents or disinfectants to clean this product as they might be harmful to its surfaces.

  4. Check for any damage and wear. Repair damages in accordance with this instruction manual or take it to an authorised service centre before using the product again.

Maintenance
Before and after each use, check the product and accessories for wear and damage. If required, exchange them for new ones as described in this instruction manual. Observe the technical requirements.
If the power adaptor (10) or the charger cable (11) is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
WARNING! Do not use the product with a defective or a loose charger cable (11)
Repair
This product does not contain any parts that can be repaired by the consumer.
Contact an authorised service centre or a similarly qualified person to have it checked and repaired.

Storage

  1. Switch the product off and let it cool down.
  2. Clean the product as described above.
  3. Store the product and its accessories in a dark, dry, frost-free, well-ventilated place.
  4. Fold the stand holder (9) up.
  5. Always store the product in a place that is inaccessible to children. The ideal storage temperature is between 10°C and 40°C.
  6. We recommend using the original package for storage or covering the product with a suitable cloth or enclosure to protect it against dust.

Transportation

  1. Switch the product off and let it cool down.
  2. Attach transportation guards, if applicable.
  3. Always carry the product by its main grip (6).
  4. Protect the product from any heavy impact or strong vibrations which may occur during transportation in vehicles.
  5. Secure the product to prevent it from slipping or falling over.

Troubleshooting

Troubleshooting
Suspected malfunctions are often due to causes that the users can fix themselves.
Therefore check the product using this section. In most cases the problem can be solved quickly.

WARNING! Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed by an authorised service centre or a similarly qualified specialist if you cannot solve the problem yourself!

Problem Possible cause Solution
1. Product does not start 1.1. Built-in battery is discharged 1.1. Charge

it
1.2. Built-in battery is damaged| 1.2. Have the product checked by a qualified person
1.3. Charger cable is damaged| 1.3. Purchase a new charger cable
1.4. Power adaptor is damaged| 1.4. Purchase a new power adaptor
1.5. Other electrical defect to the product| 1.5. Have the product checked by a qualified person
2. Product does not reach full power| 2.1. Power adaptor or charger cable is damaged| 2.1. Purchase a new power adaptor
2.2. Low battery capacity| 2.2. Charge the battery
3. Unsatisfactory working result| 3.1. Adhesive areas are not pre-treated| 3.1. Clean and rough the adhesive areas
3.2. Glue gun is not suitable for workpiece material| 3.2. Use glue stick that is suitable for the surface being glued

Recycling and disposal

**** Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or local store for recycling advice.

For further information visitwww.recycle-more.co.uk.

The product comes in a package that protects it against damage during shipping.
Keep the package until you are sure that all parts have been delivered and the product is working properly. Recycle the package afterwards.

Disposal of an exhausted battery
The battery is Li-Ion type. To preserve natural resources, please recycle or dispose of the battery properly. Consult your local waste authority for information regarding available recycling and / or disposal options.
Discharge your battery by operating your tool, then remove the battery from the tool and cover the battery connections with heavy duty adhesive tape to prevent short circuit and energy discharge.

Guarantee

We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product (TITAN logo 3.6V Cordless Glue Gun) has a manufacturer’s guarantee of 2 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost for normal (non-professional or commercial) household use.

To make a claim under this guarantee, you must present your proof of purchase (such as a sales receipt, purchase invoice or other evidence admissible under applicable law), please keep your proof of purchase in a safe place. For this guarantee to apply, the product you purchased must be new, it will not apply to second hand or display products. Unless stated otherwise by applicable law, any replacement product issued under this guarantee will only be guaranteed until expiry of the original guarantee period.

This guarantee covers product failures and malfunctions provided the product was used for the purpose for which it is intended and subject to installation, cleaning, care and maintenance in accordance with the information contained in these terms and conditions, in the user manual and standard practice, provided that standard practice does not conflict with the user manual.
This guarantee does not cover defects and damage caused by normal wear and tear or damage that could be the result of improper use, faulty installation or assembly, neglect, accident, misuse, or modification of the product. Unless stated otherwise by applicable law, this guarantee will not cover, in any case, ancillary costs (shipping, movement, costs of uninstalling and reinstalling, labor etc), or direct and indirect damage.
This guarantee does not cover defects and damage caused by or resulting from:

  • Normal wear and tear
  • Overload, misuse or neglect
  • Repairs attempted by anyone other than an authorized agent
  • Cosmetic damage
  • Damage caused by foreign objects, substances or accidents
  • Accidental damage or modification
  • Failure to follow manufacturer’s guidelines
  • Loss of use of the goods

If the product is defective, we will, within a reasonable time, repair or replace it. Rights under this guarantee are enforceable in the country in which you purchased this product. Guarantee-related queries should be addressed to the store you purchased this product from.
The guarantee is in addition to and does not affect your statutory rights.

