PHILCO PLWDSI 86 KING Wash and Dryer Machine Owner’s Manual

PHILCO PLWDSI 86 KING Wash and Dryer Machine

FAQs

• Q: Can I wash my shoes in the machine?
  • A: No, it is not recommended to wash shoes in this machine as it could damage the appliance.
• Q: Can I use any detergent for washing clothes?
  • A: No, use only detergents intended for automatic drum washing machines to avoid damage.
• Q: What should I do if the power cord is damaged?
  • A: Contact the manufacturer, their service agent, or a qualified person for replacement.

SAFETY INSTRUCTIONS

• THIS APPLIANCE CAN BE USED BY CHILDREN AGED 8 YEARS AND ABOVE AND BY PERSONS WITH REDUCED PHYSICAL, SENSORY, OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTIONS CONCERNING THE USE OF THE APPLIANCE IN A SAFE WAY AND IF THEY UNDERSTAND THE HAZARDS INVOLVED.
• CHILDREN MUST NOT PLAY WITH THE APPLIANCE.
• CHILDREN YOUNGER THAN 3 YEARS OF AGE SHOULD BE PREVENTED FROM ACCESSING UNLESS THEY ARE UNDER PERMANENT SUPERVISION.
• CLEANING AND USER MAINTENANCE CANNOT BE PERFORMED BY CHILDREN WITHOUT SUPERVISION.
• IF THE SUPPLY CABLE GETS DAMAGED, HAVE IT REPLACED BY A SPECIALIZED SERVICE CENTRE TO AVOID DANGEROUS SITUATIONS. IT IS PROHIBITED TO USE AN APPLIANCE WITH THE SUPPLY CABLE DAMAGED.
• THIS APPLIANCE IS INTENDED TO BE USED ONLY IN HOUSEHOLDS AND NOT IN SIMILAR PREMISES, SUCH AS:
• KITCHENETTES IN SHOPS, OFFICES, AND OTHER WORKPLACES;
• AGRICULTURAL FACILITIES;
• HOTELS, MOTELS, AND OTHER ACCOMMODATION FACILITIES WHERE APPLIANCES ARE USED BY GUESTS;
• BED AND BREAKFAST FACILITIES;
• COMMON-USE FACILITIES IN BLOCKS OF FLATS.
• THE APPLIANCE MUST NOT BE USED WITH MORE DRY LAUNDRY THAN STATED IN THE MACHINE SPECIFICATIONS.
• THE DRYER MUST NOT BE USED IF INDUSTRIAL CHEMICALS ARE INVOLVED IN CLEANING.
• MAKE SURE THAT FLUFF DOES NOT ACCUMULATE AROUND THE MACHINE.
• DO NOT DRY UNWASHED PIECES OF CLOTHING IN THE DRUM DRYER.
• PIECES OF CLOTHING STAINED WITH SUCH SUBSTANCES AS EDIBLE OIL, ACETONE, ALCOHOL, PETROL, PARAFFIN, STAIN REMOVERS, TURPENTINE, WAXES, OR WAX REMOVERS SHOULD BE WASHED IN HOT WATER WITH AN EXTRA DOSE OF DETERGENT BEFORE THEY ARE DRIED IN A DRUM DRYER.
• PIECES OF CLOTHING SUCH AS FOAM RUBBER (FOAM LATEX), BATHING CAPS, WATERPROOF TEXTILES, RUBBER-COATED ELEMENTS AND CLOTHING OR PILLOWS FILLED WITH FOAM RUBBER SHOULD NOT BE DRIED IN A DRUM DRYER.
