Welov X1S Smart Air Fryer User Manual

June 3, 2024
WELOV

Welov X1S Smart Air Fryer

X1S Smart Air Fryer

Please read all theinstructions before usingand keep it for futurereference.

IMPORTANT SAFETY INSTRUCTIONS

  • Read all instructions prior to using the air fryer and its accessories.
  • To eliminate a choking hazard for young children, discard all packaging materials immediately upon unpacking.
  • This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Take inventory of all contents to ensure you have all parts needed to properly and safely operate your air fryer.
  • NEVER leave the air fryer unattended while in use.
  • NEVER use outlet below counter.
  • DO NOT let cord hang over edges of tables or counters or touch hot surfaces, including stoves and other heating air fryers.
  • Keep the appliance and its cord out of reach of children.
  • DO NOT allow the appliance to be used by children.Close supervision is necessary when used near children.
  • DO NOT use an extension cord. A short power-supply cord is used to reduce the risk of children grabbing the cord or becoming entangled and to reduce the risk of people tripping over a longer cord.
  • DO NOT place any object directly onto the heating elements and DO NOT cover any part of the air fryer with metal foil. This will cause the air fryer to overheat or cause a fire.
  • To protect against electrical shock DO NOT immerse cord, plugs, or main unit housing in water or other liquid.
  • DO NOT use the air fryer with damage to the power cord or plug. Regularly inspect the air fryer and power cord. If the air fryer malfunctions or has been damaged in any way, immediately stop use and call Customer Service.
  • DO NOT cover the air intake vents or air outlet vents while unit is operating.Doing so will prevent even cooking and may damage the unit or cause it to overheat.
  • DO NOT insert anything in the intake and ventilation slots and DO NOT obstruct them.
  • DO NOT use accessory and attachments not recommended or sold by the Designated supplier.
  • DO NOT place items on top of surface while unit is operating except for authorized recommended accessories.
  • Before placing any accessories into the air fryer ensure they are clean and dry.
  • Intended for countertop use only. DO NOT place the air fryer near the edge of a countertop. Ensure the surface is level, clean and dry,
  • This air fryer is for household use only ,DO NOT use outdoors. DO NOT use in moving vehicles or boats.
  • DO NOT use this air fryer for anything other than its intended use. Misuse may cause injury.
  • DO NOT store any materials, other than supplied accessories, in this air fryer when not in use.
  • When using this air fryer, provide adequate space above and on all sides for air circulation.
  • Afire may occur if the air fryer is covered or touching flammable material, including curtains, draperies, walls, or the like when in operation.DO NOT place anything on the air fryer during operation.
  • DO NOT use the unit without the pot installed. Ensure food residue are removed and the tray is cleaned before each use.
  • DO NOT use the air fryer without the Sear Plate, wire rack, or air fry basket installed.
  • DO NOT spray any type of aerosol spray or flavoring inside the air fryer while cooking.
  • Use caution when inserting and removing anything from the air fryer, especially when hot.
  • Voltages can vary, affecting the performance of your product. To prevent possible illness, use an external thermometer to check that your food is cooked to the temperatures recommended.Prevent food contact with heating elements. Excessive food loads may cause personal injury or property damage or affect the safe use of the air fryer.
  • DO NOT place any of the following materials in the air fryer: paper, cardboard, plastic, roasting bags and the like.
  • Extreme caution should be exercised when using containers constructed of any materials other than metal or glass.
  • DO NOT touch hot surfaces. Air fryer surfaces, especially the Sear Plate, are hot during and after operation. To prevent burns or personal injury, Always use protective hot pads or insulated air fryer mitts and use available handles and knobs.
  • Spilled food can cause serious burns.Extreme caution must be used when the air fryer contains hot food. Improper use may result in personal injury.
  • Please refer to the Cleaning &Maintenance section for regular maintenance of the air fryer.
  • Cleaning and user maintenance shall not be made by children.
  • Press the power button to turn air fryer off and allow to cool completely before cleaning, moving and flipping for storage.
  • Unplug from outlet when not in use. To unplug, grasp the plug by the body and pull from the outlet. Never unplug by grasping and pulling the flexible cord.
  • DO NOT clean with metal scouring pads. Pieces can break off the pad and touch electrical parts, causing a risk of electrical shock.
  • DO NOT use the air fryer as a source of heat or for drying.on the plug blade. The entire supply cord is not suitable for replacement. If damaged, please contact us for service.
  • DO NOT place appliance on a stovetop or hot surfaces or near gas or electric burner or in a heated air fryer.
  • This appliance has important markings.

| Indicates to read and review instructions to understand operation and use

of product.

---|---
| Indicates the presence of a hazard that can cause personal injury, death or

substantial property damage if the warning included with this symbol is

ignored.

| Take care to avoid contact with hot surface. Always use hand protection to

avoid burns.

| For indoor and household use only.

