BaByliss AS122E Smooth Finish Hair Dryer Brush Instruction Manual

AS122E Smooth Finish Hair Dryer Brush
Instruction Manual Made in China
AS122E – B47a

Read the safety instructions first.

INSTRUCTIONS FOR USE

• Ensure the hair is 80% dry and combed through to remove any tangles.
• Create your parting and divide the hair into sections ready for styling.
• Secure the selected attachment onto the handle. To interchange between the attachments, refer to the ‘Changing the Attachments’ section.
• Slide the switch to the heat setting suitable for your hair type to turn the appliance on.
• After use, slide the switch to the ‘0’ setting to switch off and unplug the appliance.
• Allow the appliance to cool before storing away.

Changing the Attachments

• Place the attachment onto the handle and line up the two indents with the buttons on the handle.
• Push the attachment onto the handle until it clicks into place.
• To remove an attachment, press and hold the two buttons and pull the attachment away from the handle.

38mm Thermal Brush Attachment

• Place the brush head under a section of hair, close to the roots.
• Use the brush to lift the hair at the roots to create volume.
• Slowly move the brush down along the section, towards the ends of the hair.
• Repeat for each section of hair.

25mm Firm Bristle Brush Attachment

• Place the brush head under a section of hair, close to the roots.
• Use the brush to lift the hair at the roots as you style.
• Move the styler down the section, towards the end of the hair.
• Repeat for each section of hair.

20mm Soft Bristle Brush Attachment

• Use the soft bristle brush attachment to smooth the hair.
• Place the brush head under a section of hair, close to the roots.
• Use the brush to lift the hair at the roots as you style.
• Move the styler down the section, towards the end of the hair.
• Repeat for each section of hair.

Smooth Blow-Dry Brush Attachment

• Place the brush head under a section of hair, close to the root with the bristles pointing upwards.
• Use the other hand to pull the hair section taut against the brush head.
• Gently slide the brush head through the section of hair, until you reach the ends.
• Repeat for each section of hair.

Heat Settings
There are 3 heat settings plus a cool shot button. Slide the switch to the first position to select the low heat ‘I’, the second position for the medium heat ‘II’, and the third position to select the high heat ‘III’. Press and hold the ‘*’ button to activate the cool shot.
Please note: If you have delicate, fine, bleached or coloured hair, use the lower heat settings. For thicker hair, use the higher heat settings.

CLEANING & MAINTENANCE

To help keep your appliance in the best possible condition, please follow the steps below:
General

• Ensure the appliance is switched off, unplugged and cool. To clean the outside of the appliance, wipe with a damp cloth. Make sure that no water enters the appliance and it is completely dry before use.
• Do not wrap the lead around the appliance, instead coil the lead loosely by the side of the appliance.
• Do not use the appliance at a stretch from the power point.
• Always unplug after use.

Cleaning the Filter

• Ensure the appliance is switched off, unplugged and cool.
• Holding the handle of the appliance firmly, lift the filter open from the grooves close to the cord bushing, this will enable the rear filter to open.
• Using a soft brush, clean any hair and other debris from the filter.
• Replace the rear filter by closing the filter lid shut.

BABYLISS SARL
ZI du Val de Calvigny
59141 Iwuy
France
www.babyliss.com
FAC 2023/03
IB-23/013

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>