• SOFTENERS AND SIMILAR PRODUCTS SHOULD BE USED ACCORDING TO THEIR INSTRUCTIONS FOR USE.
• THE FINAL PHASE OF THE DRUM DRYER CYCLE WILL BE PERFORMED WITHOUT HEATING (COOLING CYCLE) TO ENSURE THAT THE CLOTHING PIECES WILL ACHIEVE SUCH TEMPERATURE THAT WILL PREVENT THEM FROM GETTING DAMAGED.
• REMOVE ALL ITEMS SUCH AS LIGHTERS AND MATCHES FROM POCKETS.
• NEVER TURN THE DRUM DRYER OFF BEFORE THE DRYING CYCLE IS COMPLETED UNLESS ALL ITEMS ARE REMOVED AND SPREAD OUT QUICKLY AFTERWARD SO THAT THE HEAT CAN DISSIPATE.
• THE APPLIANCE MUST NOT BE INSTALLED BEHIND A LOCKABLE DOOR, SLIDING DOOR, OR DOOR WITH HINGES ON THE OPPOSITE SIDE OF THE DRUM DRYER IF SUCH INSTALLATION WOULD PREVENT THE DRUM DRYER DOOR FROM OPENING FULLY.
• THE APPLIANCE MUST NOT BE POWERED FROM AN EXTERNAL SWITCHING DEVICE SUCH AS A TIMER SWITCH OR BE CONNECTED TO A CIRCUIT THAT IS REGULARLY SWITCHED ON AND OFF.
• THIS APPLIANCE IS INTENDED FOR WASHING AND DRYING FABRICS FOR WHICH THE MANUFACTURER HAS RECOMMENDED SUCH TREATMENT.
• ALWAYS USE PROGRAMMES ACCORDING TO THE FABRIC TYPE.
• THE WASHING MACHINE COULD GET DAMAGED WHEN WASHING OR DRYING SHOES.
• DO NOT USE TO WASH CARPETS.
• USE ONLY DETERGENTS THAT ARE INTENDED FOR WASHING OR DRYING CLOTHES IN AN AUTOMATIC DRUM WASHING MACHINE.
• IF THE SUPPLY CORD GETS DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER, ITS SERVICE AGENT OR A SIMILARLY QUALIFIED PERSON.
• THE APPLIANCE SHOULD BE CONNECTED TO THE WATER SUPPLY AND DRAIN USING NEW HOSES, NOT USING HOSES THAT HAVE ALREADY BEEN USED.
• ALWAYS DISCONNECT THE APPLIANCE FROM THE MAINS BEFORE PERFORMING ANY MAINTENANCE.
• THE POWER CORD PLUG MUST BE CONNECTED TO A GROUNDED THREE-POLE ELECTRIC OUTLET.
• NEVER USE A POWER OUTLET WITH A RATED VOLTAGE THAT IS DIFFERENT FROM THE APPLIANCE’S VOLTAGE.
• DO NOT USE EXTENSION CORD TO CONNECT THE MACHINE TO THE POWER OUTLET.
• THE APPLIANCE, THE POWER CORD, OR THE ELECTRIC OUTLET MUST NOT LIE IN, TOUGH, OR BE SUBMERGED IN WATER OR ANY OTHER LIQUID TO AVOID ELECTRICAL HAZARDS.
• THE APPLIANCE MUST NOT STAND ON THE POWER CORD.
• THE POWER CORD MUST NOT BE EXCESSIVELY OR DANGEROUSLY BENT OR COMPRESSED DURING INSTALLATION OR OPERATION.
• THE CONTROLS AND DOOR OF THE APPLIANCE ARE NOT TO BE PLAYED WITH.
• THE GLASS DOOR OF THE APPLIANCE CAN GET HOT DURING OPERATION.
• DO NOT DRY UNWASHED PIECES OF CLOTHING IN THE DRYER.