KNOWING YOUR AIR FRYER

AIR FRYER
GETTING STARTED
  1. Remove all the packaging materials, stickers and labels from the air fryer.

  2. Draw out the Fryer Basket; wash the Fryer Basket and the Crisper Plbate in warm, soapy water or in a dishwasher, then rinse and dry thoroughly.
    X1S Smart Air Fryer Getting Started

  3. Place the Crisper Plate into the Fryer Basket, then push back the Fryer Basket into the air fryer.
    X1S Smart Air Fryer Getting Started

  4. Place the air fryer on a stable, level and heat-resistant surface. Keep it away from places that can be damaged by steam.
    X1S Smart Air Fryer Getting Started

Note:

This product must be placed at a distance of more than 85cm from the ground. During normal use, air must be circulated around the product. The top of the product should be kept open, and no obstructions should be placed. The left and right walls should be left with a gap of more than 10cm, and the rear wall should be kept. A gap of more than 10cm, do not block the ventilation openings, keep the use environment clean, and prevent cockroaches and other reptiles from entering the cavity.


  1. Do not block the exhaust port, otherwise it may cause product failure, please maintain it frequently to avoid garbage and dust blocking the exhaust port.
  2. Please do not place the product in a place with high temperature and humidity, such as a gas stove, a live area or beside a sink, etc.
  3. The product must be placed flat.
  4. If the indoor humidity is too high, this product cannot be used.
  5. Do not let the lid of the product bear excessive pressure.
USING YOUR AIR FRYER

POWERING ON
Step 1:
Plug the air fryer into the outlet and you will hear a “beep”. The button and the screen will light up, and the text pop-up window will pop out after the screen animation. After a countdown of 3 seconds, it will automatically enter the Home interface;
X1S Smart Air Fryer Powering On
Step 2:
According to your needs, choose the functions you need;

Note:

  • Click to return to the Home interface.
  • By default, long press for more than 3s to power off, and click to power on when power off.
  • In the non-working state, if there is no operation for 3 minutes, it will enter the standby mode.

PREHEATING

Step 1:
Enter the AUTO interface, click the PREHEAT button, the machine beep 1 times and starts to start;

Step 2:
The default preheat temperature is 400°F; the default preheat time is 3MIN. Customize the temperature and time according to your needs.

Note:

  • For the first use, We strongly recommend selecting the Preheat program to preheat your air fryer for 30 minutes in a ventilated space to remove strange odors.
  • For daily use, we recommend preheating your air fryer for 3-8 minutes before each cooking.

Step 3:
When there are only 2 seconds left in the preheating time, the air fryer will beep 3 times, and then a pop-up window will indicate that the preheating is complete

SELECTING PROGRAMS

HOME
Step 1:
You can choose your favorite recipes from Meat/Potatoes/SeafoodNegetables /Des-serts to cook.

Tip:
You can also quickly search for your favorite recipes for cooking according to the search box in the upper right corner.

Step 2:
Click on Meat, choose your favorite recipe, click Start.
X1S Smart Air Fryer SELECTING PROGRAMS

Tip:
For a more delicious taste of the food, please read the recipe steps carefully before clicking Start.

Step 3:

  1. Click Make to execute the current step and enter the current step interface.
  2. Click current step paused, click ■ stop current step, click Go to the next production step

Note:

  • Click the “Next step” button to browse the next step, click the “Previous step” button to return to the previous step, when it is in the Arst step, the “Previous step” button is grayed out and cannot be clicked, and when it is in the lost step, the “Next step” button is grayed out can’t clic.
  • Step A/B, A represents the Arst step in the recipe/B represents the total steps of the recipe.
  • Click        to return to the Home interface.
  • Click the floating box    | to enter the operation page of the current step. If there is no operation step, there will be no floating box.
  • There is a “Current Step” prompt above the current execution step.

Step 4:
The current step is completed, click the button to enter the next step operation interface.
Step 5:
Repeat step 3 until the recipe is completed, click OK to return to the Home interface.

Tip:

  • The recipe is Anished, please use it carefully so as not to get burned.
  • For more delicious taste of food, please toke out the basket and shake the food when necessary.

Step 6:

  1. When not in use for a long time or going out, please turn off the power Arst. After turning it off, unplug the power cord, otherwise failure or danger may occur.
  2. After use, it is necessary to clean the fryer and grill to prevent the remaining powder residue, oil stains, etc. from smoking or catching Are during the next baking.
  3. After cleaning, be sure to dry all ports, especially the heating coil.

AUTE

Step 1:
You can select the program you want from DEFROST/DEHYDRATE/PIZZA/ BACON/ CAKE/CHICKEN/STEAK/FRIES/FISH/PREHEAT and refer to the above steps forcooking.
X1S Smart Air Fryer Aute
Step 2:
Refer to the table below for the default temperatures and times for the 10 preset programs.

