Titan TI-3D Luna Massage Chair Instruction Manual

TI-3D Luna MASSAGE CHAIR
OPERATION INSTRUCTIONS

TI-3D Luna Massage Chair

Thank you for purchasing this product. Please read this manual instruction carefully in order to know how to use this product correctly before operation. Please pay more attention to some important safety warning and keep this manual book properly for future use.
Note: Our Company reserves the right to revise the design and description of this product without any further notice. Please refer to the actual color of this product.

1. Important Safety Warnings
   • Do not allow children to touch any movable part of this product.
   • Use the well-grounded power supply unit suitable for this product.
   • Pull out the plug after use or before cleaning to avoid any physical injury or damage to the product.
   • Operate this product as instructed in this manual.
   • Do not use any parts or accessories which are not recommended.
   • Do not use this product outdoors.
   • Please read the Operation Instructions carefully before operation.
   • Never use this product for any other purpose not listed herein.
   • 20 minutes of usage each time is recommended.
   • Do not use this product if the leather is broken or damaged.
   • Do not use this product if the cover or leather is broken or damaged.
   • Do not use this product if the radiator hole is covered or blocked.
   • Do not drop anything into this product.
   • Never fall asleep while using this product.
   • Do not use this product if you are drunk or feel unwell.
   • Do not use this product within one hour after a meal.
   • Do not use this product with excessive force to avoid any injury.
   • Do not carry any fragile, explosive, or combustible material in your pocket, such as a mobile phone and lighter when using the massage chair.

2. Operating Environment
   • Do not use this product in a very moist environment such as the bathroom.
   • Stop using this product immediately when the ambient temperature changes sharply.
   • Do not use this product in any heavily-dusty or caustic environment.
   • Do not use this product in a small space or a place without good ventilation.
   • The normal room temperature ranges from 0 °C to 35 °C.
   • Do not use this product in an excessively humid room such as a bathroom. Use it at a relative humidity between 20% and 80%.
   • Do not use this product outdoors.
   • Avoid direct sunlight.
   • Keep this product away from any heat source such as a stove and air outlet of an air conditioner.
   • Do not use this product during thunder or lightning weather.
   • Do not use this product in dusty places.

3. The following populations should not use this product:
   • Patients with osteoporosis.
   • Patients with heart disease or wearing electronic medical devices such as a pacemaker.
   • People who have a fever.
   • Pregnant women or women on their menstrual period.
   • Patients who are injured or have a skin disease.
   • When unsupervised, any children are under the age of 14 and those unconscious are not allowed to use this product.
   • People who are told by their physicians to have rest or who feel unwell.
   • People whose bodies are wet are forbidden to use this product.
   • This product has a hot surface. Persons insensitive to heat must pay attention when using this product.

4. Safety Precautions
   • Check whether voltage is consistent with the specification of this product.
   • Never insert or pull out the plug with a wet hand.
   • Do not let water flow into this product to avoid electric shock or cause damage to this product.
   • Do not pull the power cord when plugging or unplugging it. Rough handling is forbidden.
   • Do not damage the wire or modify the circuit of this product.
   • Do not clean live parts of this product with a wet cloth such as a power switch and plug.
   • Be away from this product in case of power failure to avoid any injury if power is restored suddenly.
   • Stop using this product at once while it works abnormal, and consult your local supplier.
   • Stop using this product if you feel unwell, and consult your health care practitioner.
   • This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of this product by the personnel responsible for their safety. Children should be supervised to ensure that they do not play with this product.
   • If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified staff in order to avoid hazards.

5. Product Service and Maintenance
   • This product should be maintained by the service center designated by the manufacturer only. No user should disassemble or maintain it without permission.
   • Do not forget to turn off the main power switch after usage.
   • Do not use this product if the power socket becomes loose.
   • If this product will be left unused for a long period of time, it is necessary to roll up the power cord of this product and store this product in a dry and dust-free environment.
   • Do not store this product at a high temperature or near open flame. Avoid prolonged exposure to direct sunshine.
   • Please clean this product with dry cloth. Never use thinner, benzene or alcohol.
   • The mechanical components of this product are specially designed and manufactured, so no special maintenance is needed.
   • Do not use a sharp object to stab at this product.
   • Do not roll or pull this product on any uneven ground. Instead, it should be lifted before moving.
   • Please use this product intermittently. Do not keep it working continuously for a long period of time.