APPLIANCE INSTALLATION

• THIS APPLIANCE IS INTENDED FOR INTERIOR USE ONLY.
• THIS APPLIANCE IS INTENDED TO BE BUILT-IN.
• THE ELECTRIC OUTLET THAT THE POWER CORD IS CONNECTED TO MUST BE EASILY ACCESSIBLE AFTER THE APPLIANCE HAS BEEN INSTALLED.
• REMOVE ALL PACKAGING MATERIALS AND SAFETY TRANSPORT BOLTS BEFORE USING THE APPLIANCE. OTHERWISE, THE APPLIANCE OR ITS SURROUNDINGS MIGHT GET SERIOUSLY DAMAGED.
• THE APPLIANCE, THE POWER CORD, OR THE ELECTRIC OUTLET MUST NOT LIE IN, TOUGH, OR BE SUBMERGED IN WATER OR ANY OTHER LIQUID TO AVOID ELECTRICAL HAZARDS.
• THE PACKAGING MATERIALS MUST BE DISPOSED OF IN A PROPER MANNER.
• DO NOT LIFT OR HANDLE THE APPLIANCE WHEN HOLDING ITS DOOR, CONTROLS, UPPER BOARD, HOSES OR POWER CORD.
• THE APPLIANCE MUST BE INSTALLED ONTO A FIRM AND EVEN SURFACE.
• AFTER YOU PLACE THE APPLIANCE, MAKE SURE IT IS LEVEL IN ALL DIRECTIONS USING A SPIRIT LEVEL.
• THE APPLIANCE MUST NOT BE INSTALLED BEHIND A LOCKABLE DOOR, SLIDING DOOR, OR DOOR WITH HINGES ON THE OPPOSITE SIDE OF THE DRUM DRYER IF SUCH INSTALLATION WOULD PREVENT THE DRUM DRYER DOOR FROM OPENING FULLY.
• THE APPLIANCE MUST NOT BE POWERED FROM AN EXTERNAL SWITCHING DEVICE SUCH AS A TIMER SWITCH OR BE CONNECTED TO A CIRCUIT THAT IS REGULARLY SWITCHED ON AND OFF.
• PLEASE READ THOSE SAFETY PRECAUTIONS CAREFULLY AND STORE THEM FOR FUTURE REFERENCE.
• For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

Explanation of the symbols:

• Warning! This combination of symbol and signal words indicates a potentially dangerous situation that may result in death or serious injuries unless it’s avoided.
• Caution! This combination of symbol and signal words indicates a potentially dangerous situation that may result in slight or minor injuries or damage to property and the environment.
• Note! This combination of symbol and signal words indicates a potentially dangerous situation that may result in slight or minor injuries.

Packaging/Old appliance

• This marking indicates that this product should not be disposed of with other household wastes throughout the EU.
• To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
• To return your used device, please use the collection systems or contact the retailer where the product was purchased. They return and can take this product for environmentally safe recycling.

INSTALLATION

Product Description

Note! The product line chart is for reference only, please refer to the real product as standard.

Accessories

Installation area Warning!

• Stability is important to prevent the product from wandering!
• Make sure that the product does not stand on the power cord.

Before installing the machine, the location characterized as follows shall be selected:

1. Rigid, dry, and level surface
2. Avoid direct sunlight
3. Sufficient ventilation
4. Room temperature is above 0 °C
5. Keep far away from the heat resources such as coal or gas.

Unpacking the washing machine

Warning!

• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
• There is a risk of suffocation! Keep all packaging well away from children.

1. Remove the cardboard box and styrofoam packing.
2. Lift the washer and dryer and remove the base packing. Make sure the small triangle foam is removed with the bottom one together. If not, lay the unit down with a side surface, then remove the small foam from the unit bottom manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.

Remove transport bolts Warning!

• You must remove the transport bolts from the backside before using the product.
• You’ll need the transport bolts again if you move the product, so make sure you keep them in a safe place.

Please take the following steps to remove the bolts:

1. Loosen 4 bolts with a spanner and then remove them.
2. Stop the holes with transport hole plugs.
3. Keep the transport bolts properly for future use.

Levelling the washer and dryer

Warning! The lock nuts on all four feet must be screwed tightly against the housing.

1. Check if the legs are closely attached to the cabinet. If not, please turn them to their original positions and tighten the nuts.
2. Loosen the lock nut and turn the feet until it close contact with the floor.
3. Adjust the legs and lock them with a spanner, making sure the machine is steady.