ICON|

PROGRAM

| DEFAULT TEMPERATURE|

DEFAULT T IM E

---|---|---|---
| DEFROST|

300°F

|

5min

| DEHYDRATE|

130 °F

|

60min

| PIZZ A|

365°F

|

9m in

| BACO N|

400°F

|

8min

|

CAKE

|

320°F

|

25min

| CHIC KEN|

40 0 °F

|

15min

| STEAK|

355 “F

|

13min

| FRIES|

400°F

|

15min

| FISH|

400°F

|

15min

| PREHEAT|

400 °F

|

3min

Note:
When the built-in menu is entered, the default temperature and time are displayed, and the temperature and time can be adjusted according to personal habits, food status or ambient temperature.

OPERATE
  1. Click the button page of the main menu to enter the operation page.
  2. Use the fine-tuning Time round button/+ – button to customize the increase/ decrease time. Use the fine-tuning Temp knob/+ – button to customize the increase/de crease temperature.

Tip:

  • When you enter the operation page for the first time after startup, the default values are 105°F and 00:00 in the temperature and time columns.
  • Increase/decrease the temperature by 5°F at a time with the temperatureadjustment+ – arrows. Adjust the temperature by 5°F increase/decrease by the round knob.
  • Adjust the time by the round button/+ – arrow as follows: more than 1 minute – within 10 minutes, once every half a minute, more than ten minutes, once every 1 minute.
  • Temperature minimum 105°F, maximum 400°F, time minimum 0 minutes, maximum 60 minutes.

Favorites

  1. Find the recipe you like in Home, click the to save, the  will light up, Click again to unfavorite.
  2. Click the Favorite button, you can see the favorite recipe, or you can cancel the favorite and the recipe disappears.
    Tip:
    Favorites can save up to 50 recipes, and there will be a pop-up prompt when the number of favorites exceeds 50.

X1S Smart Air Fryer Operate

WIFI
Click Enter the Distribution network interface.

  1. 1f there is no AiDOt, you con download Ai Dot through the operation guide of the Distribution Network interface or refer to the third port of the manual to download AiDot.
  2. if you have downloaded Ai Dot before, you can scan the code to connect to the machine directly.
    X1S Smart Air Fryer Wifi

SERVICES
Click You con view the four parts of User Manual/Warning/Settings/After-soles.
X1S Smart Air Fryer Services

User Manual
Click Start to go to the next page to start reading the software manual.
Warning
Precautions, please read all the contents before using the machine for the first time.
Settings
Contains three parts

  1. Device Information: Display the basic information of the device.
  2. Unbind the device: you can reconnect to other apps and control the device.
  3. Restore factory settings: Clear all data and restore the device to the original state.

After-sales
It contains after-sales service terms and after-sales emails.

Tip:

  • You are happy, we are happy1 If you have some good suggestions, you can let me know through our mailbox.
  • Our dedicated and friendly customer care team will work at full stretch to put a smile back on your face and restore your conAdence in Welov.

OVERHEAT PROTECTION

When the temperature of the air fryer reaches 440°F, the thermal protector inside the air fryer will automatically power off and the fryer will stop working. Please contact our after-sales service in time.

COOKING TIPS
  1. Ensure that the height of the food does not exceed the height of the fryer basket
    X1S Smart Air Fryer Cooling tips

  2. Do not put paper or plastic containers that are not heat-resistant into the air fryer.
    X1S Smart Air Fryer Cooling tips

  3. It is recommended to check the food through the window during the cooking process and pull out the basket to shake the food if necessary.
    X1S Smart Air Fryer Cooling tips

  4. For more tips and directions, check out the on line recipes in Ai Dot App!

USER GUIDE FOR AIDOT APP

APP Downloading and Installation

Option 1:
Search for AiDot from App Store/Google Play, then download and install it on your mobile device.

Option 2:
Scan the QR codes below to download and install.

APP Registration and Login

Start the ADot APP and register with a valid email address for the Arst time to log in.

Note:
For a successful connection, please allow AiDot APP to use your WLAN & Cellular Data when running it.

CONNECTION MODE

IMPORTANT:
For the air fryer:
Make sure the air fryer has been plugged into a socket and powered on.
For WiFi network:

  1. Before connecting, please turn on location service/GPS on your phone and grant all the permissions required by AiDot APP.
  2. Make sure your mobile device is connected to a 2.4GHz WiFi.
  3. Make sure you’ve entered the correct WiFi name and password when connecting.
  4. Make sure the air fryer, your phone and your router are close enough when connecting.
CONNECTION STEPS
  1. Enter the Air Fryer Distribution network interface.
  2. Start the AiDot APP and tap Add Device.
  3. Choose to add Manually.
  4. Select Appliance, And the air fryer, then select the model.
  5. Scan the QR code of the distribution network in the air fryer.
  6. After entering, click Next.
  7. Turn on WIFI, Bluetooth and location access on your mobile device.
  8. Confirm that the WiFi and password are correct.
  9. click Next.
  10. click Connect.
  11. The connection is successful, and the icon shows that the device is on line.
    Status
    You can check the machine status through the APP.
    Menus
    Recipes can be viewed on line.