6. Solutions to Ordinary Malfunctions
   • If the motor sounds during operation of this product, this is the normal operation sound.
   • If the controller cannot work normally, check whether the plug and the power socket are connected reliably, and whether the power switch is turned on.
   • If the rated working time is over, this product will automatically activate the power-off button; If this product keeps operating for a long period of time, the temperature protector will stop this product automatically. The product can be used again after half an hour.

7. Storage Conditions
   • Storage room temperature: -5 °C to 35 °C.
   • Relative humidity (RH) between 20% and 80%; free of corrosive gases, and a well-ventilated room.

Safety Warnings

Warning
When the legrest of the massage chair is lifted, nobody should apply pressure on the legrest to prevent the massage chair from falling forward which will damage this product or result in personal injuries.
Warning
Before sitting on the massage chair, make sure that the massage chair manipulator does not stay in the seat cushion position to avoid discomfort to the buttocks during the body pressing down and any damage to the massage chair manipulator.
Warning
Do not remove or pull out the remote controller cable or the power cord in the standby or power-on state to avoid any damage to this product or accidental electric shock of a body part. You are advised to unplug the remote controller cable and the power cord and put them away after you use the massage chair.
Warning
When the zero-gravity lying function is enabled, be sure to check whether there is any child or pet staying or playing under the bottom of the legrest and backrest, in order to avoid any damage to this product or physical injury. ** Warning
Before using the massage chair, remove any hard objects in your pocket(s) or any jewelry carried with you (e.g. key, watch, other similar portable hard objects) to avoid any damage to this product or physical injury during massage.
Warning
Do not unplug the power cord, or directly turn off the power switch on the back of the massage chair during massage, in order to avoid any damage to this product or physical injury.
Warning
Please do not fall asleep on the massage chair while using to avoid personal injury caused by unconscious use.
** Warning
The massage chair should not be used by more than two people at the same time to avoid product failure or personal injury. In addition, do not let children play on the massage chair or climb onto the lower leg, seat cushion, foot, backrest or armrest. Otherwise, accidents or injuries may be caused. Children’s climbing, stepping on and other high-risk movements are strictly forbidden, otherwise the product may tip over and fall down. This is also to avoid product damage or personal injury.
Rotate the armrests of the massage chair upward (rotate the upper parts of the armrests upward). During or after the massage, do not put your hands (such as the hands of playing children), hard objects, keys, watches, clothes and other personal belongings in the gaps of the armrests at the original positions when you rotate the armrests back into position. Besides, after a massage, the armrests must be rotated back to their original positions to avoid product damage or personal injury.

Name of Components

1. Head cushion
2. 3D Bluetooth digital audio
3. Control panel (built-in voice control microphone)
4. Arm air compression assembly
5. Seat cushion
6. Leg support
7. Backrest cushion
8. Rotating armrest
9. Armrest
10. Side cover
11. Backrest cover
12. Rear cover of power box
13. Mobile wheel
14. Power cord and plug
15. Power input
16. Power switch

Function

• This product is designed with a group of Al intelligent core massage manipulators that can move up and down, stretch back and forth and are silent.
• It is designed with the function of automatic detection and micro-adjustment of shoulder position and the automatic detection function of the human body curves and massage Shiatsu points to automatically adjust the stretching back and forth of the manipulator according to the detected human body curves and massage Shiatsu points, making massage more humanized and scientific.
• It has eight automatic massage functions, i.e., fast massage, comfortable massage, easy massage, whole body massage, shoulder and neck massage, back and waist massage, traction massage and exercise recovery.
• It is provided with the selection of manual massage parts of the manipulators, including five massage scopes, i.e., fixed point, local, upper body, lower body and whole body.
• It is provided with a manual massage function: including seven massage methods such as kneading, Tapping, kneading and Tapping, Shiatsu, Knocking and 3D (3D I and 3D II)
• It is provided with a massage speed adjustment function: three levels are set for adjustment in massage methods such as kneading, Tapping, kneading and Tapping, Shiatsu, Knocking and 3D (3D I and 3D II).
• It is provided with a massage width adjustment function: three levels (wide, medium and narrow) are set for adjustment in massage methods such as Tapping, Shiatsu, Knocking and 3D II.
• It is provided with an air compression massage function: arm + palm air compression massage function and calf air compression massage function which can be adjusted in two levels.
• It is provided with the heating massage function: carbon fiber is used as a far-infrared heat source.
• It is provided with an intelligent voice control recognition function.
• The armrests with the function of upward rotation (rotate the upper parts of the armrests upward) can be adjusted to an appropriate massage position according to your own needs.
• Music playing system, with built-in 3D digital audio in the left and right upper arms. The Bluetooth function of intelligent devices can be used for wireless connection to play music.
• It is provided with the function of manually turning the calf by 180 °, which allows you to choose leg air compression according to your own needs.
• It is provided with a linkage lifting adjustment function for the calf frame and the backrest frame and an automatic lying mode adjustment function.
• The guide rail of the backrest adopts curved guide rail technology, which completely conforms to the back of the human body and makes people enjoy a massage from the head to the thigh.
• It is provided with a timing display function.
• Automatic sit-up function when the power is off and automatic manipulator re-set function.