Connect Water Supply Hose

Warning!

• To prevent leakage or water damage, follow the instructions in this chapter!
• Do not kink, crush, modify, or sever water inlet hose.
• For the model-equipped hot valve, connect it to a hot water tap with a hot water supply hose. Energy consumption will decrease automatically for some programs.

Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.

1. Connection between ordinary tap and inlet hose.
2. Connection between screw tap and inlet hose.
   • Connect the other end of the inlet pipe to the inlet valve at the backside of the product and fasten the pipe tightly clockwise.

Drain Hose Warning!

• Do not kink or protract the drain hose.
• Position the drain hose properly, otherwise damage might result from water leakage.

There are two ways to place the end of drain hose:

1. Put it into the water trough.
2. Connect it to the branch drain pipe of the trough.
   • Note! If the machine has drain hose support, please install it like the following.

OPERATIONS

Quick Start

• Caution!
  • Before washing, please make sure it’s installed properly.
  • Before washing for the first time, the washing machine shall be operated in one round of the whole procedure without clothes as follows.

Before Washing

Note! After prewash is selected in appliances equipped with this function, detergent must be added to the “I” drawer.

Washing

Note!

• If default is selected, step 3 can be skipped.
• The function button line chart is for reference only, please refer to the real product as standard.

After Washing

• Buzzer beep or “End” on display.

Before Each Washing

• The working condition of the washer should be (0-40) °C. If used under 0 °C, the inlet valve and draining system may be damaged.
• If the machine is placed under a condition of 0 °C or less, then it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen before use.
• Please check the labels and the explanation of using detergent before wash. Use non-foaming or lessfoaming detergent suitable for machine washing properly.

Warning!

• When washing a single piece of clothing the drum might be insufficiently balanced which might trigger an awarning signal and the washing machine might stop working.
• In this case, add other pieces of clothing that can be washed together to make the load in the drum sufficient and to ensure its correct balance.

Detergent Dispenser

Caution! Detergent only needs to be added in „case I “after selecting pre-washing for machines with this function.

Note!

• If an extra thick detergent, additive, or fabric conditioner is used, we suggest that you dilute it using a small amount of water before pouring it into the detergent or fabric conditioner drawer.
• This will prevent the drawer from overflowing during water pumping.
• Choose a suitable detergent type for different washing temperatures to achieve the best washing performance with lower water and energy consumption.

Control Panel

PLWDSI 86 KING, PLWD 107 B KING

Note! The chart is for reference only, Please refer to the real product as standard.

1. On/Off
   • The product is switched on or off.
2. Start/Pause
   • Press the button to start or pause the washing cycle.
3. Option
   • This allows you to select an additional function and will light when selected.
4. Programmes
   • Available according to the laundry type.
5. Display
   • The display shows the settings, estimated time remaining, options, and status messages for your washer.
   • The display will remain on through the cycle.
   • A.
   • Wash Time 1:25
   • Delay Time 2h
   • Speed 400
   • Error E30
   • End End
   • Temp. 30
   • B Pre Wash
   • C Reload
   • D Door Lock
   • E Child Lock
   • F Extra Rinse
   • G Speed Wash
   • H Delay
   • I SpaCare
   • J Pre Wash-Wash-Rinse-Spin

Option Delay Set the Delay function:

1. Select a program.
2. Press the Delay button to choose the time (the delaying time is 0-24 H/3H-6H-9H).
3. Press [Start/Pause] to commence the delay operation.
   • Cancel the Delay function: Press the [Delay] button until the display is 0H. It should be pressed before starting the program. If the program already started, should switch off the program to reset a new one.

Drying
The drying time will increase or decrease after you select it. Before starting the drying program, the revolution speed must be switched off on the device – The revolution speed must be set to “0”.

Caution! If there is any break in the power supply while the machine is operating, a special memory stores the selected program, and when the power is restarted, the program will continue.

