BZB GEAR BG-UPTZ Series Universal 20x PTZ Camera User Guide

BZB GEAR BG-UPTZ Series Universal 20x PTZ Camera

BG-UPTZ Series

The BZBGEAR BG-UPTZ is an enterprise-grade IP Streaming PTZ camera featuring simultaneous video output from HDMI, SDI, USB, and IP streaming. High grade lenses deliver pristine image quality at resolutions up to 1080p @ 60 Hz. Exceptional mechanical craftsmanship and high-grade components result in responsive and quiet operation. The latest compression algorithms and a diverse array of video outputs give you the ability to use these cameras with nearly any setup. This camera is ideally suited for a broad range of applications -from classrooms and boardrooms to houses of worship and live productions.

Package Contents

• 1 x BG-UPTZ
• 1 x 12V/1.5A Power Supply
• 1 x User Manual
• 1 x RS232 Control Cable
• 1 x IR Remote Control

1. Camem Lens
2. Camera Base
3. Remote Control Receivng Indicator
4. Infrared Receiver
5. Tripod Screw Hole
6. Screw Hole for Tripod
7. HDM Output
8. USB 3.0 Output
9. SDI Output
10. Audio Input lnterface (Line-in)
11. Rotary DIP Switch
12. RS232 Control Interface (input)
13. RS232 Control Interface (output)
14. RS422 Interface (Compatible with RS485)
15. Network Interface (LAN)
16. DCl2V Input Power Supply Socket
17. Power Switch

Mounting Instructions

Wall Mounting

Ceiling Mounting

RS-232 Interface

RS-232 Interface Definition

RS232 Mini- DIN 8 port Definition

WebGUI

The BG-UPTZ camera includes a built-in WebGUI allowing for control and management of advanced features. Use the following instructions to access the WebGUI.

1. Launch a web browser and enter the IP address of the unit (default 192.168.5.163).
2. The BZBGEAR login page will appear.
3. Enter your login information (by default Username = admin Password = admin).
4. Select the Login button.

Problems connecting to your camera?

Check out our Knowledge Base athttps://bzbgear.com/knowledge-base/ for more information and stepby-step guide.

My camera has no picture| Power switch is off, bad connection, incompatible resolution, camera lens is obstructed|

• Check the power switch on the back of the camera
• Check connections/replace cables with new ones
• Use IR remote or WebGUI to change to a resolution that is compatible with your display
• Check computer and program settings to ensure USB is discovered

---|---|---
My IR remote control doesn’t work| The camera’s IR sensor is blocked, batteries are dead, sunlight is interfering with the IR signal|

• Ensure you have a clear line of sight from the remote to the front of the camera base
• Replace the batteries
• Ensure the camera is out of direct sunlight

I cannot access the camera’s WebGUI| The camera is not connected to the network|

• Check connections
• Verify your camera’s IP address using an IP scanning tool
• Ensure your computer is connected to the same network as the camera

I have no image from my USB connection| Your USB device is not being discovered|

• Make sure you’re using a USB 3.0 cable
• Replace the cable with a shorter one (6 feet or less)
• Try a different USB port on your computer

https://bzbgear.com/support/ | 1.888.499.9906 | [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>