V-TAC VT-6060-6-N LED Panel Instruction Manual
- August 22, 2024
- V TAC
Table of Contents
V-TAC VT-6060-6-N LED Panel
Product Usage Instructions
Introduction & Warranty:
Replaceable control gear by a professional. This product should not be
disposed of with other household wastes. Caution, risk of electric shock.
Luminaires are not suitable for covering with thermally insulating material.
Installation Instructions:
- Make a hole into the ceiling.
- Fix the panel into the ceiling.
- Wire the DC cable of the panel to the driver and then wire the AC source cable to the power supply.
- Turn on the switch, test the fixture light on.
FAQ:
-
Q: What is the recommended input power for the LED panel?
A: The recommended input power is DC 30-42V. -
Q: Can the LED panel be disposed of with other household wastes?
A: No, this product should not be disposed of with other household wastes. -
Q: What should I do in case of any query or issue with the product?
A: Please reach out to us at SUPPORT@V-TAC.EU for assistance. For more product ranges or inquiries, please contact our distributor or nearest dealers.
TECHNICAL DATA
- MODEL VT-6060
- SKU 2160246,2160256,2160286
- SHAPE Square
- WATTS 40W
- LUMENS 4950LM
- BEAM ANGLE 120°
- CRI ≥80
- DF ≥0.9
- BODY TYPE Aluminum + PMMA + PP
- ON/OFF CYCLE >15,000 Times
- LONG LIFE 25,000 Hours
- OPERATION TEMPERATURE -20°C to +40°C
- PROTECTION RATING IP20
- INPUT POWER DC: 30~42V
- DIMENSION 595x595x13mm
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
SAFETY WARNING
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Installation should only be done by a certified electrician.
- For Indoor use only:
- This marking indicates that this product should not be disposed of with other household wastes.
- Caution, risk of electric shock.
- Luminaires not suitable for covering with thermally insulating material.
Note: The panel works on DC 30-42V, please connect correctly with the conductor before connecting the conductor to the power supply main.
INSTALLATION DIAGRAM
- Make a hole into the ceiling.
- Fix the panel into the ceiling.
- Wire the DC cable of the panel to the driver and then wire the AC source cable to the power supply.
- Turn on the switch, test the fixture light on.
DISMANTLING INSTRUCTIONS
For Market surveillance team only
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>