Method of Usage

Display screen section of manual controller

1. LED display area:
   • To display massage modes, set time and other information.

2. 0n/off key:
   • Turn on/off the massage chair.

3. Air compression:
   • Turn on/off the calf air compression massage function. The air compression intensity can be adjusted in two levels.

4. Timing key:
   • Adjust the set time of massage.

5. Massage part key:
   • Massage part selection, including five massage parts, i.e., fixed point, local, upper body, lower body and whole body.

6. Down key for massage part:
   • Adjust the massage part downward.

7. Automatic key:
   • Massage switching function of automatic line cycle (refer to Page 13 of this manual for details).

8. Width key.
   • Adjust the massage ball width in three levels (wide, medium and narrow).

9. Zero-gravity key:
   • Adjust the zero-gravity angle of the massage chair and there are three modes for selection (pressing for the first time enters the first level, pressing for the second time enters the second level and pressing for the third time enters the third level).

10. Linkage sit-up key:
    • According to the desired massage angle, the backrest frame and the calf frame are adjusted for linkage sit-up at the same time to the most comfortable linkage sit-up massage posture.

11. Voice control key
    • Voice wake-up of voice control recognition function.

12. Heating function key:
    • Turn on/off the heating massage function.

13. Up key for massage part:
    • Adjust the massage part upward.

14. Massage method key:
    • Refer to Page 14 of this manual for details.

15. Speed key:
    • Adjust the speed of the massage method.

16. Linkage lying key:
    • According to the desired massage angle, the backrest frame and the calf frame are adjusted for linkage lying at the same time to the most comfortable linkage lying massage posture.

17. Turn on the power supply of this product

18. Start massage
    (1) Press the power button to start the massage and the massage chair will automatically lie.
    (2) Automatically detect the body shape to keep the fitting between the body and the massage chair. (you can press the part key to skip the automatic detection and then enter the default massage program automatically).
    (3) Make a fine adjustment of shoulder position. If the detected position deviates from the actual shoulder position, use the speed key and the width key to get to the appropriate position. (you can press the part key to skip the step).
    (4) Enter the massage status and experience the massage.
    -Utomatic massage:
    ** Function| Key| Description| Display**
    ---|---|---|---
    Automatic massage| | Fast Massage: Quickly experience all massage effects.| A1
    Comfort Massage: The most comfortable massage experience.| A2
    Relax Massage: Gentle and comfortable deep massage, which can relieve body fatigue and relax the body.| A3
    Full body Massage: Deep massage, which can revive body vitality.| A4
    Neck & shoulder Massage: Focus on the shoulder and neck.| A5
    Back & Waist Massage: Focus on the back and waist to relieve back and waist soreness.| A6
    Stretch Massage: The automatic mode is accompanied by the swing of the electric lever.| A7
    Sport Recovery: Quick recovery of body fatigue after exercising.| A8

– Manual massage****

– Massage Part adjustment****

– Air compression massage****

– Massage while heating****

will feel slightly warm massa feel in 3 minutes after the function is turned on.| Refer to indicators on the panel for
display

– Voice control****

for 3 seconds to turn on/off the voice control function.

– Zero-gravity key****

automatic lying mode. There are three modes in total which can be cyclically switched.

– Other manual functions.****

repeat the addition by 5 minutes, but 30 minutes will not be exceeded. If 30 minutes are exceeded, it will return to the lowest time value.