Pre Wash

• The Prewash function can get an extra wash before the main wash, it is suitable for washing the dust that rises to the surface of the clothes; You need to put detergent into Case (I) when selecting it.

Extra Rinse

• The laundry will undergo an extra rinse once after you select it.

Speed Wash

• The function can decrease the washing time.

My Cycle

• To memory the frequently used program.
• After choosing the program and setting the options, press [Temp.] 3 sec. before starting to wash. The default setting course is Cotton.

Reload

• This operation can be performed during washing.
• The door cannot be opened by force that would be dangerous.

To add laundry during a program, please do the following:

1. Press the [Start/Pause] button for 3 seconds.
2. Wait until the drum has stopped turning.
3. The door lock will unlock.
4. After you add the laundry, close the door and press the [Start/Pause] button.

SpaCare

• SpaCare function can be selected by choosing “Cotton”, “Mix“Bed Linen” and “Baby Care”.
• The customers can see the steam in the drum when operating the SpaCare function. The SpaCarecannot be used simultaneously With Pre Wash and Speed Wash.

Caution! Don‘t use the Reload function when the water level is over the edge of the inner tub or the temperature is higher.

Other Functions

• Temp.
  • Press the button to regulate the temperature (Cold, 20 °C, 30 °C, 40 °C, 60 °C, 90 °C).
• Speed
  • Press the button to change the speed.
  • 1400: 0-400-600-800-1000-1200-1400
  • 1500: 0-400-600-800-1000-1200-1400-1500

PLWDSI 86 KING, PLWD 107 B KING

Program| Default Speed (rpm)| | Program| Default Speed (rpm)
---|---|---|---|---
| 1400| 1500| | 1400| 1500
Cotton| 1400| 1500| Spin Only| 1000| 1000
Mix| 800| 800| Rinse&Spin| 1000| 1000
Wash and Dry| 1400| 1500| Wool| 600| 600
Dry Only| 1400| 1500| ECO 40-60| 1400| 1500
20 °C| 1000| 1000| lntensive| 800| 800
Baby Care| 800| 800| Quick 15’/1 h WD| 800| 800
Drum Clean| –| –|

Child Lock

• To avoid misoperation by children.

Caution!

When the child lock is activated and the program starts, the child lock indicator will switch on, and the CL and remaining time on the display are alternately displayed in 0.5s. Pressing the other buttons will make the child lock indicator flash for 3s. When the program finishes, CL and END alternate for 10s in 0.5s, then the child lock lights flash for 3s.

• Only pressing and holding the two buttons can release the child lock, even power off, switch off, and program end.
• The „Child Lock“ will lock all buttons except the Power button and Child Lock button.
• Please release the child lock before selecting the program and starting washing.

Mute the buzzer

• To act the buzzer function, press the button again for 3 seconds. The setting will be kept until the next reset.
• Caution! After Muting the buzzer function, the sounds will not be activated anymore.

Programmes

Programs are available according to the laundry type. Detailed info about your programs depends on the control panel. Please, check your model at the chapter control panel.

Programmes

Cotton| Hard-wearing textiles, heat-resistant textiles made of cotton or linen.
Synthetic| Wash synthetic articles, for example: shirts, coats, and blending. While washing the knitting textiles, the detergent quantity shall be reduced due to its loose string construction and easily forming bubbles.
Baby Care| Washing the baby’s clothes, can make the baby‘s clothes cleaner and make the rinse performance better to protect the baby’s skin.
Mix| Mixed load consisting of textiles made of cotton and synthetics.
Bed Linen| This program is specially designed for washing duvet coats.
20 °C| 20 °C default, can choose cold water.
ECO 40-60| Default 40 °C, not selectable, suitable for laundry washing at about 40 °C – 60 °C.
Quick 15’ Quick 15’ 1h W/D| Extra short program approx, suitable for lightly soiled washing as a small amount of laundry. For small synthetic clothes or shirts, the load limitation is 1 kg (about 4 shirts).
Wool| Hand or machine-washable wool or rich wool textiles. Especially gentle wash programs to prevent shrinkage, and longer program pauses (textiles rest in a wash liquor).
Spin Only| Extra spin with selectable spin speed.
Rinse&Spin| Extra rinse with spin.
Intensive| To increase the washing effects, washing time is increased.
Drum Clean| Specially set in this machine to clean the drum and tube. It applies 90 °C high-temperature sterilization to make the clothes washing more green. When this program is performed, the clothes or other washing cannot be added. When a proper amount of chlorine bleaching agent is put in, the barrel cleaning effect will be better. The customer can use this program regularly according to their need.
Dry Only| Select it to dry clothes, the temperature is different. The drying time is according to the load. Before starting the drying program, the revolution speed must be switched off on the device – The revolution speed must be set to “0”
Wash and dry| The standard energy program.