MAINTENANCE AND CARE

IMPORTANT
  1. Before cleaning, unplug your air fryer and wait until it cools completely. You may draw out the fryer basket for faster cooling.
    X1S Smart Air Fryer Maintenance And Care

  2. Do not immerse the whole air fryer in water or any other liquid.
    X1S Smart Air Fryer Maintenance And Care

  3. After cleaning, always remember to dry all the parts, especially the heating coil.
    X1S Smart Air Fryer Maintenance And Care

  4. Use a clean and damp cloth to wipe the exterior of the air fryer.
    X1S Smart Air Fryer Maintenance And Care

  5. Dishwasher safe. Do not use metal utensils or abrasive cleaning materials to clean the nonstick coating.
    X1S Smart Air Fryer Maintenance And Care

  6. Clean the food residue stuck on the basket and the plate by soaking in warm and soapy water.
    X1S Smart Air Fryer Maintenance And Care

PACKING LIST

  • Air Fryers

  • Nonstick Crisper Plate

  • User Manual

TROUBLESHOOTING GUIDE

Fault Phenomeno Cause Analysis Solution
product not working Power not plugged in Insert the power plug into a

grounded outlet
bod power board| After-soles maintenance
no fried food| Too much food on the grill| If there ore too many ingredients, put them on the grill in batches
The set temperature is too low| Adjust the temperature to t he desired
Cooking time is too short| Increase cooking time
Fried food is not crispy| No traditional fried ingredient s| Appropriate fried snacks can be used. if there is no fried food, lightly brush a layer of oil on the surface.
Unable to put the grill into the fryer smoothly| There is an object interfering inside the fryer| Install the grill correctly adjust the height of the food and place the food according to the specified capacity
Too much food on the grill to close the lid
white smoke| cooking greasy food| There will be a lot of smoke leakage when roasting greasy food, which is a norm al phenomenon
There is still grease residue left in the fryer from the last bake| Be sure to clean the fryer after each bake
Control panel displays abnormally| Damaged control panel| Please contact the after-sales service unit for processing
Damaged circuit board electronic components
touch failure| Damaged circuit board electronic components| Please contact the after- sales service unit for processing
Damaged electronic screen
Poor internal wire contact

WARRANTY POLICY

Your appliance has the benefit of our guarantee which covers the product for 18 months from the date of original purchase. This gives you the reassurance that if within that time, your appliance is proven to be defective because of either workmanship or materials, we will at our discretion either repair or replace your appliance. The appliance must be correctly installed, located, and operated in accordance with the instructions contained in the user manual. The guarantor disclaims any liability for accidental or consequential damage.

The Guaranteed conditions
  • Documentary proof of the original purchase date is provided.
  • The appliance has been installed and operated correctly and in accordance with our operating and maintenance instructions.
  • The appliance is used only on the electricity supply on the rating plate.
  • The appliance has only been used for normal domestic purposes.
  • The appliance has not been altered, serviced, dismantled or otherwise interfered with by any person.
  • Any parts removed during repair work or any product that has been replaced become our property.
  • The guarantee is not transferrable if the product is resold.
The Guarantee does not cover
  • Accidental damage, misuse, or abuse.
  • Replacement of any consumable item or accessories.
  • Repairs or replacements are required as a result of authorized repairs or inexpert installation that fails to meet the requirements contained in the user guide or instruction book.
  • Repairs to products used in commercial or non-residential household premises.
After sales service

Please keep your purchase receipt or other proof of purchase in a safe place as you will need to show us this document if your product requires attention within the guarantee periods. Please also record your product details below, which will allow you to access our services more quickly and help us identify your product. Model number S/N number Purchased from Date of Purchase.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

CONFORMS TO UL STD.1026&CERTIFIED TO CSA STD.C22.2 N0.60335-1&60335-2-9&CAN ICES-003(8)/NM B-003(B)
Welov Life Limited 6/F., Manulife Place, 348 Kwun Tong Road, Kowloon, Hong Kong
welovhome.com

FCC Warning
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IC warning
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science
and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled
environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation
distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other
antenna or transmitter.
Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users.


X1S Smart Air Fryer

CUSTOMER SUPPORT
[email protected]
www.welovhome.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

WELOV User Manuals

Related Manuals