– Rest frame adjustment

slowly lowering the calf frame and release it to stop the rising or lowering. If you get up to the top, rising stops.
Lying key| | Press and hold this key to slowly lower the backrest frame while slowly rising the calf frame and release it to stop the lowering or rising. If you get to the lowest, lowing stops.
3. Voice Control Mode
– When the massage chair is open or in standby mode, say “hi, Alice” or press the voice control wake-up button on the left armrest to wake up the voice control function.
– Long press 3 seconds to tum on or off the voice control function.
– After such function is enabled successfully, the massage chair will reply “l am here”. At this moment, once a corresponding voice control entry to be implemented is given within six seconds, the corresponding voice control function can be performed after a reply is received from the massage chair; if no correct voice control entry is given within six seconds, the voice control function automatically will be off automatically and needs to be enabled again.
– Note: When the voice control function is enabled, please speak Mandarin. The speaking speed cannot be too fast. The speech instruction should be issued according to the voice control entry.
Voice Control Entry
Entry: “Hi Alice” or “Hey Alice”. Answer: I am here.No.| Voice control entry| Answer entry
---|---|---
1| Massage on| Answer: Ok, massage on
2| Massage close| Answer: Ok, massage close
3| Comfort massage| Answer: Ok, comfort massage
4| Relax massage| Answer: Ok, relax massage
5| Full body massage| Answer: Ok, full body massage
6| Neck and shoulder massage| Answer: Ok, neck and shoulder massage
7| Back and waist massage| Answer: Ok, back and waist massage
8| Stretch massage| Answer: Ok, stretch massage
9| Fixed massage| Answer: ok fixed massage
10| Change the other mode| Answer: Ok, change the other mode
1| Go lttle down| Answer: Ok, go litlle down
12| Golittle up| Answer: Ok, go little up
13| Open the air pressure| Answer: OK, Open the air pressure
14| Close the air pressure| Answer: OK,, Close the air pressure
15| Up the seat position| Answer: Ok, Up the seat position
16| Down the seat position| Answer: Ok, Down the seat position
17| Stop adjustment| Answer: Ok, stop adjustment
4. Operation Instructions for Bluetooth Speaker Play
1. Enter the smart device main menu. Open “Settings” and select the “Bluetooth” option. Open “Bluetooth”, and Bluetooth will automatically “Search for a New Bluetooth Device”.
2. The smart device will search for the corresponding Bluetooth model (e.g. IMCM- XXXX). Click the “Match” button. If you are asked whether to match with the device, you just select “Match” to complete matching.
3. Turn on “Music Player” in the smart device and select the song to play.

5. Turn off the power to end the massage
   1. During the massage process, press the red power on/off key to immediately turn off all massage functions. Both the manipulator and the automatic sit-up will reset.
   2. When the set massage time is over (set to be 20 min at the time of power-on), all massage functions will be automatically turned off and the re- set position of the manipulator will not be changed.
   3. After re-set, cut off the power supply of the whole machine.

6. Turning method of calf
   1. When using the calf tuming function, first turn the calf until it intersects with the crossbeam tube of the calf (stuck and unable to rotate) (as shown in Fig. 1).
   2.Then tum the calf down again while pulling it forward about 5cm (as shown in Fig 2).
   Reverse the step to tum the calf back.

7. Lifting and moving method
   Cooperation between two persons is required in lifting and moving the massage chair. They should lit the chair simultaneously in front and behind it, with the groove of the back cover of the massage chair as the point of force application from the back and the cross beam tube of the calf of the massage chair as the point of force application from the front respectively. Do not lift and move the chair by holding the armrests directly.

8. Floor Protection
   -The prolonged heavy pressure on the massage chair may cause scratches on the floor. Thus, put a carpet or cushion on the floor where the massage chair is placed to avoid this damage. Note: Do not move the massage chair with its wheels on the rough ground or in a narrow space. At least two persons are required tolift t. During lifting, take the legrest sealing plate and backrest cover grooves as the acting points. (Do not lift the armrest directly.)

9. Instruction for movement
   -Make sure that all the wires are pulled away from the massage chair surface; then press the backrest down to a certain angle (with the center of gravity resting on the wheels), you can push the massage chair forward with hands, move it to a suitable position and gently restore it to the normal angle. ( Note: During movement, you must tum off the power button first and then unplug the power cord and the remote controller connection wire.) Warning: The rear moving wheels of the massage chair are only suitable for short- distance and slow movement. For long-distance transportation, please use other auxiliary moving tools to move this massage chair!
   

Product Specification

Model: TI-3D Luna
Name: Massage Chair
Rated voltage: 110-120V~ 60Hz
Rated power: 65W
Rated time: 20min
Safety structure: Class 1
Material description: PVC, PA, steel parts, electric and electron components

Documents / Resources

| Titan TI-3D Luna Massage Chair [pdf] Instruction Manual
TI-3D_Luna_Web, TI-3D Luna Massage Chair, TI-3D, Luna Massage Chair, Massage Chair, Chair
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>