Washing Programmes Table

PLWDSI 86 KING, PLWD 107 B KING

• Concerning to (EU) No.1061/2010,
  • The EU energy efficiency class is: A
  • Energy test program: lntensive; Speed:The highest speed;Tem.: 60 °C;
  • Other as the default.
  • Half load for 8.0/10.0Kg machine: 4.0/5.0Kg.
• Concerning to (EU) 2019/2023,
  • The EU energy efficiency class is: E/D
  • Energy test program: ECO 40-60/Wash & Dry.
  • ECO 40-60: as the default
  • Half load for 8.0/10.0Kg machine: 4.0/5.0Kg.
  • Quarter load for 8.0/10.0Kg machine:2.0/2.SKg.
  • Wash and dry: dry level: (Extra Dry), Other as the default.
  • Half load for 6.0/7.0Kg machine: 3.0/3.5Kg.

Note! The parameters in this table are only for the user’s reference. The actual parameters may be different from the parameters in above mentioned table.

MAINTENANCE

Cleaning And Care

Warning!

• Before your maintenance starts, please unplug the machine and close the tap.

Cleaning The Cabinet

• Proper maintenance of the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary.
• If there is any water overflow, use a wet cloth to wipe it off immediately. No sharp items are allowed.

Note!

• Formic acid and its diluted solvents or equivalent are forbidden, such as alcohol, solvents chemical products, etc.

Cleaning The Drum

• The rust left inside the drum by the metal articles shall be removed immediately with chlorine-free detergents.
• Never use steel wool.

Note!

• Don’t put laundry in the washing machine during the drum cleaning.

Cleaning The Door Seal And Glass

• Wipe the glass and seal after each wash to remove lint and stains. If lint builds up it can cause leaks.
• Remove any coins, buttons, and other objects from the seal after each wash.

Cleaning The Inlet Filter

Note! The inlet filter must be cleaned if there is less water.
Washing the filter in the tap

1. Close the tap.
2. Remove the water supply hose from the tap.
3. Clean the filter.
4. Reconnect the water supply hose.

Washing the filter in the washing machine:

1. Screw off the inlet pipe from the backside of the machine.
2. Pull out the filter with long nose pliers and reinstall it back after being washed.
3. Use the brush to clean the filter.
4. Reconnect the inlet pipe.

Note!

• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, and turn on the tap.

Clean The Detergent Dispenser

1. Press down the arrow location on the softener cover inside the dispenser drawer.
2. Lift the clip take out the softener cover and wash all grooves with water.
3. Restore the softener cover and push the drawer into position.

Note! Do not use alcohol, solvents, or chemical products to clean the machine.

Cleaning The Drain Pump Filter Warning!

• Be careful of the hot water!
• Allow the detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• A drain pump filter can filter the yarns and small foreign matter from the washing.
• Clean the filter periodically to ensure the normal operation of the washing machine.

Caution!

• Make sure that the valve cap is reinstalled properly, cap plate should be inserted and aligned to hole plates otherwise water may leak.
• When the appliance is in use and depending on the program selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty.
• When replacing the cover, ensure it is securely re-tightened.

