HEALTECH ELECTRONICS Controlled Electronic Suspension Eliminator Module User Manual
- August 21, 2024
- HEALTECH ELECTRONICS
Table of Contents
HEALTECH ELECTRONICS Controlled Electronic Suspension Eliminator Module
User Manual
Foreword
Congratulations on your purchase of a Heal Tech Controlled Electronic Suspension Eliminator module (CESE). This unit enables the trouble-code free disconnection of any electronic suspension component from the bike’s main wiring harness.
The HealTech CES Eliminator simulates the presence of the electronic suspension component, so the ECU won’t detect its absence and won’t throw an FI error code. The model-specific connector makes installation quick and easy, eliminating the need to alter the bike’s original wiring.
Note: Each electronic suspension component requires a separate CESE module (2pcs at the front, 2pcs at the rear).
Installation
Please make sure to order the matching part number for your bike. Use the Product Advisory on our website to get the compatible part numbers for your motorcycle.
These instructions are applicable to a wide range of motorcycles and describe
the main install steps needed for a successful installation. You can find
motorcycle specific Supplementary Manuals on our website. Please visit:
www.healtech-electronics.com/CESE
Disclaimer: Do not attempt to install the product if you don’t have basic mechanical skills.
HealTech Electronics Ltd. and its distributors shall not be held liable for any loss or damage caused by improper installation.
- Locate the electronic suspension component you wish to bypass/remove from the motorcycle.
- Unplug the actuator motor’s connector.
- Plug the CESE module into the wiring harness connector.
- Secure the CESE module with the supplied Velcro pad.
Warranty
The unit is completely sealed and epoxy encapsulated, which gives extreme protection for the internal parts from shocks, vibrations and water.
To ensure trouble-free operation from the start, all units have been extensively tested prior to shipment.
Our dealers are offering a 30-day money-back guarantee on HealTech products,
thus you will get your money back if the product does not fulfil your
expectations (all parts must be returned in original condition for full
refund).
Furthermore the product is covered by our 2-year replacement warranty from the
date of purchase.
Specifications
- Operating temp : -40°C to +80°C (-40°F to +176°F)
- Max. supply current at 12V : 400 mA
- Supply voltage : +8V to +24V
- Weight : 33g (1.16oz)
- Size: 50 x 30 x 17 mm (1.9 x 1.2 x 0.6 inches)
- Waterproof: IP68
- Plug ‘n Go design
CESE User Manual [rev. 001]
www.healtech-electronics.com/CESE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>