blitzrock CT3PRO Bluetooth Headset User Manual

blitzrock CT3PRO Bluetooth Headset

Specifications

• Compliance : Part 15 of the FCC Rules
• RF Exposure : General RF exposure requirement met
• Portable Use : Can be used in portable exposure conditions without restriction

Product Usage Instructions

Potential Interference:
While the product is designed to minimize interference, there is no guarantee against interference in all installations. If you experience interference with radio or television reception, consider the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to a different circuit than the receiver.
• Seek assistance from the dealer or a radio/TV technician.

FCC Compliance:
This device complies with Part 15 of the FCC Rules. It is designed not to cause harmful interference and must accept any received interference, including that which may cause undesired operation.

Radiation Exposure:
The device has been evaluated to meet general RF exposure requirements. It can be used in portable exposure conditions without restrictions.

PRODUCT INTRODUCTION

Please use the provided Type-C Charging Cable to charge.

CHARGING

1. Please remove the insulating sheet and all protective stickers before the first use.
2. Put the Headphones into the charging case and the Headphones status indicator will light up.
3. Charging : 0
4. Fully Charge : The light goes off. The charging case can be fully charged in 2 hours.

PAIRING

• Automatic pairing after opening the lid.
• Pairing mode(indicator on one earphone only).
• Power on and connected to a device.

FUNCTION

Please turn on game mode when you notice that the sound is lagged behind the video
Game mode is switched off by default.

POWER ON/OFF

TROUBLESHOOTING

1. Charging case not charging:
   Check if the power adapter is working, or try using a different charging cable.

2. Earphones not connecting to Bluetooth or Bluetooth signal not found:
   Open your phone’s settings, delete the Bluetooth pairing records, and then search for the earphones Bluetooth signal to reconnect.

3. Earphones won’t power on:
   Ensure the charging case has power and try charging the earphones for a while before attempting to power them on.

Restore Factory Settings

• Put the earphones into the charging box and press and hold the touch area of the charging box for 8 seconds.
• When the red LED light outside the charging compartment stays on for 1 second, the clear the recording is completed.

Blitzrock APP Pairing

• Step 1:
  Blitzrock APP can be downloaded from the Google Play and Apple APP Store.

• Step 2:
  Bluetooth pairing with your headphones.

FCC Warning Statement

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FAQ’s

Q: What should I do if I experience interference with radio or television reception?
A: Try reorienting or relocating the antenna, increasing separation between devices, connecting to a different circuit, or seeking help from a professional technician.

Q: Is the device compliant with FCC regulations?
A: Yes, this device complies with Part 15 of the FCC Rules.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>