Troubleshooting

The start of the appliance does not work or it stops during operation. First try to find a solution to the problem, If not, contact the service center.

Note! After the check, activate the appliance. If the problem occurs or the display shows other alarm codes again, contact the service.

Technical Specifications

Note!

• Program setting for testing per applicable standard En60456 for a wash.
• Program setting for testing under applicable standard En50229 for wash and dry.
• When using the test programs, wash the specified load using the maximum spin speed.
• The actual parameters will depend on how the appliance is used and may be different from the parameters in above mentioned table.
• The household washing machine is equipped with a power management system. The duration of the left-on mode time is less than 10 minutes.
• The noise emissions during washing/spinning for the standard washing cycle at full load.

Remarks:

1. The energy efficiency class is from A (highest efficiency) to D (lowest efficiency).
2. Energy consumption per year, based on 220 standard washing cycles for the standard program at 60°( and40°( at full and partial load, and the consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.
3. Water consumption per year is based on 220 standard washing cycles for the standard program at 60°C and 40°C at full and partial load. Actual water consumption will depend on how the appliance is used.
4. Spin-drying efficiency class from G (least efficient) to A (most efficient).
5. The standard 60°C program and the standard 40°C program are the standard washing programs.
   • These programs are suitable for cleaning normally soiled cotton laundry and they are the most efficient programs in terms of combined energy and water consumption for washing that type of cotton laundry.
   • The actual water temperature may differ from the declared cycle temperature.
   • Please choose the suitable type of detergent for the various washing temperatures to get the best washing performance with less water and energy consumption.

PRODUCT INFORMATION SHEET

A (highest efficiency) to G (lowest efficiency)

A (highest efficiency) to G (lowest efficiency)

TECHNICAL INFORMATION

• Technical information can be found on the type plate on the inside of the appliance and the energy label.
• The QR code, on the supplied energy label, contains a link to register the appliance in the EU Eprel database.
• Keep the energy label, and the instructions for use, together with other documents supplied with the device.

TESTING INFORMATION

• The delivered device is under EcoDesign and EN62552. Air access requirements for proper operation of the device, the minimum distance from the wall, and the dimensions of the device are part of this manual. If you have any further questions, please contact the manufacturer.

CUSTOMER CARE AND SERVICE

• Always use original spare parts.
• The model name and serial number can be found on the rating plate. The position of the rating plate can be changed without notice.
• The original spare parts for some specific components are available for a minimum of 7 or 10 years, based on the type of component, from the placing on the market of the last unit of the model.
• When contacting our authorized service, have the model designation, serial number, and defect description available.
• To download documents, visit www.philco.cz.
• To report a defect and obtain additional service information, visit https://philco.cz/podpora-a-servis.
• Subject to change without notice.

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS

• Dispose of packaging material at a public waste disposal site.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES

• The meaning of the symbol on the product, its accessory, or packaging indicates that this product shall not be treated as household waste.
• Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste.
• Alternatively in some states of the European Union or other European states, you may return your products to your local retailer when buying an equivalent new product.
• The correct disposal of this product will help save valuable natural resources and help prevent the potential negative impact on the environment and human health, which could be caused as a result of improper liquidation of waste.
• Please ask your local authorities or the nearest waste collection center for further details. The improper disposal of this type of waste may fall subject to national regulations for fines.
• For business entities in the European Union
• If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.
• Disposal in other countries outside the European Union
• If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or your seller.
• This product meets all the basic EU regulation requirements that relate to it.
• Changes to the text, design, and technical specifications may occur without prior notice and we reserve the right to make these changes.
• The original of this user manual is in the Czech language.
• Dear customer, Thank you for buying a PHILCO brand product. So that your appliance serves you well, please read all the instructions in this user’s manual.

References

• Automatické pračky, chladničky, myčky, vestavné spotřebiče | Philco
• Práčky, chladničky, umývačky, vstavané spotrebiče | Philco
• Servis - OnLine hlášení reklamace | Philco

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>