EC declaration of conformity

EU DECLARATION OF CONFORMITY
Product

  • Cordless Glue Gun
  • TTB958GLG MCB959GLG
  • Serial number range 000001 to 999999

Name and address of the manufacturer or his authorised representative:
Kingfisher International Products B.V.,
Rapenburgerstraat 175E,
1011 VM Amsterdam,
The Netherlands

This declaration of conformity is issued under the sole responsibility of the manufacturer.

Object of the declaration

Product Model EAN
Cordless Glue Gun TTB958GLG
MCB959GLG 5063022074249

5059340701561

The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:

2014/30/EU as amended Directive Electromagnetic compatibility
2011/65/EU as amended Directive Restriction of the use of certain hazardous

substances in electrical and electronic equipment

2014/35/EU Directive Electrical Safety: Low-voltage electrical equipment

References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared:

Cordless Glue Gun TTB958GLG MCB959GLG
Charger TTB994CHR MCB995CHR

EN60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019 +A14:2019+A15:2021
EN 60335-2-45: 2002+A1:2008+A2:2012
EN 62233:2008
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 61000-3-2:2019+A1:2021
EN IEC 61000-3-3:2013+A1:2019+A2:2021| EN60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019 +A14:2019+A15:2021
EN 62233:2008
EN 60335-2-29:2021+A1:2021
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019+A2:2021
---|---

Authorised signatory and technical file holder

Kingfisher International Products B.V.,
Rapenburgerstraat 175E,
1011 VM Amsterdam,
The Netherlands

David Awe
Group Quality Director

(UK) DECLARATION OF CONFORMITY

Product

  • 3.6V Cordless Glue Gun
  • TTB958GLG
  • Serial number range 000001 to 999999

Name and address of the manufacturer or his authorised representative:

Kingfisher International Products Limited
1 Paddington Square
London
W2 1GG
United Kingdom

This declaration of conformity is issued under the sole responsibility of the manufacturer.
Object of the declaration

Product Model EAN
3.6V Cordless Glue Gun TTB958GLG 5063022074249

The object of the declaration described above is in conformity with the relevant legislation:
Electrical Equipment (Safety) Regulation 2016 as amended
Electromagnetic Compatibility Regulations 2016 as amended
The Restriction of the use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 as amended

References to the relevant designated standards used or references to the other technical specifications in relation to which conformity is declared:

Cordless Glue Gun TTB958GLG
BS EN60335-1:2012+A11:2014+A13:2017+A1:201
9+A2:2019 +A14:2019+A15:2021
BS EN 60335-2-45: 2002+A1:2008+A2:2012
BS EN 62233:2008
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 61000-3-2:2019+A1:2021
EN IEC 61000-3-3:2013+A1:2019+A2:2021| Charger TTB994CHR
EN60335-1:2012+A11:2014+A13:2017+A1:2019
+A2:2019 +A14:2019+A15:2021
EN 62233:2008
EN 60335-2-29:2021+A1:2021
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019+A2:2021
---|---

Authorised signatory and technical file holder:
Kingfisher International Products Limited
1 Paddington Square
London
W2 1GG
United Kingdom

David Awe
Group Quality Director
On 15/05/2023

Manufacturer

UK Manufacturer:
Kingfisher International Products Limited
1 Paddington Square, London, W2 1GG
United Kingdom
www.kingfisher.com/products

EU Manufacturer:
Kingfisher International Products B.V.
Rapenburgerstraat 175E
1011 VM Amsterdam
The Netherlands
www.kingfisher.com/products

www.diy.com
To view instruction manuals online, visit
www.kingfisher.com/productsTITAN
logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals